Envy H8 1400Z: backup the drive n, t receive data from the refreshment

Similar Questions

• HP photosmart prem 310 cannot receive data from the pc

  Ive installed the new printer hp photosmart prem 310 series. I get a message saying that the printer can receive data from the pc. I have went to hp site and ran updates of drivers and software

  Have you tried that?
  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• HP Envy h8 - 1400z: lack the 2nd hard drive after windows update

  Discount Windows 8 for us solve a problem.  Before the update, I had two drives of 1 TB.  The first hard drive was for the OS C: and D: for the recovery partition.  The second disc has a partition called E: and has been used for data.

  After the update, I still have my partitions C: and D: as before on my first hard drive.   However, no D:.  Using disk management, the first hard disk is visible and it has C: and D:, as well as a few other partitions I do not recognize but appear to be associated with the update. Disk management does not show the second hard drive.

  Starting in UEFI shows the 2nd disc and it is recognized as a 1 TB drive and I have no reason to believe that the drive has failed.

  Did some research and see that others have lost a partition during the refresh, but the road is still visible in disk management.   Their problem is resolved by assigning a drive letter.  However, this does not work for me because the operating system does not see the drive.

  Is it possible that refresh changed my disks in raid 1?  How I check that?  Other thoughts on how I can get my drive back?

  Thanks for any help!

  Hi there @AVperson
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that after a cooling a HDD is no longer appears in disk management. I'm happy to help you.

  Since it does not appear in the BIOS but not in the operating system, let me start with a few BIOS tests on two hard drives. In fact, I suggest doing all the tests of material.

  I see no reason for a system spontaneously create a RAID where there were none before. If the system was a RAID on the second drive would be a mirror of the first, and it must always appear in disk management.

  After testing the system, you can always try remove the second disc and test it using a disk external drive bay on another device and see if it is readable.

  Let me know what you find.

• read and receive data from the server

  Hi all

  I want to develop an application that extract data related to the content of the server, how to do? I read somewhere stating this task requires sdk server push? is it possible do not use push sdk server and the server reading so that I don't have install anyting from the server.

  Your Web service code decides how much data you send or receive from the customer.

  For example, you can have a Web service method, which returns records to a particular date, then you must create a web service method that accepts a date to a string as a parameter and a request for service records of server request, write resultset in encoding (like xml, json, etc) and return this string as a response to the client client will read the data as a byte array, then converts the byte array to the string and according to the encoding defined by service will analyze data of interest.

• Dreamweaver CC 2105 "internal data error - failed to receive data from the network.

  I haven't seen this error before and have used Dreamweaver for many years. But, I am getting very regularly (it's more than intermittent) since the last update of Dreameaver. I'm just checking if it's a bug in Dreamweaver, or a bug of Yahoo Web Hosting.

  What happens is that I log on my SFTP site (sometimes I can not yet connect), then try to download a file and get the message "an FTP error occurred - cannot establish a connection to the host." Internal data error. Unable to connect to the server. ».

  However, and this is the really, really bad bits, the file that WAS on the server (i.e. who was to be replaced) seems to be DELETED, i.e. * before * the update is applied (which is not because of the error). I don't know if Dreamweaver somehow did this or not, but this means that if you were, say, download a revision to top-level index.html file in your site, this file is no longer there, and visitors to your site then sees the * entire * structure of the files in your site - potentially catastrophic.

  I tried to empty the cache to Dreamweaver (http://www.dmxzone.com/go/16740/clearing-dreamweaver-s-cache/), but that makes no difference.

  Did someone else presents itself has found a solution for it (or identified the problem)?

  Thanks in advance!

  There was a few other messages on Yahoo and connection problems recently.

  Have you tried downloading using another FTP, Filezilla client program, yet?

  If the problem that is happening, it may just be a problem with Yahoo. If it isn't, at least your site will be updated while troubleshooting continues with DW.

• How to transform the received data from the file adapter

  Hi '.
  
