Envy 7640: Envy 7640 out automatic tray extension

Similar Questions

• HP envy 4520: extension of the HP Envy 4520 jammed paper tray

  Extension of the tray jammed paper closed on envy hp 4520, can not print, help!

  Hi @chics,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you use a printer all-in-One HP ENVY 4520 with a 10 Windows PC and the printer paper tray Extender is stuck in the closed position. I would like to help with that.

  First perform a reset of the power on the printer.

  

  Then try to make a copy using the control panel of the printer to see if the tray Extender will extend.

  Please let me know if that solves the problem, or if you need assistance.

• Nine (3 days out of the Box) HP Envy 700-230qe automatically restarts after the initial boot...

  I have now a whole new desktop 700-230qe HP Envy (after about a month in the loop of the HP Technical Support).  But again, I have problems.  I took late delivery December 23, 2013.  After giving him enough time to become the temperature of the room, I opened the box and replaced my old HP Pavilion h8 - 1210t with envy again desktop computer.

  Took my time and made sure that everything is properly connected - then pushed the power button.  Everything seemed to work perfectly - until what the brand 20 minutes - when the system powered off and rebooted itself.  But for the rest of the session, everything went well - no problem.  It was Monday night.

  On Tuesday morning (December 24, 2013 - on Christmas Eve), I pushed the power button once again and the system started fine.  But 20 minutes later, it turned off and rebooted itself.  But for the rest of the day everything went well - even if I had to make several reboots all reinstall my applications and migrate my data.  I started to wonder if I still had problems.

  Christmas day (December 25, 2013) is the same thing.

  And once again on Thursday (December 26, 2013) - I finally called HP Technical Support.  I spoke with a gentleman (Terrence) - he accessed remotely my system which makes me nervous (but these guys of Nova Scotia are very good and are savvy customers.  He looked around - ran MalWareBytes and CCleaner - and said that he saw nothing thaat would be a problem.  We agreed to wait a day and see what would happen.

  Rolled Friday autour and you'd know it's the same thing.  Then, I called HP Tech Support and spoke to a lady (Norma) who, after having read the file of description of situation and asking me my name, phone number, email address (which they ask you every time you call - you would think they write this stuff and keep it on file), she immediately decided that the best thing to do is to 'Recreate the IMAGE' on my drive - to which I replied 'NO WAY '.  This seems to be the standard response, if they can't fgure out - recreate the image on your disk.  They don't seem to care about all the work you put into the construction of our system with applications with associated and all data - they want to just Blow-It-Away.

  It made me so angry that I have immeddiately contacted my case manager company HP with the history.  These people - business - case do an excellent job, at least the one I did a great job.  And I know she'll get to the bottom of this situation and go to a happy camper.

  Anyway, if anyone has the same problems with their machine - I'd be interested.

  Kind regards

  Garth

  <>>>>

  I did not read all the answers, but what my qestion... Why are you screwing around? HP has a 21-day return policy, so you can ask them to replace it with the same model or another model as they will send you a FEdEx shipping for a full refund or Exchange label. I wouldn't waste my time with a question like this on a new computer.

• HP Envy will not automatically sleep

  My computer will sleep very well if I have to say, but he will not do it automatically. This function is essential to the security of my computer.

  I confirm that I said to sleep after a minute, whether on battery or plugged in. If I said to darken the screen after a minute, which works very well, but he won't sleep.

  Here are the diagnostic report of power efficiency (deleted Forum HTML) - Note the errors.

  I unplugged all USB devices. I stopped the network sharing Service WIndows Media. I disconnected from the network (airplane mode). He shall not sleep.

  Please tell me what else to try.

  Thank you.

  Power efficiency Diagnostics report computer name HP_ENVY time of scanning 2014-05-16 T 02: 26:12Z Scan duration 60 seconds system manufacturer Hewlett-Packard product system name HP ENVY TS 17 Notebook PC BIOS Date 03/05/2014 BIOS Version OS F.53 Build 9600 platform role PlatformRoleMobile connected real mistakes of analytical results of process County 103 Thread Count 1174 report GUID {85eba029-391e-4c52-b630-5313c8f32a3c}

  Hi, AQB,

  Yes, I solved it. Here are my notes on the issue:

  Check out this web site:

  http://mingersoft.com/blog/2011/12/Why-wont-Windows-automatically-sleep/

  Best:

  http://helpdeskgeek.com/Windows-8/fix-Windows-8-1-will-sleep/

  At the command prompt:

  powercfg - requestsoverride driver \filesystem\srvnet system

  or

  powercfg /requestsoverride srvnet system driver

  or

  powercfg with fluo compact /output c:\temp\requests.htm

  Check out this web site:

  http://mingersoft.com/blog/2011/12/Why-wont-Windows-automatically-sleep/

  Best:

  http://helpdeskgeek.com/Windows-8/fix-Windows-8-1-will-sleep/

• HP Envy 5540: HP Envy 5540 out of paper message

  I bought a printer ew Frys Electronics n.  I don't have to open the box and tries to use it for about a month.  It would not print from the computer, rather a post that it was paper.  I followed all the online and packaged suggestions for resolving the issue.  Frys has refused to accept it because it had been the date of return.  HP is impossible to reach a human being, and none of his 'support' does not work.  Don't send article to Frys and throw it through a window, what can I do to get this working of the machine?

