ENVY 5660: 10 windows will not recognize my scanner
My computer tells me that I need a WIA driver. How can I do this?
I called HP Support. 15 minutes later, the problem has been resolved.
Tags: HP Printers
Similar Questions
-
My windows will not recognize my CD/DVD drive
My computer crashed recently and since then windows will not recognize my CD/DVD drive. My removable disk (e :)) is there, but I was told that windows cannot access the disk.) Also when I try to eject a developed error warning.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
Windows will not recognize the password
I have reset the password using windows live reset option, but now my laptop will not accept the password and I am more able to access the laptop at all. I don't know what else to do. Help, please.
If you change the Windows through Microsoft Account password online, it will update when you connected to the internet via your computer and when the PC is turned off or disconnected from the internet, you need to use your old password.
-
not sure that this area is for.
Hello:
I'm not sure what you mean in regard to this area, but this place is to explain in more detail the nature of your question.
I see that HP did not include the USB3 drivers on your laptop support page, so the most likely reason that do not have USB3 ports is because you need to install the driver for the USB3.
Use the one directly from Intel. Download, unzip and run the setup.exe file.
-
10 Windows will not recognize USB-6211
Well, several hours to uninstall and reinstall later, the device is recognized again. It even works in Labview.
The only thing that happened between the work and does not, it is for other Labview products trial period expired. Maybe messed something up or maybe not.
I just hope that it still works now.
-
Windows 7 will not recognize driver for HP Scanjet 5370c scanner
I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer. I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date. After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed. I tried Udating driver in Device Manager, but none were found on the system. I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it. I do not receive a message about the driver being made and has been disabled.
Where would the driver have been installed under Windows and what would be the name of the file? Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer. I came on this forum that says HP email support is no longer in effect for this scanner. Scanner was working fine under Windows XP. Thank you in advance for any help you can give me.
Thank you for your response. I posted the same question to the Board of Directors Microsoft as well. One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7. I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7. They have a list of more than 100 scanners supported by the program. So, anyone interested should check the list before you buy the program. No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one. Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.
-
After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10
After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10
Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support
-
I have a Dell XPS 420 I got help from this forum - reloaded Windows XP - reformatted successfully in car and now have Windows XP on the drive. When I try to connect to the internet and set up this internet connection - will not recognize the modem. When I put the disc inside modem will automatically the configuration menu of the computer. I don't know what else to do. I have AT & T internet service that worked perfectly before the reformat Windows XP works fine.
Hello
Refer to this link and check:
It will be useful.
-
For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?
Hello DavePerdue,
Thank you for your message. Click HERE for your driver from the HP website. It seems that it just took some time to get the driver online and available for download.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows 7 will not recognize the dvd drive
Windows 7 will not recognize the dvd drive, although it worked well for more than two years. Now I can't access it to install new software.
It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.
It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management. If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?
What now? Is turn off the power, my only option? What happens if it is not yet recognized after that?
Hello
If the drive is viable:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Windows 7 will not recognize my iPad
Windows 7 will not recognize my iPad when it's connected via USB port
Hi Richard,
1 have you tried the steps in the post above?
2. the problem occurs only with the ipod?Method 1
I suggest you run the hardware and devices Troubleshooter and see if that helps.Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-TroubleshooterHardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-usMethod 2
Try the steps from the following link (applies to Windows 7)Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices -
Historical files Windows 8 will not recognize the new external hard drive
I just bought a new laptop (Sony Vaio) with Windows 8Pro (System op 64-bit, Intel I7, 1THD). One of the reasons is that I have approached Win8, is I liked the concept of the new 'File History' backup utility I started to use the computer with an ext WD My Guide of the HD and the history of the files seemed to work. Then the drive external hard went wrong and I just bought a new WD My Passport 2 t ext HD. Historical files will not recognize this drive. He keeps asking the old drive. When I attached the new drive and go to the screen "Select drive", it says "no usable drives are detected. Please connect a drive... "I know that the drive is there because I see under 'My computer' and I can copy files to it. But the history of the files do not recognize. WD, I called and they helped me to update drivers and even made a update firmware on the drive, but nothing is done. I tried several fixes suggested in a few links Microsoft 'how file history works... '. «, «What to do if the file history works more...» ", etc, but all without success. The tech also remote BestBuy Geek squad my computer and tried EVERYTHING and could not get it to succeed. BTW, it's not the HD post because put us on another computer to WIN 8 and Hx file found immediately. Tech people thought that it was a deep registry with Win 8 problem and their only suggestion was to reimage my computer with the original recovery disk. But who is going to cost me an arm and a leg.
