ENVY Desktop - 750-137c: help me to find a graphics card that fits.

Similar Questions

• MSI GeForce GTX 750 Ti game HDMI 2 GB OC graphics card won't work with my HP Pavilion a6713sc?

  Hello

  I m intend to update my video card - (ATI Radeon HD 4670) and would like to know if my PC HP Pavilion a6713sc is to old for the MSI card above.

  HAKAGU

  Hello @Hakagu,

  I understand that you plan to install the MSI GeForce GTX 750 Ti in your HP Pavilion a6713sc desktop PC. Unfortunately, your computer does not support this graphics card. I recommend that seek you for a graphics card that supports PCIe x 16 GEN 2.0 and no higher than your motherboard has PCIe x 16 GEN 1.0 slots and GEN 3.0 are not compatible.

  I hope this helps. Thanks for posting on the HP Forums. Have a great day!

• Find a graphics card for an old Dell driver

  I just installed Windows 7 Ultimate x 86 on my PC Dell OptiPlex GX260. I am using a Dell M782p model monitor. Only, I needed to install the drivers for the sound card, network card and display adapter. However, I had been using the display driver does not support Windows beyond XP installations. I have exhausted all my resources search and have been unable to find a graphics card driver to meet all my needs (Windows 7 and 32 - bit support). Someone, please help me to change my screen resolution!

  

  I FIXED IT!

  Run the XP version of the driver in compatibility mode, and don't forget to choose to restart later. Then in the compatibility window, click Next and save the settings for the installation program driver as if it had functioned properly. Finally, restart your computer. Voila!

  : D

• HP ENVY on the dv6 hdmi port connect to the graphics card or onboard video?

  HP ENVY on the dv6 hdmi port connect to the graphics card or onboard video?

  Thank you!

  Hello:

  It is part of the audio HDMI graphics cards.

  Normally the Intel HD graphics card manages audio HDMI - even on Intel processors with AMD switchable graphics card models.

• HP ENVY Desktop - 750-167c: HP recovery media creation

  I recently bought a HP Envy desktop computer and I tried to create a recovery media and I get a message saying that the partition does not exist. The machine is Factory reconditioned.
  
  What are my options to move forward. I'm guessing that the mahcine should have this partition when it was "reconditioned."

  Thank you.

  #HPExpertDay

  I suggest you call HP support that could take a command remotely on your computer to see what goes wrong, and then if necessary, they might send you a series of recovery Image factory (depending on the situation).

• Need help to see if the graphics card is compatible / finding new food please

  Hi, I use currently a HP ENVY Office 700-214 I bought a few months ago and recently decided to update the graphics card so I can continue to play with the higher settings.

  I found a 'Nvidia geforce 760' graphics card which I think should be an upgrade of what I use now, but alas, I have to improve my diet in order to use it because it requires a minimum of 500W. So I was wondering if someone could help me with a few questions.

  1: the Nvidia geforce 760 map is compatible with my computer?

  2: could I possibly get links to a few feeds compatible with my computer? (If posible may 1 with a bit more 'W', then I need minimum.) So if I update in the future more I'm already covered?

  Thanks for the help, I appreciate it

  Hello

  Boot in the BIOS (F10) and verify the information in system information. What is the level of BIOS version? If your PC is using version 8 or 80 and above all the NVIDIA 760 should work unless the version of the video in the video card bios expects something different.  In this case, check with the manufacturer of the video card for repair.

  The CX600 Corsair or CX600M will give you enough power head room.

• Pavilion p6 - 2220t Desktop can't see Gygabyte GV - N210D3 - 1GI graphics card

  I added a graphics card from Gigabyte GE Force 210 GV-N210D3 - 1GI to my desktop HP Pavilion W7 p6 - 2220t. Reason: p6 - 2220t came with DVI (without Audio), and I need full HDMI.  The card went to the fine and certainly relies on the motherboard. But when I try to install the drivers Gigabyte I get error: NVIDIA INSDTALLER can NOT CONTINUE. THIS GRAPHIS DRIVER COULD NOT FIND THE CHART COMPATIBLE MATERIAL.  So ....... Can I HAVE to DISABLE INTEGRATED GRAPHICS card for the new card to work?  If so, HOW can I DISABLE the INTEGRATED GRAPHICS card?

  Any other suggestions to make to a desktop Pavilion p6 - 2220t to see a map of graph Gygabyte

  Hello

  Really, you should consider buying this MSI NVIDIA GTX 750 for $120 after rebate.  He will be head and shoulders most of the cards for the money.