  I was finally able to contact customer support and they solved the mystery. The CD that came with my printer does not include Windows 10. The person who has solved the problem took control of my computer, completely removed the old programmes, reloaded suitable driver and confirmed that everything was fine. Hats off to HP customer care!

• Automatic download extensions do not work

  I use the extension "Download 2.5.8 ranking" somewhat, specifically to download images, but since I updated Firefox to version 23.0 this extension no longer works. When I right-click on an image that I want to automatically record, then select "Save Image under", nothing happens. In the previous version of Firefox, it worked without any problem, I want to select Save Image as and download sort would automatically download the image in the specific folder.
  I know that this extension is quite old and has not been updated, but it doesn't seem to work with the new extension called Automatic Save Folder 1.0.4 as

  Any suggestions, help?
  Thank you

  I made a fix for IT... the download link is displayed in the comments on the page Add on...

• The printer Officejet Pro Premium N911n 8600 performs the selection automatic tray?

  I have a printer Officejet Pro N911n, CN577A Pemium 8600 to two trays. My operating system is Win8, 64-bit, there is no error message, no change in System.

  The HP Officejet Pro 8600 e - all-in-One series User Guide indicates that by default, support for prints of printer from the Tray1 Tray1.If is empty, the printer draws media from the bac2 (if it is installed and loaded with media. I have tray lock disabled, Tay1 default tray and automatic selection of the active status bar. Before these selections, I contacted HP email support to report this option did not work. I received a response that there is no method that automatically selects a tray when a drawer is empty. Manual States the user otherwise... This option may not work, but it is part of this series of printers. I have the two charged plates and I will determine if it works after that Tray 1 is empty. Does anyone have one of these printers and auto function set work? Thank you.

  Hello wardell1,

  Please take a look at this document and I would like to know if the troubleshooting steps to help you solve your problem.

  Good luck!

• printer problem - with is not the automatic tray settings

  original title: printer problem

  I have a HP printer, printing of MYOB via terminal server on a Server 2003-based computer. Previously, I had the printer installed under different names, i.e. statement, invoice & delivery notes. Each instance corresponded to a different tray for printing. I have now lost the ability to use separate trays. Whenever I feel it comes back to "auto-select" I have three shared printers on the Server Desktop XP pro SP3 & can be printed on one or the other. Just can't hold the tray settings more. Can anyone suggest a solution?

  Hello

  Because the question you posted is related to windows server 2003, I suggest you post this question in the Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

• Unable to print automatically trays (LJ600)

  Hello

  I thought that I know a little how to configure HP LJ printers (we used HP LJ4000 for LJ600).

  I have problem with printers 1 M601 600 LJ. I have install without problem 10 new printers and I have problem with the last of them. Whenever the user is trying to print from her that he must go and manually specify which tray it wants.

  I assign trays to print the specific work of the designated tray/location, but the user must manually select which tray.

  I compared with the previous printers and I see no difference... (this fatal printer was not used for maybe 6 months and now I'm trying to make it work).

  What I did:

  Installed the new firmware, after the first attempt I'm resetting factory and tried the installer to start.

  I have 3 trays (2nd and 3rd they are plugged on the bottom?).

  Even if I tried to print test page on that I have to press the button what tray.
  I use the print server... when I select printing I see flashing light orange. I don't know what you need to know to help me. If you need more let me know.  Any suggestions? What Miss me?

  Thank you

  VJaw

  There is the problem. Tray 2 is set to "Plain" and the user requests "Light". When you print, go to preferences and change the type of paper in plain instead of light.

• the user is logged out automatically - timeout?

  Hello

  It is quite difficult to describe my problem... Well, we have an application with direct payment, but no custom window. Means, when the user opens the application, he sees an empty library, when he signs, he sees folios there right to. When he signed, he sees only the folios he is already downloaded, the other those diappear. Very simple. Works perfectly on my device.

  Now I'm getting reports of several users on the following behavior:

  1. the user connects to the library

  2. 3 folios appear to which they have access

  3. the user downloads 1 of folios (good)

  then

  4. the user closes the application (with double click on the home button and close the application window in "task manager")

  5 when it opens again the application, it is automatically disconnected, but see again all 3 folios - even those it has never downloaded before!

  6 when it tries to download one of these folios, the accidents of the application - which is quite logical, cause it there no right to download the folio.

  My questions are:

  1.

  Why the user get disconnected automatically when the application is closed? (doesn't happen on my device, I stay permanently connected)

  2.

  Why the library always displays all folios, even if the user is offline?

  Note: If the user logs on "manually" in the library (upper-left button), folios disappear properly.

  I was unable to "reproduce" this error on my device, but it seems to happen to several users.

  Can you help me?

  Best

  Ninetta

  I asked around, and it is likely that the call to RenewAuthToken does not work correctly. It is called when the user opens the application. A response not valid will be to disconnect the user.

