Envy 17: two pilots do not exist to win 10

Similar Questions

• HP Envy 5660: Two pilots? What is HP6A36DC?

  Greetings:

  I just upgraded to Windows 10 of 8.1 and see two drivers listed for my printer HP Envy 5660:

  (1) series HP Envy 5660 (network)

  (2) HP6A36DC (HP Envy 5660 series)

  The two are listed under devices as above.  I remember not two registrants before the upgrade.  Should I have them both?  Who should be the default?  Can I delete one?

  Thank you-

  L

  Hi, HP6A36DC is the default entry for your wireless printer to win 10. You can delete if you want to keep the network 5660 HP envy as the default printer.

• Dell XPS: HP Envy 5530 print processor does not exist

  The printer is installed and works fine wirelessly.  Fix an update or antivirus protection and he was no longer a compatible printer PictBridge including PDF printer. I don't know when it happened.

  I tried different things as suggested by microsoft support. Copy the folder Prntprocs/X 64 on C:/windows/system32/spool/who was missing winprnt.dll from a work computer.

  CHecked Reg Key and winprint.dll driver added to Windows NT. There were x 64.

  Checked print spooler was carried out.

  Local printer by USB could be installed correctly.

  Puzzled!

  Hello

  If you have tried the steps as described in the post and if the problem persists, try the steps as shown in the above the below URL.

  http://support.Microsoft.com/kb/929833

• Windows path not found "\DOSDevices\c:\pedriver.txt does not exist.

  All of a sudden when I try to boot my system WinXP SP3, I get a 'there is no \DOSDevices\c:\pedriver.txt' to start Win XP with the Windows Log On window. When I click OK to clear the dialog box, and then click OK to log on to Windows, I hear the sound Log ON, but when the sound is done, I hear the sound Log Off and the system returns to the Windows Log On screen, but without"\DOSDevices\c:\pedriver.txt does not exist" on the Win XP startup dialog box.

  Reboot, hard boots, will not fix the problem. However do all start causes"\DOSDevices\c:\pedriver.txt does not exist" on Win XP startup dialog box back.

  I have slave drive to my laptop and run my Zone Alarm Sucurity following the control of the virus and Malwarebytes [after definition updates] to search for malicious spyware and the player but it coomes clean place.

  Is there a way to check the registry on a remote boot disk?

  .. got answers?

  Thanks for the reply fast Sam!

  After posting my Q, I decided ry as troubleshooting steps myself since I found nothing on Google about this error.

  I slaved the drive via the USB port on my Win7 laptop, then I ran my ZASS virus protection, who come clean, I ran Malwarebytes looking for spyware, which also came clean, so I ran CHKDSK, replaced the drive and it started without the annoying dialog box or the journal the / disconnect vicious.

  Unfortunately it seems that exhausted CHKDSK ~ 110 GB of my concert ~ 130 HD space... know a way to reclaim this free space?

  I have posted a separate Q on this issue.

• HP envy 5530: E print app on my phone says this printer does not exist.

  I am trying to add my printer to my application on my phone and I get the error "this printer does not exist or you do not have access to him."

  I went on HP Connect site and it shows that my printer is online and ready to use.  I checked to make sure that everything has been updated. I'm not sure what I'm doing wrong.

  Here are a few extra in case info

  HP Envy 5530

  Windows 7 64 bit

  Thank you

  Hi @mcmoran2004

  Welcome to the Forums of HP's Support.  I understand that you get an error message when you try to add your printer to your HP ePrint app on your mobile device.

  If you get this error message when you try to add the printer to the application using the ePrint printer e-mail address, then follow the steps below.

  1. Please delete the app on your mobile device.
  2. Please turn off your camera mobile for a total of 30 seconds, and then power back on, please.
  3. Once your mobile device has completed its startup routine please download and install the application again.
  4. Please activate the application using your personal email address.
  5. After the activation of the application please try to add the printer by its address of email ePrint.
  6. If you still get any error message then, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you do not live the USA/Canada region, please click here to find the number of Technical Support for your country/region.

  Please let me know the results.

• Two issues I think are linked: connectivity and Windows Firewall status. Service dependency dose not exist or has been marked for deletion.

  I reinstall a Menory card to check the weather it was defective. I also reset CMOS as part of the process. (Recommended HP) I found that the card was faulty. After reboot, I had security alerts that Windows Firewall did not work. And also unable to connect to the Internet.  I restarted the Sprint after disconnection and reconnection there. (USB) I was able to get the Internet, but the red X connection
  on the screen in the taskbar never changed to "land". Hovering on it said "dependence on the dose of service not exist or has been deleted. Everything I tried for this problem, either online or offline has failed.
  Pretty much the same thing for Windows Firewall, I can't change the settings, turn on and dosen't snap so. Eror code 0x6D9. Also get code MSSvcservice 87 (0 X 609). Both are still declining. Can't get in Windows Firewall / Advanced to change settings or turn on firewall. Cannot find Microsoft Firewall Client ISA server, look like, go.
  Right now I'm pretty frustrated, been working on this a day and half and I'm pretty well lost.

  Problem fixed, would run recovery.

