ENVY dv6: Windows reports that the "USB - IF xHCI USB Host Controller" device is not working properly.

I received the instructions to fix it for a while, before the update to Windows 8.1 error below:

I solved the initial problem.

I found the solution on the Forum at http://support.hp.com/us-en/document/c03926756

Tags: Notebooks

Similar Questions

  • Message "USB Mass Storage Device does not work properly"

    Ran AVG PC tune up and referred the problem message "USB storage device work does not correctly. I went to Device Manager, clicked on "bus USB controllers. He showed the device with a yellow exclamation point USB mass storage. I have double clicked on it, went to the drivers and updated the driver. I received a message that the driver was already updated and got a message "device cannot start (code 10).»

    I thought that maybe he was looking for the storage device of mass external and plugged on the USB port. He has shown in the Device Manager under the other mass storage device but had no yellow exclamation point (I guess that means it's very good).

    Is there an internal procedure and what can I do about this problem? My development program, said that this mistake could cause my computer crashes often or he can go for a long time without replying (which it does).

    Hate to be chatty but I wanted to present all the facts.

    Can someone please help me get this figured out? Thank you in advance.

    Hello Sammy,.

    Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause and to check the health of your system, to solve the problem permanently.

    Microsoft does not recommend using third party software melody. That running these software can damage records.

    For the problem with the error code 10, I would ask you to try the steps below:

    A Code 10 error is generated in the Device Manager in one of the following situations:

    1. Device Manager cannot start the device.
    2. One of the pilots who needs the unit does not start.
    3. The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

    Note: In this case, the Code 10 error can be a very generic message indicating some sort of unspecified driver or device problem.

    Error Code 10 is mainly related to devices and hardware driver problems or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

    I suggest you to follow the steps described in the following Microsoft article and see if it works for you.

    FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you.

  • Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Hello!

    I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

    "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

    When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

    Thank you!

    Hello

    You must get the drivers latset for m computer support site.

    Delete the "false: entry in Device Manager and install the new drivers."

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

    System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

    Thanx

    Hi rui2010,
     
    Place your machine in a clean boot State to see if another application is in conflict with the modem.
    If this fails, I recommend you reach out to the community Hauwei for assistance:

     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

    My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    Is anyone know how can I access my hard drive again?

    Thank you

    Hello

    You has made changes to the system before the error appearing?  Cancel the changes.

    (1) in Device Manager > right click on the driver, and then select uninstall

    Reboot and Windows will reload the driver

    (2) remove the upper & lower filters that cause errors in Code 31

    http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

    Access the manufacturer's Web site and search for updated driver

  • This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

    Jake

    Hey Jake,

    Follow these methods.

    Method 1: Follow these steps:

    (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

    (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

    (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

    Remove or reconfigure newly installed unit.

    Restore a version prior to updating the driver.

    Use system restore to undo the Device Manager recent related changes.

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 2: Update the latest graphic drivers.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Error: This device does not work properly because Windows cannot load the...

    I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

    Hi JasonBedgood,

    1. Once you get the error message?
    2. did you of recent changes on the computer?

    This error occurs if the required driver is not installed or the driver is damaged.

    I suggest that you update the driver for the device and check.

    How can I update the driver for network card on the computer

    1. click on Start, click Control Panel, and then double-click System.
    2. click the tab hardware , and then click Device Manager.
    NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
    3. click on network adapters to expand.
    4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
    5. click on Update driver software.
    6. follow the Wizard update software driver to update the driver for NICs .

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
    http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • my computer says that the hlnfd on my plug n play devices does not or is not found. His original my computer to hang and I can't fix.

    my computer says that the hlnfd on my plug n play devices does not or is not found.  His original my computer to hang and I can't fix.  Any ideas?

    Original title: does anyone know how to do the hlnfd works on my windows 7

    See this. This seems to be a remnant of some malicious software

    http://www.bleepingcomputer.com/forums/t/520743/hlnfd-missing-driver/

  • Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

    Original title: WAN miniport driver

    A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    I use windows 8 in my sony vaio
    MODEL - SVE15123CNW

    Hi Praveen,

    Perform the steps suggested by Nirmal S from the link below and see if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-get-an-error-code-31-in-Device-Manager/3364d05a-af20-4f6d-8597-b4b9f6a74b60

    Answer please if you have any questions.

  • My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Hello

    Have you tried to update the drivers as suggested by Basith M?