  I read the data in the XML file using the file adapter, now I want to write the same content I read from this file to a different/new XML file, the problem is that I'm unable to perform a transformation here, when I use a transformation with source element as the output of the reading of file and the target as input in the new file it writes an empty file ,
  I checked the audit trail that showsme that the transformation is empty.
  Please tell me how I transform the item I received a file to make them as input to the next file
  
  Thank you
  Yatan

  You can post your Transformation_3.xsl, I would also like to see the result of the receipt of the readfile.

  I'm not convinced that this XML is correct. I don't expect to see the element xsd: Schema.

  see you soon
  James

• How can I get photos my phone is off and on a backup hard drive?

  How to get photos on my iPhone 5s and a backup hard drive Seagate then delete them from the phone?

  Here you can find some help Managing your iCloud - Apple Support storage space

• Recovering data from hard drives of laptop data

  1. laptop computer work with a hard drive to work (I know that this is the case if you insert the disc of the laptop, it works, it loads windows xp, you can use the laptop according to the normal without errors / problems etc.)

  We have a disk external drive kit (again I know works as I use to connect to a multitude of other hard drives via the USB port of a desktop PC) and I have another kit to different hard drive for the first USB SATA hard drive recovery kit and it does the same thing when you try to access the data on the hard drive for laptops

  If I connect the laptop hard drive to my desktop PC it won't appear in my computer even if you right-click my computer--> manage--> disk management

  The drive appears here as not initialized and will fail if you try to initialize the disk indicating there CRC errors and it will not assign a drive letter.

  Is there a quick way to access the data on the disk?

  As much as I know readers are not encrypted as when loading after the bios POST, you get not all blue / violet loading gauges, this is Windows XP SP 3 so do not use bit locker or something like that.

  What should I do to get access to data as quickly as possible without making too many steps or waiting for utils recovering data, etc..

  Also, what do Lenovo for the drives causing headaches as much?

  Am confused with your part external kits...

  In any case, I assume you have a computer laptop lenovo work and office work. You try to connect lenovo's HARD drive in a USB drive kit and extract data from the desktop.

  (1) is the disc encrpted HARD lenovo? Check the Bios and also if lenovo security software are installed.

  (2) the fastest way I'm doing it today is to connect laptops and office to a network. Share the disk, and then extract the data from the laptop or desktop. A second option is remote laptop and retrieves the data.

  (3) another possibility is that your laptop is XP, IE the formatting isn't AHCI (check the bios under sata), it is in compatibility mode. The Office use Vista or Windows 7?

• How can I use notifications to send data from different sources for the same chart?

  Hello

  I use the model of 'Continuous measurement and logging' project comes with LV 2013.

  It is extremenly helpful in understanding the messaging between the acquisition, graphic and loops of newspaper. (Thank you NEITHER!)

  I ran into a snag though.

  I want to change so that my graphic loop receives notifications of data from two sources of acquisition by the declarant.

  I have trouble getting the data from the two sources to display on one graph.

  I've isolated the problem in the attached vi.

  Here's what happens:

  1. I create 2 parallel loops data and send the data to a third parallel loop with the notifiers.

  2. the third loop receives data from one of the loops because one of the authors of just receiving notifications is to expire instead of receive data.

  Can anyone suggest how can I fix?

  Thank you.

  -Matt

  Here's my modification of your VI. I put notes on the block diagram to explain the changes. He uses a queue for data transfer to avoid data loss. It uses a notifier to stop loops. All local variables and value property nodes have been eliminated.

  The way loops are arrested probably let some data in the queue. No more of one or two iterations of each of the loops of data acquisition. If you need ensure that all data has been displayed (or recorded in a real application), then you must stop acquiring loop first and read the queue until you know it's empty and both other loops stopped. Then stop the render loop and release the queue and the notifier.

  Lynn

• Receiving data using the device RFCOMM Protocol activate bluetooth

  Hi all

  I want to apply that receive the data of bluetooth device using the RFCOMM Protocol.