• iCloud says it is complete, but it is count files that do not exist

  Hello world.

  I have a problem with iCloud reports that it is full, but when it calculates the space that I used, it's counting the things that have been deleted and removed from all appliances (including bins/albums "recently deleted").

  I was testing my iPad battery life, because I want to do a shoot and I wanted to see how long I could record for. On both devices, I made a video of 10 GB and a 20 GB video.

  As soon as I finished filming, I deleted the videos. Also, I went into the album "recently deleted" and removed them.

  A few days later, however, I got a warning: my 50 GB of storage iCloud was completely full, and had ceased to backups.

  I looked at my MacBook Photos app, and of course, the videos have been synchronized and downloaded, despite me to delete and remove the "recently deleted".

  I deleted the videos from my MacBook photo library and once again removed from the tray.

  My photo library real iCloud should take 19 GB. However, when I looked at the Finder to "Library.photoslibrary Photos", it took 49.5 Go. I dug into the library, and despite videos being removed from the MacBook photo library, the actual files themselves were still sitting here in my library.

  In addition, iCloud had ceased to sync my actions regarding these two files, so deleting a device has not removed the from all devices. I had to go through this same process on my Mac Mini, my iPhone etc.

  But on all my devices, if I go to "storage utilization & iCloud", he always tells me that my photo library iCloud is 49.5 gb and my storage is full.

  These files do not exist on any device. They are not visible when I go on iCloud.com - they are nowhere.

  What can I do? Still, the synchronization does not reliable (a few photo editing are not synchronized between devices now and some destruction of photo are not replicated between devices - obviously, 'something' is a little messed up because of these two files).

  My only option will be to disable and remove my iCloud photo library and wait 30 days?

  If anyone can give me any help, I would appreciate it.

  The iPads are: Mini 2 and Pro, originally in iOS9.3.5 and now on 10.0.1; Macs are: retina 2014 of the MacBook Pro and Mac Mini end of 2012, both on OS X 10.11.6. I've done different things, like turning off iCloud photo library on all devices, deleted photos, emptied bins, rebooted devices, switch things on.

  Thank you all

  What happens when you turn on the backup/disable under settings > iCloud?

• Problem with playing MP4 on a T60 1951-46U; problem does not exist on a T60 2623 - 4

  I have three renovated seller ThinkPad T60 systems running XP Pro/SP3: two of them are T60 1951-46U, the third is a T60 2623-4.

  A T60 1951-46U exposes a problem using VideoLan worm 2.0.7 to read MP4 files: video and game ok background music but the superposition voice is scrambled.

  This problem does not exist on the two other T60s. All these systems are (more or less) the same setup.

  Any help to fix this would be appreciated.

  Best regards

  Hi, thanks for your response. Sheeplishly I have to say that I found the problem- and it has nothing to do with the T60 in question. Through several pluggings and unpluggins of the speaker cord while the problem has continued to exist at last, I found that the plug of the power cord 3 mm was did not correct contact then that in the audio port. Very strange problem. The background music in the video was ok, but not the vocal part of the audio. The one good thing that comes from the question is that I have found this community is and found that it is both active and reactive. Yet once, thank you for your reply (and I'll look into the ThinkVantage System Update for the driver updates). Best regards

• D110: Printer Destination does not exist - for D110 all-in-one

  This printer is connected via a Charter Communications wireless router wireless. Printing and scanning has been working well. 2 nights ago he stopped and we started getting the message "the destination printer does not exist" in the window of the printer.

  I am currently working on an iMac 10.6.8 running, but the same thing happened on a Macbook running the same. I just tried on this macbook again and he did print, although he had problems yesterday. Of course I tried earlier once more on the iMac and it did not work. I can print a page of test here, however.

  I tried the following:

  1 remove the printer and selling it.

  2 download a new copy of the driver and install it.

  3. follow the instructions to change the IP address via the web interface, stop the router and printer and then start up the two, router first, then the printer after it increased. relisted to the printer. The iMac certainly sees the printer for purposes of installation and status, but not for printing.

  What now?

  Thank you

  Ellen

  Hi@Ellen_B,

  I see you are having problems printing from Mac. I will definitely do my best to help you.

  Print a Network Configuration page to get the printer IPv4 address.

  Go to settings, wireless, print the Network Configuration Page.

  If you have a valid IPv4 address for the printer, then try and access the Web built-in to the printer server.
  Type the IP address in the address bar of your web browser. (Safari)

  It loads the page Web has?

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If multicast is disabled on the router, you will not be able to add the printer as a Hello device.

  If you encounter network problems, and then add the printer via the IP protocol.

• 2 printers - can print only a - print processor does not exist?

  I have two printers - one that I just bought.  I installed the new without any problems, that is a series of Deskjet 3510.  The other is a series of deskjet 6980.  I want to use two printers, but when I try to print the 6980 is not in the drop-down list.  I see when I look at the printers in my computer, but he can't see it when I try to print.  I tried to reinstall the 6980 and it says that the print processor does not exist.  Help, please!

  There's a troubleshooter created by HP

  Please try the HP printer installation wizard

  or use this link: www.hp.com/go/tools

• Vista has the GMT + 1 time zone of West Africa, but it does not exist?

