Envy 5660: Envy 5660 its own network?

I'm trying to find out if the 5660 is its own wireless network that may interfere with the main home wireless network.  I have a HP 310 g I can print to wireless, but if I use a laptop and search for a network to connect to, the 310 does not appear (I expect not to).  5660 envy presents itself as a network that I can connect to, just like our home network and other networks in the neighborhood.  That means it is its own network?  If so, and given that nearby networks can interfere with our family network, could the 5660 cause connectivity with the home network problems?  We noticed connectivity problems since installing a new modem/router and the new printer 5660.  I've exhausted all modem/router issues, but now wonder if the 5660 printer could be a problem.  the family network was on Channel 6 and the 5660 was on Channel 6, I could see as a problem.  I've changed since the channel for the modem/router so I hope that they work at least on different channels and therefore will not interfere.

You must disable wireless directly into the printer. That does not everything what you were saying, connect you to the printer WITHOUT router. But then, you cannot connect to anything else wireless. The instructions are in the manual to disable the SSID Direct wireless we see.

Tags: HP Printers

Similar Questions

  • Print files on its own network

    The files printed off site about a month ago, file print on all her own couple days and I can't stop it.  What can I do to get the print file?  HP Photosmart wireless 5520

    Start by performing a hard reset. Unplug the power cord to the back of the printer and the wall on. Aside for 30 seconds and reconnect. If this does not help, uninstall your software and re-install.

  • HP Color LaserJet MFP M277 Pro: LaserJet MFP M277dw announces its own wireless network

    I just installed a new HP Color LaserJet M277dw MFP Pro and noticed that it creates its own network wireless with the name ' HP-Setup > LaserJet 5 c-277. Even if the WiFi is turned off.

    I don't want the printer to make her presence known on WiFi and would like to know how I can turn this 'feature '.

    What is this function? I couldn't find any information about this in the manual, nor any of the settings of the printer where the name ' HP-Setup > LaserJet 5 c-277 "appears.

    @seron

    Ok...

    Try changing the Direct wireless / activate - or combination is necessary to turn the setting and the close up with the 'off' setting / disabled.

    In other words, no matter what the setting, Direct wireless can light up.

    Leave a few seconds between the time where as you toggle the setting.

    If that does not hit on it free, toggle the setting and then turn the printer off for about 20 seconds and then turn on the printer.

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • HP Envy 5530: Printer print on its own

    When I turned on my printer it started to print web pages on its own. There has not been ' t same pages I was on and wouldn't stop until no more paper.

    I cannot get him to stop and can't print what I really want. How can I cancel printing and prevent it from printing on its own?

    Thank you

    John

    Hey @jcolanzi,

    Welcome to the Forums of HP Support!

    I understand your desire 5530 e - all - in - a printer is printing multiple pages when it turns on. I can help you with that, but I'm going to need both know the operating system of each computer that send documents to the printer, as if the printer is connected to a computer via a USB cable or if it is connected wireless network.  Once I know that I will be better able to help you.

  • Envy laptop: a mind of its own?

    I've had this computer for a month and so many times I almost throw it out the window. I can be sitting in the room of this thing and for some unknown reason it just click on the websites on its own. I have not yet needed to be near him. If this thing click on a porn site, I get seriously angry. I'm going to my old Vista machine running again, at least I felt some control over it.

    This post of @EmeraldAvenger should provide you with guidance. Please let me know if you are able to disable the touch screen.

  • Target RT Apply network settings: an its own adjustable cRIO IP address...

    Was looking for a way to port 1 IP address of a target it cRIO setting ' self - progammatically

    (1) without having to know that delivered such intellectual property

    (2) and without having to know as shipped MAC ID

    Get info target works very well with the loopback address so I undbundle the MAC ID and use it to apply settings target. What mistakes on 56.

    NI_Real-Time Libraries.lvlib:FPC Discover systems (all interfaces).vi
    
    Complete call chain:
         NI_Real-Time Libraries.lvlib:FPC Discover systems (all interfaces).vi
         NI_Real-Time Libraries.lvlib:SetTargetConfig.vi
         NI_Real-Time Libraries.lvlib:RT Apply Target Network Settings (Static).vi:1
         TargetInfoTest.vi
    

    Apply works very well when I provide the MAC ID of the target, then run it on the development computer. But I was trying to avoid having to save the MAC ID.