  I'm pasting some of my code

  Server StreamConnectionNotifier = null, Server1 = null, server2 = null;

  Hi all

  Can some body having any idea or sample code to receive data using the for Bluetooth RFCOMM Protocol. I am able to find a device to activate bluetooth and also connect with it.

  And ther eis a problem plus I only magnified device does not form some sort of link (link Url SPP, OPP Url link, etc.) for bluetooth.

  But I can verify that this device is correct because I am able to receive data from this device to my computer by checking the connection port and to open this port.

• How to send data from the Page with a form to fill out?

  How can I automatically include the page title or any text in my Web page when my client click on the Submit button in a form to fill out?

  This may seem obvious, but if you want to receive data from a form, and then place it in the form. A hidden form field with the title page and the text of your Web page will send these data on the form submission.

  best,

  Shocker

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

  Bookmarks are stored in a file called places.sqlite in the profile folder.
  To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox

• HP ENVY 17-j101ex - replace the SSD HARD drive

  Hello

  I have HP ENVY 17-j101ex, with the standard configuration: 2 x 1 TB drive HARD 5400 RPM SATA. I want to buy 1 SSD drive and replace the first (boot) hard disk drive. I don't know if it works or not.

  I want to buy a SSD Samsung 840 EVO 250 GB SATA III (MZ-7TE250BW), 2.5 ", dimensions: 100 x 69 x 7 mm

  I have to: 1 x 1 TB HARD drive (as a secondary drive) + 1 x 250 GB SSD SATA3 (as your startup with system disk)

  Is this ok?

  I found some info, that:

  Supports a 6.35 cm (2.5 in) 300 GB or 160 GB SSD (SSD) drive in 7, 0 - mm (. 28 - in.) thick

  Supports 6.35 cm (2.5 in) hard disks to 12.7 mm (. 50-in) and a height of 9.5 mm (. 37 - in)

  Is it not this Samsung SSD too big?

  I also found information on envy 17 series, which:

  Supports the following single hard drive/solid-state drive combination configurations:
  ● 1-TB, 5400-rpm, 12.7-mm hard drive × 1 + 300-GB solid-state drive
  

  and also:

  NOTE: Supports RAID-0 as default for all dual hard drive/solid-state drive combination configurations.
  

  So, first of all should I disable RAID-0?

  Thank you for your help and sorry for my English

  In fact, I have the same model laptop PC series. You will have no problem replacing the mechanical main hard drive with an SSD. The Evo to Samsung 250 Gig is a very good choice. I suggest you get cloning software, put the SSD in the second slot, start from cloning software and copy (clone) the startup disk for the SSD. You'll slim down the contenst of the diskette of starting less than 250 concerts to achieve, but you can store files off to the second disk of 1 TB in the process. There are other ways to do this post if you have any questions.

  Here is a video showing how to install the hard drive.

  https://www.YouTube.com/watch?v=wx3dMGXrGCc

  RAID-0 is supported, but you wouldn't want as a second hard drive with an SSD. If your readers are appearing as volumes of letters separated in 'the PC' or 'Computer' then RAID-0 does not exist and you shouldn't have to do any disorder in the BIOS.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Unable to backup on drive F or deletion of the D drive.

  When I try a backup of my F drive, the program uses by default the D drive (which is now complete.  I tried repeatrdly to backup the disk F stand alone without success.  Also I don't know the way to delete the files from D drive.

  I use a laptop Dell Inspiron 1720.

  Help would be very appreciated.

  Hi maryship,

  For the backup location change of drive D to drive F, you will need to change the location of backup on the computer.

  When you configure your computer to automatically back up files, you specify a location where the files will be stored. You can change this location if you run out of space in the current location or you want to change the type of storage location (for example, a DVD, a hard disk on your computer or a shared folder on another computer on a network).

  1. open the Center to backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click backup and Restore Center.
  2. click on change settings.
  3. click change backup settings, and follow the steps in the wizard. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  In order to delete the files to the D drive, you will need to delete the files you don't need.
  Just right click on the files and then click on remove.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.