  Vista has the GMT + 1 time zone of West Africa, but it does not exist?

  Google does not, and is not on this list of African zones.
  Thank you
  (I couldn't find a topic in the drop-down below).

  Hello

  http://www.timetemperature.com/Africa/africa_time_zones.shtml

  TIME ZONE HOURS AFRICA

  Africa uses six time zones. From West to East, time zones in Africa are Cape Verde time (GMT - 1), Greenwich Mean Time (GMT + 0), West Africa Time (GMT + 1), Africa Central time (GMT + 2), East Africa Time (GMT + 3) and time Mauritius and Seychelles, which are all two (GMT + 4). Daylight Saving Time (DST) is not used in most of Africa. However, the countries of Egypt, the Morocco, Namibia and Western Sahara respect Daylight Saving Time. Tunisia and Western Sahara ended the use of DST in 2009. The dates of beginning and end of summer time are different in each of the three African countries

• Removal of startup parameter error: the specified Service does not exist as an installed Service

  Hello

  I am currently removing two services in Autoruns, for the reason that they are highlighted, and that means that it no longer exists. However, I'm running into some trouble while he was trying to do, I get the following error:

  Removal of startup parameter error: the specified Service does not exist as an installed Service

  For diagnosis, I downloaded my log of Autoruns on OneDrive text file and you can view it by clicking here.

  Thank you

  Party of Lighthouse

  My research yesterday using Google yesterday suggested malware damage.

  Select Start, all programs, accessories, right-click right-click command promptand click run as administrator on the menu drop-down... Type cd\ and press ENTER. Type "chkdsk c:/r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter it when asked if you want to run chkdsk on restart the computer. Type exit, press ENTER, and then restart the computer.

  Please run the SFC system and say if she cannot fix corrupted files: http://support.microsoft.com/kb/929833

• error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

  Hello

  I get this error when you try to run the sample of cards on the corrugation Simulator:

  Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

  The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

  Someone else have this error and know why?

  PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

  PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

  Thank you

  The two directories (in the extensions directory and maps project directory) have permissions to 777.

  But you gave me an idea...

  It turns out that simply by putting

  "Packages".

  in setting output wasn't enough, I need the full path

  for example: "/ Users/username/RippleSites/Maps/packed."

  and presto, now it works!

  Thank you!

• Delete or remove the disc hard which does not exist

  Windows 7 Professional, 64-bit, all updates have been made.  Explorer > computer > drives shows disk space (q) but no other info like x GB free y GB, and there is no box with a blue line.  "By clicking on the disc (q) Local triggers an error box ' there is no location: Q:\ is not accessible.  Access is denied. »

  In looking at Start > computer > Manage > storage > Disk Management (q) does not appear while all other disks are listed.

  With the help of Jv16 Power Tools 2014 to search the drive (q) it just says "Directory does not exist."

  Digging further, I found the registry under HKEY LOCAL MACHINE\SYSTEM\MountedDevices\ watch? \VOLUME{ff00752d-F6E4-11E2-853d-002564e38f71}

  That same volume appears in hundreds of Warning Messages in the start menu > computer > Manage > system tools > event viewer > Windows Logs > request as a VSS 12348 warning.  In some cases there are two second VSS in the same warning messages.

  How to fixed the problem?  Fictitious (q) hard drive may be removed or deleted?  The registry entry should be deleted?  My guess is that a program is trying to access all mounted devices that triggers the VSS warning.

  Any help would be greatly appreciated.

  dax1792:

  Thank you very much, the problem disappeared after the reference, but with a slight difference.  I have been using Microsoft Office 365 Home Premium for a few months.  Looking at the Uninstall list, I found three ad for Microsoft Office, two for the 2010 version.  I uninstalled both versions 2010 and everything is fine now.  The Q drive disappeared.

  Thanks again.

• Understanding behavior of the not exists Clause

  I do not understand why the following selects does not produce the same result set. First, I did not write and the second that I did:

  Select ftvorgn_orgn_code, ftvorgn_eff_date, ftvorgn_nchg_date

  of ftvorgn one

  where a.ftvorgn_eff_date > (sysdate - 300)

  and not exists (select ' x'

  of ftvorgn b

  When trunc (b.ftvorgn_nchg_date) = trunc (a.ftvorgn_eff_date)

  and b.ftvorgn_orgn_code = a.ftvorgn_orgn_code);

  Select ftvorgn_orgn_code, ftvorgn_eff_date, ftvorgn_nchg_date

  of ftvorgn

  where ftvorgn_eff_date > (sysdate - 300)

  and trunc (ftvorgn_nchg_date)! = trunc (ftvorgn_eff_date);

  The second produced a result set of 35 lines, while the first one returns only 4 lines that are a subset of the second result set.

  I would like to understand the difference between the two queries.

  The second query compares trunc (ftvorgn_nchg_date) and trunc (ftvorgn_eff_date) on the same line; the first query checks the lines with the same ftvorgn_orgn_code. If it finds a match on another line, then the current line will not be selected. This is the reason why she returns fewer rows than the other.