ENVY 700-515xt: RAID 1 support WANT 700-515xt Office

Similar Questions

• HP Envy 700-414: HP Envy 700-414 Office windows 7 64 drivers

  I didn't like Windows 8.1, because of crashes and recoveries almost every day. So I contacted HP, does not and according to the frustration, I erased the hard drive, disk recovery and all partitions and installed Windows 7 ultimate 64 not knowing not only desktop 700-414 HP Envy Legacy CMOS and HP support don't like no change of. Also, the biggest problem is supported for the HP Envy 700-414 Office windows 7 64 drivers are extremely hard to find, especially drivers LAN Modem, if they exist in HP supports. What can I do?

  Hello:

  This model has the same motherboard as you and has a complete set of W7 x 64 drivers.

  Do not use the BIOS or the files of the firmware of this model on your.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-700-200-desktop-PC-series/5399651/model/6529898

• HP ENVY 700-074: Office extended

  I'm under Win 8.1 with a wide LCD of HP w2207 monitor as monitor and a HP 2310 series wide LCD monitor like the digital display.  When I log on once the computer has been asleep for a while, the Monitor flashes on then goes off hiding all windows that had been opened on this side.  To regain the Office extended, I can either cycle the power switch on the monitor or invert the screen with digital display, then knock down them again.  Sometimes, if I'm fast enough, I can keep the living monitor by clicking in a window on the screen.  It still does not work.    There is no problem with the extended during normal working desktop.  This problem only occurs when connecting.

  Hi again jbpatt,

  Thanks for the quick response!

  Since you mentioned that this problem occurred after the upgrade to Windows 8.1, I recommend you return your system to the previous restore point to before installing the Windows 8.1 update. This can be done by following the steps described in this document on using Microsoft System Restore (Windows 8). Once restored, I also suggest you to install some other Windows 8 updates for your computer. As soon as updates are made, then I recommend reinstalling the Windows 8.1 update.

  As monitors cyclical food turned out to work when you connect to your computer, I recommend following the steps below to make sure your monitors work correctly:

  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet (not a power bar or surge protector)
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select
  Step 6. Try a different cable to connect your monitor to your computer

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Window 8 HP Envy 700 error on monitor

  Hello

  I am a newbie to forums so hope I'm doing this correctly.  I received a HP Envy 700-074 office with Windows 8 for a Christmas gift.  I took my old computer xp shop pc to transfer data and everything was fine until this morning.  I received the following message appears on the display: scanning and no VGA or DVI signal found then goes to "sleep".

  Help, please.  I'm so frustrated right now.   Husband and I are retired now.  He tried to reset factory settings monitor has pulled the plug of monitor power and held the power button

  for 60 seconds and back plugged in to the bottom.

  Yesterday, I remember turning off... .unchecking "Restart automatically" because of the guarded pc restart all since I got this new pc.

  Thanking you in advance for your help.

  Kathy

  Hi Kathy,

  Can you please check the following;

  (1) make sure that the computer is connected to the display with a VGA, DVI or HDMI cable...

  (2) make sure that the monitor and computer are powered...

  (3) make sure that the monitor and the computer has been turned on... you should have a light on both.

  Any number of things may happen and I want to be sure the computer is not stop or go to sleep. If please report back with your findings and let us know if the problem is solved or not.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Envy 700-414: blocking Vosteran

  I have two HP Envy 700-414 offices and a laptop HP dv6 - 6173cl with Actiontec Wireless N DSL Modem configured for a wireless home network. All three computers are Windows 8.1 (64-bit)

  Recently, I managed to remove two of the Vosteran computers.

  Is there a way of blocking Vosteran from entering the network.

  Thanks Jessie.

  Jessie711 wrote:
  

  Thanks for the reply old_geekster, I removed the Vosteran of my computers.

  My question was, is there a way of blocking Vosteran so I don't get reinfected.

  Thanks Jessie.

  Install a renowned ESET, McAfee or Norton internet protection suite.

• Want to 700-410 W/Beats Audio: HP Envy 700-410 i5 W/Beats Audio, need drivers for Win 7 NO HP SUPPORT

  So just a week after the arrival of my new desktop PC (earlier this year), I had a massive failure of hardrive. I have access in a similar to several corporations hardware industry and had several including a beautiful 248 G SSD kingston hardrives onsite. Having said that I do not think there sucj a problem just install the new SSD in read to send the unit back to HP for repair. I needed this system running and had no time to wait than the lead time of him having returned repaired, about 7-10 days. Yes, it was a huge mistake that has made this system essentially unusable. I did not like the unit running windows 8.1 because it was not a touch screen. I got a new Windows 7 Pro, which I installed it and he posted fine and oots upwards in seconds. No audio beats, but it's not really my thing, no biggie. I can not find information on obtaining network, adapters, Lan, Wan drivers and basically can not access my services Adobe CC, which is my main fucntion. I have since bought a Dell and never have a problem with sys op separate etc.. I return to the problem of tis after several monts and decided I will ive it oe more attempt and them I think Im going to test the aerodynamic viability of this office. I am sure that it will fly ut Im not confident on its ability to land without damage! Please help if you can.