    I wanted to have all cRIO it's own initialization IP address - and retrieve the address of a file of gxml.

    Is this possible?

    Hello

    If you look at the second link I posted, it talking about going into the .ini file and change the IP address it. I think this method could be made of the cRIO itself; However, in general, we recommend having the cRIO put its own ip address. I guess that's why the error 'Apply network settings' VI. The cRIO having set its own IP address can be problematic if it is attached to something that the computer is unable to find. Good luck!

  • Computer notebook Synaptics trackad pointer moves on its own-Looking for solution

    I recently bought a new laptop Hp M6 - N010dx, and the trackpad Envy Touchsmart is already in place.
    I installed the latest drivers for my pc, upgrade to 8.1 windows and twisted the sensitivity of the mouse, but I always have problems.

    Sometimes the pointer will become difficult to move on the screen and then will move its own. Again, to move its own, as in, I'm not in contact with the laptop at all. It's very frustrating.
    I can temporarily fix the problem or reboot my laptop or by writ put to sleep and then wake up again. However, I am looking for a permanent solution.

    Any ideas?

    I decided to return the laptop to bestbuy. I found that many users have had this same problem with the same model laptop and no "solution" offered actually work (I even tried myself without result). It's really a shame because I liked this laptop apart from faulty equipment... I am considering getting the x 360, but he mixed comments as well.
    This may end up being my last HP laptop that really, really bothers me because they are beautiful and affordable pcs

  • How is an own network?

    I have connected my Airport Time Capsule 2 TB wireless hard & 802.11ac Base Station of the Wi - Fi for the first time it's own network and it connects it automatic. How is it that happens?

    Time Capsule airport does exactly what it's designed to do... because it's a wireless router (with a built-in hard drive)... then it will create its own wireless network signal when it is implemented for the first time.

    If you plan to use Time Machine to back up your Mac in the time Capsule, don't forget to use the signal from the wireless network that the Capsule provides... so that your Time Machine backups will be officially supported by Apple.

  • How to block a website from poping up upward on its own?

    I don't know how I got into this, but I'm on a Web site I want to visit, there is this website FREEZE.COM always name pop up on the same page I visit, I have to type BACK to display the page that I need to see, then FREEZE.COM keeps coming back as if it is to hit the BACK button on its own. Sometimes, he goes crazy as if she had to fight with me for the computer, making it me impossible to surf the internet or check your e-mail or do anything.

    Update your browser Firefox 9 first

    Make a check of malware with some scan of malware programs. You need to scan with all programs, because each program detects a different malicious program. Make sure that you update each program to get the latest version of the database prior to scanning.

    See also 'Spyware on Windows': http://kb.mozillazine.org/Popups_not_blocked and searches are redirected to another site

  • R7000 can't access admin page and IP DHCP address range changed on its own

    I noticed recently that my IP range internal from 192.168.1. * to 10.0.1 on its own. I think I got the router configured to auto update to new firmware, so I think that it updated itself and change its settings. When I try to access the admin page that nothing loads. I tried 10.0.1.1 and 192.168.1.1 and nothing comes up. I was wondering if anyone else has had this problem recently. I will be eventually provided to the factory settings and set it back up like that, but I'm hoping to exhaust my options before you go this route. Any ideas?

    I was able to determine the cause. He I warned when you say IP changes when there is a second device with DHCP. I noticed there was some new computers on my network when I watched the network file share. I use the Netgear Powerline device to do wired connections to my living room. What I think has happened is that my recently developed neighbouring apartment unit in place the internet and also uses a feature of current line. I noticed that my DNS suffix changed to a different address, which is the ISP instead of my router. I put 2 and 2 together and realized that my network was overlaps sound via the Powerline. I have never set up an encryption key on the Powerline online so it was still using the default settings and connecting to my neighbors by current carrier. When I added the encryption key, the problem disappeared and my network returned to normal. Next time I should follow the instructions when setting up new network equipment. Oops

  • LaserJet 5 PCL Overlay Macro is not 'Overlay', on its own Page impressions

    Hello!  I wrote a macro of overlay PCL.  It contains the PCL and HP-GL/2 commands to draw a shape of statement.  I tried to call the shape on a LaserJet 5 times as automatic overlay and a macro called, but whether I invoke it, filling data print on its own page, followed by a page, print out the form.  I need them to print on the same page together.

