Envy 5660: envy 5660 scanning photos

Similar Questions

• ENVY 100 scans documents and photos cultures, regardless of where they are placed.

  ENVY 100 scans of documents/photos cultures. Preview is fine, but not the final result. With the help of Mac OS 10.7.5.

  This scanner has always cropped my images or documents, even if then I see very well in the preview. Right now I'm scanning my passport. I have it lined up against the side (as it shows on the drawing on the scanner) and I see the entire image on the preview. However, when it comes to the final image, I get a version cropped my passport.

  Where can I go to fix this?

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and asA4 or None value.
  7. click OK and try to scan.

  If you get an error when trying to change shortcut scan patch installation, and then follow the steps above to the following:

  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg

  Kind regards
  Shlomi

• HP ENVY 4501 Scan to computer for Google Chome

  I use Google Chrome on an Acer Chromebook.  All downloads for Chrome is current as it is updated each time I connect.

  I installed my 4501 want to PRINT from my Chromebook and everything is priting well enough.

  I have CANNOGt SCAN TO COMPUTER since your software is ONLY AVAILABLE for Windows 8 and MAC and since the CHROMEBOOK do not use a CD, but uses the CLOUD for all is a matter of difffent.

  I have a coirse would like to BE able TO SCAN GTO WORKSTATION, but don't know where to start INSGTALLING SOFTAARE for GOOGLE CHROME, so any HELP would be APPRECIATED.

  George M Weinert V

  [email protected]

  Double post:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-envy-4501-scan-to-computer-for-Google-Chome/m-p/4761555

• Envy D411-scanning multiple pages in a single document

  After much research and questions posted and a long discussion with Technical Support on the fact that, during the analysis of the documents in PDF format, it is either the icon or add another page available on the scan icon preview page, so that if you have a multiple-page document, you have to scan and save each worksheet individually, I discovered, today, in this case you scan the document to send/PDF, voila! -There is a button to add or remove Pages.  It seems to me, the button is in the wrong place and should be moved to or added to the option of regular analysis.  It also appears as if I choose a destination, not email, to save the document of several pages scanned in a folder rather than by e-mail.  Come on, HP, let's get with it!

  Hello

  Please, try this and let me know if this is useful:

  1. Open the HP software.
  2. Click Scan Photo Document.or.
  3. Select Save as PDF and verify that you check scanning see the preview.
  4. Set the resolution to 300 dpi or below and click on the scan button.

  I guess the resolution to save as PDF option set to a higher resolution and, therefore, the more the icon does not appear.

  Hope that helps,

  Shlomi

• HP ENVY 4500: Scanned image appears in several parts of the whole.

  Hi people, for convenience, I'm going to number paragraphs describing my problem.

  1. any new product, which was to install a couple of days.

  2. the product prints and copy great and no problems. However, although yesterday I scanned a picture OK, now not so much.

  3. I hate to admit it, but I am 81 and my memory is not so great. Perhaps, I do not use the Protocol? Here are the details of the problem:

  4. when I scan using the screen of the printer the printer allows to scan that a good connection to my computer and an appropriate message is displayed on the monitor screen "Scanning". When parsing the result image is sent to the 'Documents '. So far, good.

  5. what analyzes all the I go to Documents and find the split image in ten 10 or more separate items and it would be a major task using PES or similar to the room together. In any case, would not be a solution, the photo scanning in a room, that's what I'm aiming for.

  6 but it is not the end of the problem. When I scan using the computer all scans correctly and is displayed in the preview window, which appeared on my screen. But the 'same' problem persists as above and the scanned image in appear in 10 or more parts at all.

  7. I don't think that there is nothing wrong with the product, rather I strongly suspect that I'm doing something wrong or maybe I misconfigured Setup.

  How can I fix this problem? What should I do to scan photos and documents as an image or a document and not 10?

  I'll be very grateful to help on this problem. Thank you very much. If you need more information, please just ask.

  Stehkoyeh.

  What follows is HPENVY4500 all_in_one printer, scanner, copier and fax. Professor, thank you very much for your help. However, I managed to fix my situation with the changes as follows:

  1. in the hp/scan utility on the computer. I clicked on the Scan of the computer and then the change analysis tasks...

  2. This was brought up in a popup window. I then put 'photo jpeg' highlight and click on modify.

  3. This brought another window. This is the important part. I've changed the menu presets "Photos, graphics, etc." and then that immediately under this Type 'exit' I've changed to read JPEG.

  4. everything that sounds very complex and I know I got lucky to fall on this procedure, because I'm good technically not for sure!

  However, the procedure above fixed my problem and my scans to and from the computer using Direct and wireless network were quite normal and very good. The scans are clear and bright and crisp colors. I am now very happy.

  As for the solution "self-cultivation", I'll certainly store that is far away and use it if you need. Although it was not necessary for my problem now, it's a very important protocol worth remembering.

• scanning photos on my mac to my hp photosmart C6380

  Why can't scan photos on my Mac after I installed upgrading Lion?