  Hello:

  See if the W7 x 64 drivers of this model works on your.  It has the same motherboard.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-envy-700-200-desktop-PC-series/5399651/model/6529898

  Do not use the BIOS or the files of the firmware of this model on your.

• Want to 700-329: how to switch from windows 8.1 for al profession windows 7 on Envy 700-329

  I'm fed up with the problems resulting from Windows 8.1, for example the program incompatibility, Slow / no response in browsers, particularly IE 11, forced to use touchscreen interface style on conventional monitor and so on and so forth. I have a license of Windows 7 Professional 64 bit for my Dell Vostro laptop. Can I use it on my HP Envy Office 700-329 to replace Windows 8.1?

  Hello:

  It is forbidden to transfer the license OEM of Windows or using product key OEM the Dell laptop on HP desktop computer.

  Please read the FAQ below... specifically...

  Q. my client bought a new PC and wants to move the OEM software from the old PC to the new. Users cannot do what they want with their software?

  A. no, the OEM software is licensed with the computer on which it was originally installed and system is linked to the original machine. OEM licenses are licenses for single use which cannot be installed on more than one computer system, even if the original machine is no longer in use. The 3668Microsoft Software License Terms, that the end user must accept before using the software, say that the license may not be shared, transferred or used concurrently on different computers. System integrators must provide support to the end user for the Windows license on build computers, they cannot support licenses on computers that they did not build. It is a fundamental reason why an OEM System Builder license cannot be transferred.

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx#fBid=Q44RMvZYHTG

  If you want to buy a license support and installation of W7, you can use the W7 x 74 drivers and the software of this model on your own, except the BIOS and firmware files.

  http://support.HP.com/us-en/product/HP-envy-700-desktop-PC-series/6886619/model/6988376/product-info

• HP Envy 700-249: upgrade graphics from GT635 to GTX960... I was wondering if computer supports

  Hello

  I am looking to update my graphics card between a GeForce GT 635 a 960 GeForce GTX amp.

  I was wondering if my computer would be able to support it, and if the card would fit well inside?

  My computer specs:

  HP Envy 700-249

  Intel Core i7-4770

  CPU @ 3.40 GHz

  12 GB of Ram

  Power: 460 W

  Thank you

  Mitchell

  Greetings,

  Your PC BIOS will support the map.

  You need a 6 connection pins on the map.

  The card is a double slot and 9.5 inches in length. Check your turn measures and make sure that you can install a card double slot.

  The food is fine, as long as you have a connection to pine trees six or eight available.

  NVIDIA provides an adapter.

  Disable secure boot. Enable legacy start.

  See you soon!

• want to 700-215: Add drive hard 4th envy 700-215

  You want to add a disk hard 4th envy 700-215.  There are only 4 connections on the motherboard sata, one is used by the dvd and then the other o\are 3 used by the hds.

  Is there a method to add another connection sata for the 4th disc, or is the choice between a 4th disc or a dvd?

  Sure.

  You can add a PCIe x 1 SATA controller card to your PC. Which will increase the number of available ports.

  See the research I've done shows availability and prices. You should do a search the same locally for prices in your region of the world.

  https://www.Google.nl/webhp?SourceID=chrome-instant & ion = 1 & ESPV = 2 & ie = UTF - 8 #q = PCIe 20 x 1% 20sata % 203% 20controller %

• HP ENVY 700-230qe: HP700-230qe supports two monitors?

  I connected two monitors with ENVY 700-230qe, a single monitor works with the computer, the other, cannot be detected by the computer. 700-230qe ENVY can supports two monitors?

  Thank you.

  I looked at the SPEC PAGE where it says:

  DVI - D and DVI - I power ports (ports can be used simultaneously)

  So it would seem he could support two monitors.  Maybe you just need help.  See TSA PAGE for a statement.

• Want to 700-329: HP Envy 700-329 accepts no no Windows Pro 8.1!

  Hello

  I recently bought a HP Envy 700-329 for our society. It came pre-installed with Windows 8.1 Basiles Premium.

  I had to format and put Windows Pro 8.1 on it, so we could join our field.

  However, what continues to be, is whenever I have install Professional 8.1, it seems that it is only 8.1 Premium Basiles once again!

  The first time this happened, I talked to the person that I bought the computer and 8.1 Professional form and he replaced the 8.1 Professional Windows with another copy.

  However, who has not solved the problem.

  Is there something that HP is doing so, we cannot spend operating systems?

  Please let me know. I really need this working!