• Help! I disabled my graphics card intel on my y510p

  I feel pretty stupid. My Nvidia Control Panel does not work, so I looked for a solution online. Someone said to turn off the graphics card intel (so the system would default to the 750 m from Nvidia). I tried this and my computer was very weird. The functions of the menu (windows 8) start very well, but nothing works to the level of office. I can move my mouse and click on the icons and menus on the taskbar at the bottom of the screen, but no programs will open. I tried to navigate on my control panel through the start menu and still nothing happens. Can I do to solve this problem? Can I re-enable the onboard graphics via safe mode or something?

  Naturally, it did not fix the Nvidia Control Panel either...

  Thanks to you two, I restored my laptop and the problem is solved. It took me awhile to find the Novo key but, I didn't know yet that it's there!

  Thanks again!

• HP ENVY Phoenix 860-008na: removal of the bracket for graphics card?

  system specifications are,

  Intel Core i7 6700 Skylake @3. 4 Ghz to 4 Ghz

  16 GB DDR4 RAM

  2 TB HDD & 128 GB SSD storage

  GTX980Ti 6 GB GDDR5 NVIDIA

  Windows 10

  just wondering if its ok to remove the mounting bracket that is attached to the graphics card to get the best air circulation

  is it right in place for shipping?

  Thank you

  Hi there @junior19805,

  Welcome to the Forums of HP Support!  I understand that you ask a withdrawal of the graphics card of mounting brackets for better circulation of air.  I'm happy to help you with this.

  There are a few problems with this. First support firmly maintains the card in place in its decision to maintain a good connection and prevent the flow of the socket. Second, although it may seem intuitive abduction, counter to the back plate of the computer can actually hinder the cooling system, as the positioning of various fans and admission of eaves, are often designed to channel air flow, so it travels on the components that most need cooling.

  All that being said, you can always try it and see if there is an improvement in your case, but the possibility of a graphic intermittent connection is going to be a matter of concern

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite A200 - cannot find the graphics card just for Win XP driver

  Hi guys,.

  This is my 1st time here:
  A little confused on this, can someone help please:

  I have a Toshiba A200 XP Pro SP3 &.
  Rebuilding, & having bad identify & location fix the Radeon graphics card.

  Display-> settings properties shows that ONE monitor & should show 2 monitors - where all THE graphics are not displayed as it should - any ideas how to fix this please?

  Can you please post the complete laptop model name and model number?

• Update graphics card that went wrong; Need help.

  Let me first, I the a6700f desktop model.

  Here's my problem... There is a month that I bought a graphics card for my computer, the NVIDIA GeForce 8400GS 512 MB DDR2 PCI Express graphics card, link below:

  http://www.BestBuy.com/site/olspage.jsp?skuId=8990407&type=product&ID=1218007083381

  . It was great to work on my computer, and I liked the fact that I can play higher quality video and games on my computer, which could barely handle with the 6150 it comes with. It worked fine for about 2 days, when my friend told me that he had the 8600 model given to him by his cousin, but because it was a PCI Express model, it has failed on its motherboard. So he let me try, because it was the card I have established originally to get (but the Best Buy had not).

  I pulled the 8400 which worked very well and replaced it with the 8600. When I turned on the computer later, the monitor never displays anything. I could hear the music start and everything, so I know that it was running; However, the monitor shows nothing. So I turned off has released the 8600 and then tried the 8400. Even if it was working fine before trying the 8600, the monitor wouldn't read something with her. I thought it would be the monitor that was just straight up, so I tried another. The same problem. I then looked online and saw some article talks about food that may be too low because the amount required for the 8600 was 300w, exactly what my computer. So, I went to Best Buy and bought a 450w power supply and tried with that. Still did not work. I thought it could be the graphics card, so I returned it and got the same exact model, just a new. Still did not work. I even reformatted my entire computer to the settings it had when I bought it, and nothing has worked. I tried to clean my computer, searching for scratches and haven't found anything.

  The only way that the monitor has worked has been without any graphics in it (just the 6150) he built). I've been turned off to repair, because I know in general how to solve small problems like that, even if I can't know all the technical terms for computers (I'm more a guy who recognizes the parts and what they do).

  If someone knows a solution that I have not yet tried, please let me know about it so I can give it a shot and no waste of money do repaired and it have to be a simple solution.

  ----

  Additional information:

  I bought this computer some time in February this year, so it is still fairly new. However, I don't have the receipt so that it doesn't matter where, so I don't think I'm able to do anything with the warranty on it. I have also heard people that they do not cover damage of upgrades (don't know if it of true or not). Is there a way I can still make them fix it, or just get it replaced?

  Message edited by Luckybucket on 01/06/2009 19:42

  The pci-e slot is damaged and I suspect that this has been done when you were installing the 8600. It is not too difficult for the location on the motherboard with static damage physically or a force applied the wrong angle. HP will simply not provide a warranty if you have haveis a computer that cannot be used with the integrated graphics card or maybe (shudder) a simple pci card video.