  Hello dzn4u

  Unfortunately the Lion uses different drivers than the previous version of Mac OS x. The following article should help you to re - install your printer and get it in working order.

  OS X 10.7 Lion: install and use the printer with Lion

• Can't scan photo

  I have Photosmart 60610 with Mac Book Pro with OSX 10.7.5.  Can scan the document to the printer computer using the control panel (.pdf porduces, but cannot scan photos?)

  I recommend scanning your Mac using Capture of Image (it is in your Applications folder).

  Open the application, choose your scanner on the left side, click Show details on the background.

• My Windows Photo Gallery has incorrect time for good that my computer is correct. I know how to change the time, but wanted the exact time is displayed automatically when you scan photos etc as before.

  Time is incorrect in Windows Photo Gallery and I would like to do this automatically scanned early for photos instead of my change time.

  Hi Sardai,

  Unfortunately, this information is not always accurate. If you took some of your pictures in a different time zone, for example, the time recorded for these pictures could be incorrect by several hours. The camera can also be set to the wrong date and time. Or, if you're scanning photos, ta date will reflect the date that they have been digitized, not the date on which they were taken. All these anomalies can be adjusted manually.

  To change the date or time

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. If you do not see the details on the side of the window pane, click information on the toolbar to display it.

  3. click on the image you want to change.

  1. to select more than one picture, hold down the CTRL and click each picture you want to change.

  4. click on the date at the top of the details pane.

  5. click on the arrow next to the date and then click the correct date on the calendar.

  6. click on the time at the top of the details pane.

  7. Select the correct time.

   

  To adjust the time for pictures taken in a different time zone

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. right click on the image you want to change and then click on change time taken.

  To select more than one picture, hold down the CTRL and click each picture you want to change, and then click a picture when you are done.

  3. in the change to box, type the number of hours to change, or click the up or down arrow to select the number of hours. To make the new start time, type a minus sign (-) before the number.

  For more information, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• C4780 all-in - one HP printer - Hung in scanning, Photo, copy state - can't print

  Somewhere, I am in a State where "Scan, Photo, copy" lit.  Recycling power does not consider out of the State. Button cancel-X and the 'Back' button are not lit.  I feel in queue to the top, jon, but cannot print until I get out of this mode.  Recycling power does not help.  I don't want to scan, Photo or copy.  How can I get out of this mode?  Help, please.

  OS: windows 7 Pro
  Printer: C4780

  Disconnect the power supply to the back of the printer and the wall.  Wait 2 minutes, plug it all back in and turn on.

• How to scan photos & slides of canon 4350d to windows vista edition Home premium

  How to scan photos & slides of canon 4350d to windows vista edition Home premium

  Hello

  Go to the link below canon and are looking for a manual to download for your model on how to use it

  http://www.USA.Canon.com/Cusa/support/consumer

• How Scan photos using the printer and save it in the Gallery of photos from the computer?

  Original title: scan photos

  How can I Scan photos to my printer and place then in my Gallery of photos in my computer?

  Hi Joseph,.

  Please let us know the make and model of the printer you have.

  The method of image digitization and its related settings differs from one printer to another. So, I suggest you consult articles guide you may have received with your printer when you bought. If you are unable to find all the details in the article of guide, it would be best to contact your Technical Support of the printer for assistance on this.

  You can publish all your queries related to Windows on Microsoft Community Forums and we will be happy to help you.

• How to scan photos from printer to PC?

  Computer home just brought a new HP and want to scan photos on my HP 6600 printer on computer.  I connected them by cable instead of using wireless.  What is the sequence to scan a picture on the screen of the printer to the computer image file?

  Manual of the printer, not the computer. The entire process is managed by the printer via the software installed on the PC.

  Here is a link to the manual, if your HP6600 is a series of OfficeJet all-in-one:
  http://h10032.www1.HP.com/CTG/manual/c03226612.PDF>

  Chapter 3 covers the functions of scanning.

  SC Tom

• How can you stopPhotoshop CC2015 access denied when you try to scan photos?

  How to stop Photoshop CC2015 of access denied when you try to scan photos? I had to resort to the application of the C6. Was able to use the CC2015 until tonight.

  Have you tried restarting your scanner and restarting your PC?

• How to re - assemble two halves of a large scanned photo to create the original image in CS3

  How to re - assemble two halves of a large scanned photo to create the original image in CS3

  Here's a nice video that might help you assemble your photos!

• PES 11, divide scanned Photos is not active

  I scanned a number of photos and when I went in editor > images and divide scanned photos was not an active choice.  It's on the menu, but I couldn't select it.  I scanned a few times to register defining images at an angle just to be sure, it could be detected.  He used to work in PSE 9

  I use a HP office jet Pro 8600 premium.

  OS is windows 7

  You are in expert mode? Many of these detailed features is only available in Expert Mode. Please click on "Expert" tab and see if the menu option is enabled. "

  Thank you

  Catherine