  At any time.

  I am pleased to have been of assistance.

  It's bad enough that you can't go directly to the source and get a response.

  You will have just to use the product key from the disc you bought and 'unlock' W8.1 Pro.

  As I wrote yesterday, I have looked everywhere for work around the problem and came away empty-handed.

  You're not the only person who posted this question on this forum.  No one I know could clean install W8 or W8.1 Pro on a PC that came with the W8 standard or W8.1.

  The standard key fills the installation and errors with an invalid product key.

  You used to be able to change the product key here when you've got an error like that in XP, Vista and W7, but with this new 3.0 activation, this option is no longer present.

• Get a new graphics card for the HP Envy 700-214

  Hello

  So I tried to get a new graphics card for my HP Envy 700-214, but I'm not aware if this map is compatible or if it would have a negative impact on my system.

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-750-TI/specifications

  I don't want my system to be harmed in any way.  Here is the link to the computer.

  http://support.HP.com/us-en/document/c04100558

  Thank you!

  Wolfking98, welcome to the forum.

  Here is the video card manufactured by EVGA.  It shouldn't harm your system somehow.  However, if you have trouble with the installation, you can contact their Technical Support (1-888-880-3842) or online.  They were very useful for me.  Read the reviews to see what users have to say about it.  As you can see, there are a lot of comments and appreciation 5 eggs.  You can't do better.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Envy 700 215Xt: request info for BIOS described below

  I hope I'm posting in the appropriate section, basically a beginner in this room. I have a desktop HP Envy 215XT 700 with Windows 7 Pro 64 Bit OS. My interest is in the BIOS, and basically, I want to understand better. What I would like is to have a manual or guide for this BIOS, if there is such a thing. For example, if you have more than one drive installed, or even the DVD drive and HDD, other places to start from, if bring you up the BIOS screen, then select F10, you can select a boot device. You can also do this in F9. I have to do one, two or what? And in what order. I'm starting to think that this computer does NOT like the 2 discs hard bootable installed, period. A bootable, one works better,

  2AF7 system board / Cfg, ID 1.00 product / Bios Rev MEM v80.16 / CPU Intel core 17-4771 3.50 GHz cpu.

  1 can or I would be able to run (2) 1 terabyte drives in the computer, and can both be bootable or just one?

  2. does anyone know if there is a BIOS update or a newer firmware to do this, my opinion is not.

  3. I have here available, a person, a sort of User Guide with details of Setup when using this BIOS to go n informed approach?

  Thank you.

  John

  [email protected]

  Hello jpw389 ;
  
  Let me welcome you on the HP forums!
  
  I read your post on the BIOS info and wanted to help.
  
  You can have any number of disks bootable on a PC, but the BIOS has a defined order in which he sees these readers, and it will attempt to boot an OS in that order.  So, with more than one bootable disc to begin the second drive, you must do one of the following:

  (1) change the order of the drives in the list of the BIOS to move the other drive to the top of the list

  2) press the function key that allows you to select a drive to boot from

  The difference in the use of these two is that the first change is permanent, the second for a boot.

  Regarding versions of BIOS, the link is on the Page of the product HP to Win7 for your PC: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-700-Desktop-PC-series/5399651/model/6667346

  Under the BIOS section, you will see two updates to the BIOS.  You can check yours to see what version of BIOS uses at present.  There is no other update BIOS.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP ENVY 700-214: map new graphics for HP ENVY 700-214

  OK, so I have a HP ENVY 700-214 (plug here: http://support.hp.com/us-en/document/c04100558 ) and I'd like to get a new graphics card that is compatible with my setup. Everything is wxactly the way I bought it. I want a graphics card that will be easy to install, but also the best in the price range of 200 to 350 dollars. Ive been looking around, but don't can't find anything that tells me what I want to know. Thank you for your time, any input would be apreciated.

  @DudeSame, welcome to the forum.

  This is a great little video card that will fit easily in your case and give you good performance.  However, you need to check to see if power supply (PSU) in the computer unit has a connector 6 extra pins.  Most maps in the price range you want to require at least a connector, 6 or 8 pins or both.  At present, it is out of stock.  You may be able to find an another etailer.  Read the reviews to see what users have to say about it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP envy 700-414: HP Envy 700-414 Windows 7 driver network controller says I don't meet the minimum requirements

  I recently installed Windows 7 on my hp envy 700-414 and missing a lot of pilots. A user by the name of banhiem gave me a link to download the drivers of a 700-230 hp envy. After I did it, I clicked on another link, it gave me to install the Realtek network controller. Whenever I tried to install the driver, it would tell me that I did not meet the requirements. Other drivers work fine now, except the network controller. The steps on how to fix this error would be greatly appreciated.

  Hello:

  See if this card wireless driver works...

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated in the supported models that run an operating system supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70888.exe