    Here's how I'm trying to run it on the command line WinXPSP3, copy the macro and data to the print server LJ5:

    copy macro.txt + filldata.txt \\ps-70ac4a\p1

    I tried to post here macro.txt and filldata.txt, but the HTML form will not let me.

    You can obtain them in ftp tatlow.com, A1234567, A1234567 password username.

    Anyone see what I'm doing wrong?  Thank you!!

    >> ... But with filling multi-page data, only the first page of data to fill overlay; the following pages have no overlap.

    >> ... (Each page in filldata.txt ends with a page break, hexagonal 0C).

    >> ... If you could please take a glance over, I put the new macro.txt and a new filldata.txt of 2 pages...

    I concatenated the two files into a single file and sent the contents of this file (using 'lpr') to the network port on my printer (alone) (LaserJet 1320n).

    Two pages are printed, both with the overlay.

    Like I can't reproduce your symptoms, I don't think that I can try realistically investigate the cause of your problem.

    {I would remove the CarriageReturn character and line break (0 x0d0a) that occur just before the escape sequence "return to PCL", because it is (strictly) should not in HP-GL/2 mode.]}

    The tool used to analyze the print file is the PRN file analysis tool in paraphernalia PCL app, available via http://www.pclparaphernalia.eu

  • Windows Vista won't allow me to open my files in its own window

    I can't get Windows Vista change to allow me to open my files in their own windows. I was not able to do this since I bought this computer a few months ago. I thought I did something wrong, but I follow the directions to the T and it continues to open only the folders in the same window.  Y at - it something I'm doing wrong? I follow the directions for help and check open in its own window and yet it acts as if I do not change it... I apply and ok and press to apply to all the files and still nothing.

    I don't know what are the instructions you followed, so here is a series of instructions on opening the windows, including how open each instance in its separate window: http://www.vistax64.com/tutorials/91587-open-folder-same-separate-new-window.html.  Read full article and follow ALL these instructions (there are parts you include in your post that are important to make it work - but then again you probably do not understand everything).

    In the meantime, to open a specific folder in a new window, you can right click on the file and click on open rather than explore.  This will open the folder in a new window.  It's an extra step, but it is a workaround until you find the answer (if the above did not answer it).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • LaserJet Pro 400 M401dne problem Duplex - duplex printing on its own from Windows computers.

    401dne's all jobs from two sided printing windows different computers even if I did not turn on "Print we Both Sides" in the properties of the printer from any application. I even check it whenever I print. A MacBook Pro with OSX 10.8 also have printing on this printer and is not Duplex no print jobs. Note This duplexing on its own comes in all applications (printing from IE, Office 2013 etc.).

    I upgraded to the latest firmware and update the latest drivers to print (complete solution install). A printer connected via network domestic (hard wired ethernet to the router) being accessible by two computers Windows and a Mac.

    How can I fix this to the o of Windows computers, I can print on the front of each page only, when I want to.

    Thank you

    Problem solved. I contacted HP Support by Chat online and we opted for the PS driver. It works correctly, a face print individual pages, Duplex prints two pages on one. So yes, the PCL6 driver is deficient.

  • Why my iMessages are showing on my camera of husband? It has its own Apple ID?

    Why my iMessages are appearing on my husband's phone? It has its own Apple ID.

    Ano also its (incoming and outgoing) calls on iPhone 6Plus S show on his iPhone 6s.

    Thank you

    Apparently, both phones have been implemented with the same iCloud account.

  • I have an IMAc running on the latest version of El Capitan. MY blutooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear.

    I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close.  This message of the 2 line took almost an hour to type as I have no control on the touchpad.

    Hello Kluggerjo,

    Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.

    I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems.  This article will guide you in this process: reset the management system (SCM) controller on your Mac.

    If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user

    If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X

    If you experience any problems or have any questions, please let us know. The entire community is here to help.
    -Best regards

Maybe you are looking for