• HP Pavilion 500-274ea: Hello, I need help please I installed the graphics card and nothing comes only a black screen

  Please help me I bought a new power supply 780w I had 2 graphics card work in my old pc, but on the new pc they do not fan spins everything well but no screen when I plug my graphics card? What should do?

  http://support.HP.com/us-en/document/c04177680

  It comes to my pc

  I fix thanks for reading. I just had to play in the bios for a bit lol like 2 hours but I did the job

• HP 2000-2d62sr can't find the graphics card driver

  I found my product number and the name of the product in the HP support assistant.

  Product name: HP 2000 Notebook PC

  Product number: F1W05EA #ACB

  After installing Windows 7 64 bit, I installed all the drivers except driver for graphics (graphics) card, because I can not find it.

  In device manager when I click on graphics cards, it shows me: Standard VGA Graphics adapt 2 x times and first is not installed.

  Hardware ID:

  PCI\VEN_1002 & DEV_6760 & SUBSYS_1855103C & REV_00
  PCI\VEN_1002 & DEV_6760 & SUBSYS_1855103C
  PCI\VEN_1002 & DEV_6760 & CC_030000
  PCI\VEN_1002 & DEV_6760 & CC_0300

  Sorry for my bad English!

  Hello:

  Your English is very good.

  This driver should work for you...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dob_112859_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Help me choose a good graphics card for my laptop

  Hello guys, first of all let me say I'm glad I found this forum, it's been some time that I wanted to choose and buy a new graphics card for my laptop, but I guess it's time and I'll start by asking help from you.

  My laptop is HP Pavilion g6, the specifications are as follows (using CPU - z)
  CPU: http://prntscr.com/5fqo9f
  Caches: http://prntscr.com/5fqohx
  Motherboard: http://prntscr.com/5fqomk
  RAM: http://prntscr.com/5fqos4
  SPD: http://prntscr.com/5fqoxh
  Graphics card: http://prntscr.com/5fqp1b

  I wanted to ask what kind of graphics card would be suitable for my laptop, and you do you recommend buy me?
  I would like to play all the latest games... I think I need another 4 GB of RAM, and I believe that my CPU is good enough, what do you say guys?

  Thank you!

  Hello

  Your machine:

  http://support.HP.com/us-en/document/c03589219

  Definitely a no no. You need to replace the motherboard, cooling system... The purchase of a new machine, it is much better and cheaper (in terms of time and money).

  Kind regards

• Please help trouble Code 43 error graphics card for XPS 8700 (as well as the disappearance of sleep/Standby Mode) (Windows 10)

  I got my XPS in 2014 and my warranty of service completed in 2015 Jan before I installed Windows 10. So since I've upgraded to Windows 10 I started having problems with by XPS 8700. Now, I have no guarantee. I thought he would go better once they have released an update of the BIOS and it did for a while unfortunately in recent months, I noticed two major issues.

  (1) upon the starting and restarting my computer, my monitor does not end up receiving the signal from the computer and remains dark.

  -Checking that it is not a problem with the monitor by testing with other computers

  -J' checked in the Device Manager and there was a next yellow alert for graphic cards / NVIDIA GeForce GT 635

  -By clicking on, he showed me this: Windows has stopped this device because it has reported problems. (Code 43)

  Unfortunately, it is not the only problem with the graphics card.

  (2) "sleep" my mode is gone (it is related to graphics and BIOS).

  -J' tried the go in power to add setting but it was not yet listed.

  -I went to the command prompt and looked powercfg.exe that's what I discovered:

  C:\Windows\System32>Powercfg - a

  The following sleep States are available on this system:

  Hibernate

  Quick start

  The following sleep States are not available on this system:

  Standby (S1)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S2)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S3) mode

  An internal system component has disabled this standby state.

  Graphics

  Eve (S0 low idle power)

  The system firmware does not support this standby state.

  Hybrid sleep

  Standby (S3) mode is not available.

  Now I really wish I could start or restart my pc without staring at a blank screen and the problem of code 43 with Nvidia GeForce GT 635. Also, I would if I could have the option to upgrade my PC to sleep. I really miss it and do not have to constantly reboot my computer to be able to see anything on the monitor.
  

  I hope someone can help me with these questions without having to reset the pc and reinstall, all over again, that the problem still exists in other cases (I don't have a copy of the installation of programs pre-installed dells so...). This computer is only 2 years old, it didn't need to be retired.

  NVIDIA GeForce GT 635 (PCI\VEN_10DE & DEV_1280) the card is physically wrong and needs to be replaced.