I'm not very tech savvy, so I know there must be something very simple, I'm do wrong or overlooking and I hope that some dear soul on this forum or someone from Microsoft can give me an idea or two. Thank you very muchI was having this same problem, but then noticed a presentation text easy to miss in the historical files tool that says that the disc "cannot be a part of a library" or something like that. In my case, I had files on my external hard drive that have been included in several libraries... and none that I really used, so I removed the files (and deleted the libraries for good measure). A fast system restart later, and my player does not appear.
I don't know why MS did not propose it again for this thread as the more obvious thing to check, but there you have it. Something simple and quick to check that could save you some frustration.
-
Windows 8 will not recognize my product key!
I have had up to Windows7 for windows 8, Microsoft sent an email me my product key, but I want to do a clean reinstall. When I enter my product key reinstall windows do not recognize.
When I ranked up 7 to 8, I kept all my old settings, but this causes all sorts of problems so reinstall it.any help please, I tried Microsoft on the phone but I do not understand what he says! both for technical help from Microsoft! (USLESS)
Ken
Make sure that you enter the characters.
Do not enter hyphens (hyphen) who will be registered automatically.
Do not press the SPACEBAR when you enter the product key.
Make sure that you do not enter the wrong characters.
-
Flight DVD will not recognize on Windows 7
Original title: bought a dvd from TURKEY. Does not open with windows 7. what I can do.
Because of paragliding in Turkey and bought dvd of the flight, but windows does not recognize the disc. Help.
Hello
1. are you referring to Microsoft Flight? If so, which version of the Microsoft Flight game you try to install?
2. what happens when you try to insert the DVD of the game? You receive an error message?
3. are you able to read other DVDs on your computer?If you are referring to Microsoft Flight, please visit the following link to check the compatibility of the Microsoft Flight.
Windows 7 Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspxSee also:
Microsoft games: InstallShield Error Messages
http://support.Microsoft.com/kb/910816
Please provide us with more information to help you further.
-
Windows 8 will not recognize discs in my dvd, DVD or CD player?
I've upgraded to Vista to 8. Windows * does not recognize the discs loaded in the dvd player. Computer, you can see the drive but it won't read the disc in the drive. I tried to update the drivers, 8 says that they are up-to-date. I have run the Diagnostics Dell, said that my computer works well. Have uninstalled and reinstalled the drivers for the dvd drive, no change.
I installed windows media center, without change. Do I have to install a soft DVD and which?
This has been the most frustrating windows upgrade of my life
Hello
Readers appear in the computer?
Maybe you are looking for
-
Need the CD of recovery for Satellite A40-216 PSA40E
I need the recovery CD for the Satellite A40-261, model No. PSA40E-OEWDE-IT Can someone show me were to download? Thank you.
-
Windows has recovered from and unexpected shutdown. How should I do?
Signature of the problem:Problem event name: BlueScreenThe system version: 6.1.7600.2.0.0.256.1Locale ID: 1033 More information about the problem:BCCode: d1BCP1: 00000001108B 4428BCP2: 0000000000000002BCP3: 0000000000000000BCP4: FFFFF88001581046OS ve
-
ASAX Blueprint not to pick up the customizations of presentation
When I create a plan ASAX in orchestrator workflow that uses the dynamic properties on presentation settings, these properties are not propagated to the EHR Architecture and must be entered manually. It's not big but the deal breaker is that rebuild
-
I'm a designer and I sell my creations, which plan to choose?I want to just as photoshop...And how can I pay annually?
-
Hi can someone tell me how can I contact directly from HP for the purchase of servers.