    Method 1:
    You can run the fix provided in the link and check out them.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/GP/hardware_device_problems


    Method 2:
    You can also try the procedure described in the link to troubleshoot driver issues.
    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

    See also the proposal contained in the link and check.
    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/kb/932520/en-us
  • This device does not work properly because Windows... this device. (Code 31)

    Hello buddies, how to solve this problem (code 31)

    USB does not work on my PC, I found that it was the problem of the unit. and he wrote that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

    How can I solve this problem?

    In addition, you can check the following registry key? :

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

    Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

    If so, what is 'Data' for these names?

  • Just a quickie...? That means USB Host Controller?

    I have a HP Pavilion w/windows ultamate desktop computer. Recently there have been several accidents, but to my surprise was able to restore my pc. I still don't feel not convinced however that everything has been resolved. HP support was not able to solve my problem & refered me to Microsoft.  I have not contacted yet, but plan on it.  Just wanted to know what the heck to 'host' means.

    Read this article - it gives you the basics you need to know about controller USB host (and info on the USP so): http://www.wisegeek.com/what-is-a-hi-speed-usb-host-controller.htm.

    Here is another article with some additional information: http://wiki.answers.com/Q/What_is_a_hi-speed_USB_host_controller.

    Here's a somewhat more detailed article: http://www.usblyzer.com/usb-system-architecture-components.htm.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) my video card does not work why?

    can u help me quickly?

    Hello

    -For how long have you had the problem?
    -Did you change your computer, after which the question began?

    I suggest that you uninstall and reinstall the drivers for video card and check if that helps.

    Uninstall or reinstall a device

    Note: Not applicable for Windows Vista also.

  • The 6to4 card device is not working properly

    Hello

    I did a system health report on my laptop and this problem appeared:

    «The device 6to4 adapt does not work properly... it brings tv_ConfigMgrErr31...» The Plug and Play ID for the device is 14 "

    What this mean and how can I solve this problem?

    Y at - it update?

    I just run Windows Update and my phone is up to date.

    Thank you very much!

    Hello

    1. what version of Windows you are running on the computer?

    2. you remember make changes to your computer before this problem?

    Method 1:

    Follow the steps in this link and check if that helps: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

    Method 2:

    Try to update the drivers for your network card: http://windows.microsoft.com/en-US/windows7/Automatically-get-recommended-drivers-and-updates-for-your-hardware

    Method 3:

    Try to make an auditor of the system files on your computer and search for errors on the disc: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

  • Devices may not work properly after the upgrade

    While trying to update, I received this message:
    "These devices does not work after the upgrade.
    Before the upgrade, we recommend that you update the drivers for those devices.
    Cancel the upgrade, open Control Panel and search for
    "update device drivers", or select the instrument manufacturer
    Web site to search for updated drivers.
     
    Storage controllers: controller IDE ASZE9NGB

    I searched Google, Bing and Microsoft and... nothing. Please help me! Thanks in advance!

    This diagnosis you have done to date?
     
    Did you look in Event Viewer?
     
    Error messages?
     
    Please provide details about your current problem.

    We are better able to help you if you help by providing us with as much information as possible...

    Suggestions for asking for help on a site.

    http://support.Microsoft.com/kb/555375

    http://www.CatB.org/~ESR/FAQs/smart-questions.html

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

Maybe you are looking for

  • Beeps during the call

    My iPhone will beep loud every 15 seconds to everyone but me when I am the creator of a conference call. The tone continues for the person left on the line when everyone has left the call. Beeps start and continue, if the call was in every way a conf

  • can't see 4 of 8 GB of memory

    So, I installed more memory in my 4 GB to 8 GB m8120n and changed the vista 64 operating system. The motherboard only sees igb per slot not too so what am I missing?

  • Windows 7 build 7601 this version of windows is not genuine.

    I bought my HP notebook in April, with Windows 7 preinstalled by HP. Just today, I got the message above came from the lower right corner. Can you explain please?

  • Unable to connect an adapter of TWC DCI401TWC2 with Windows Media Center as there is no option for IR remote IR connection

    I'm trying to install a digital Time Warner Cable DCI401TWC2 adapter model to work with media center. I can get to the extent where Setup search an IR connection, but there is no IR function with the above model and I can't go any further. I can see

  • DUik in AE CS 5.5 installation

    I downloaded the zip file - unpacked and put the files in the Scripts / user interface panel. Now I get the instructions shown in the screenshot below.I did until I realized that I had opened the Terminal. No question. This is the case on my head. Is