• How to fill out automatically the multipage

  I have a form carbonless 3 pages I want to convert a 3-page pdf file. Three copies are) 1 white, 2) yellow and pink) 3.

  I know how to scan, but what I really want to do is fill the pages 2 and 3 with the data from page 1. I have enter on page 1, it will automatically appear on pp 2-3. Is this possible?

  Thank you!

  Just make identical domain names on each page and the values will automatically be the same for each.

• cannot connect to laptop - boots to the desktop, then log out automatically

  Original title: laptop, connect to the computer

  My laptop will go to the sign in screen, but when I connect it shows my desktop but then said disconnection and goes back to the login screen.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        You are able to boot into safe mode without any problem?

  Method 1:

  Step 1:

  I suggest to start in safe mode and check if the problem is resolved. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Check if the problem persists. If the problem does not persist then, it might be that some startup item causes this problem. I suggest you perform a clean boot and check.

  Step 2:

  To perform a clean boot follow the steps mentioned in the link given below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stop the pop-out automatic pallet tool?

  Hello

  When I click on any tool on the left options the retractable mower landed direct.

  Previously, you had to click and hold on the small arrow at the bottom to right for retractable mower which.

  Is it possible to arrest him for retractable auto clicking only?

  (PS CS6 under OS X 10.8.4)

  Thank you

  This is a problem with your input device settings and display, not by function is a PS or something...

  Mylenium

• HP Office Jet J6480: high load or work around the Board in an HP Officejet J6480

  My HP Officejet j6480 isn't all recognize the high bypass tray of the page. I would like to know how to do so that he can feed on this top. So are there specific instructions to put a sheet of labels badge or business card labels in this sandbox?

  I tried to load sheets of labels into the tray of ordinary inside and crunched printer just to the top of the label.

  Hello @klsurmi,

  Welcome to the Forums of HP Support!

  I understand that you are having problems loading labels in HP Officejet J6480 all-in-one printer. I would like to help you today with this problem to feed paper. On this particular model of printer paper for printing a single sandbox there. It is the main tray at the bottom of the printer. The 'top' I believe you are talking is only used for faxing, copying or scanning automatic document feeder. Below, I will give instructions for properly loading paper in the tray of your product. Once you have confirmed that your labels are properly loaded we will test print in order to confirm if the problem is resolved.

  Step 1: Load the paper:

  1. lift the output tray.

  

  2. Insert the paper with the side to be printed down along the right side of the status bar. Make sure the stack of paper is aligned with the right and rear of the tray edges, and the height does not exceed the line marking in the status bar.

  

  3. slide the paper in the tray to fit the paper size you have loaded.

  

  4. lower the output tray and pull out the tray extension.

  

  -Source

  • For the labels, you can load up to 100 sheets of labels in the paper tray at the same time.

  Once the labels have been loaded properly, please print a test to confirm if the paper feed problem has been resolved. If the problem persists please let me know that the size and weight of the paper label is that you use.

  Please reply to this message with the result of your troubleshooting. Good luck!

• How to print envelopes on the HP OfificeJet Pro 8600,

  Hi people there;

  Recently I came across many people ask how to print envelopes in the printer even the HP Officejet 8600

  Do about it that I decided to provide the two statements in this document as well as the links in the article where I want to talk about the information. That way people who want whether fast and accurate to achieve by reading and following this article and all folk wanting to maybe dig section will provide more in depth information

  This is how load envelopes;

  
  

  I'll give you the link of the Article where this information was collected

  
  

  http://support.HP.com/us-en/document/c02890475

  Here the steps to load envelopes on the Officejet pro 8600.

  
  

  1. Grasp the handle at the front of the tray and then pull the tray toward you to open it.

  2. Figure 12: Pull the feeder

  3. Slide the width guides to the paper as much as possible.

  4. NOTE: If you load a larger size paper, pull out the extension of the tray to extend the status bar.

  5. Figure 13: The input tray Extension

  6. Insert envelopes in the center of the tray with the flap of the envelope on the left and upwards. If the valve is on the short end of the envelope, insert the envelope in the center of the tray with the flap towards the product and upwards.

  7. Figure 14: Envelopes of load

  8. Slide the paper width guides are against the edges of the envelope. Make sure the envelope is centered in the status bar.

  9. Push the tray into the product until it snaps.

  10. Figure 15: Push in the tray

  11. Remove the extension on the output tray the tray.

  12. Figure 16: Take out the tray extension

  It's the explanation on how to load envelopes into the 8600. Hope is useful

  Now check that the use of envelopes are supported by the printer,

  This article will provide you also with the support of the envelopes by this printers;

  http://support.HP.com/us-en/document/c02858465

  Is an important to properly load envelopes for use only envelopes supported by the printer.

  you could spend countless hours trying to figure what the problem is without realizing that the issue is the envelope that you use actually is not supported.

  
  

  Here is a list of envelopes supported by the Officejet 8600

  
  

  I hope it's to your taste.

  RobertoR

  ▼