envy h8 1559: there is no such thing as RTL8171EH-CG Gigabit Ethernet Controller.

Hi Hp.

My Network RTL8171EH-CG controller do not exist in the system. I use all the command lines that I know not, but nothing.

what I get from ip link: lo: LOOPBACK, upward, LOWER_UP > mtu 65536 qdisc noqueue State UNKNOWN mode DEFAULT default group
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00.   Is - fixable?   Tkanks

Hi,: RTL8171EH-CG Gigabit Ethernet Controller was destroyed because I removed the video card and ram to upgrade to them.

I bought an ethernet card external usb 3.0 and it's all good now.   Good bye.

Tags: HP Desktops

Similar Questions

  • I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

    I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

    I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

    Try this...

    Quit Safari.

    Open a Finder window. In the Finder menu bar, click go > go to folder

    Type or copy paste the following text:

    ~/Library/preferences/com. Apple.Safari.plist

    Click OK, and then move the com.apple.Safari.plist file to the trash.

    Restart Safari to test.

  • Cannot install the FSX SDK says that there is no such thing as the E: drive.

    Original title: games

    I try to install the FSX SDK on a second computer.  He settled not and says that there is no such thing as the E: drive.  There is no windows popping up for me so that it points in the right direction.  It will also not be installed the full Simulator for the same reason.  What, besides to create a new partition on hard drive, I do?

    Hi Todd Moore,

    ·         What version of the operating system is installed on the computer?

    ·         You get the error message?

    ·         Did you do changes on the computer before the show?

    ·         He has already worked?

    Follow these methods.

    Method 1: Try to install the game as administrator.

    How to apply once with a full administrator access token?

    Method 2: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 4: Follow the steps in the article.

    Error message when you install a Microsoft game or a mapping program

    Microsoft games: InstallShield Error Messages

    For reference:

    Solve problems with activation for Microsoft games problems and mapping programs

    Frequently asked questions on how to enable Microsoft Games for Windows, streets and trips and Mappoint

  • There is no such thing as membership. (but he does)

    I had a 1 year of creative cloud subscription, when I bought the new pc and installed clouds now all applications are the trial. It is said that there is no such thing as my subscription. What can I do to recover my membership?

    Windows 7:

    Run the Microsoft Fix tool and reset the Hosts file:

    http://go.Microsoft.com/?linkid=9668866

    Windows 8/8.1:

    To reset the default Hosts file, follow these steps:

    1. Open Notepad. To do this, drag from the right edge of the screen, tap Search, type Notepad, and then press the Notepad icon. Or, if you use a mouse, point to the upper right of the screen, move the pointer of the mouse down, click Search, type Notepad and then click Notepad.
    2. Copy the following text, and then paste the text into the file:
      # Copyright (c) 1993-2006 Microsoft Corp. # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # This file contains the mappings of IP addresses to host names. Each entry # should be kept on an individual line. The IP # must be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one space of #. # Additionally, comments (such as these) may be inserted on lines # individual or follows the name of the computer that is designated by a symbol "#". # Example: # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client name resolution host # localhost is handle in DNS itself. # 127.0.0.1 localhost #: 1 localhost
    3. On the file menu, tap or click on record under, type "hosts" in the file name box (as shown in the image below), then save the file to the desktop.
    4. Close Notepad.
    5. Open the folder % WinDir%\System32\Drivers\Etc. To do this, follow these steps:
      1. Drag from the right edge of the screen, tap Search, type run and then press the run icon. Or, if you use a mouse, point to the upper right of the screen, move the pointer of the mouse down, click Search, type run, and then click the run icon.
      2. Type %WinDir%\System32\Drivers\Etc in the Open box, and then press or click OK.
    6. Select the Hosts file, tap and click Rename, and then rename the file to "Hosts.old".
    7. Copy or move the Hosts file that you created in step 3 in % WinDir%\System32\Drivers\Etc. If you are prompted for an administrator password, press or click continue.
  • There is no such thing as a cluster of servers - Rolling Restart/Redeploy - consistency managed?

    I followed the example of wlst provided with the installation of WebLogic 12.1.2 to perform rolling redeployment (using the gar_common.py script and a test_redeploy.py custom script)

    The command I am running is:

    garRedeploy ('GAR','C:\applications\GAR.gar ',' the consistency-cluster "," NODE-SAFE ', ' 120', upload = 'true')

    The error I get is:

    There is no such thing as consistency-cluster Cluster

    Leaving WebLogic Scripting Tool.

    But I have a running cluster, named 'Coherence-cluster' and I'm able to connect (client node) without any problem.  Any idea what the problem might be?

    Login to work the client node:

    2014-01-23 15:54:44.702/0.303 Oracle coherence 12.1.2.0.0 < Info > (thread = main Member, = n/a): responsible operational configuration of "jar:file:/C:/oracle/Middleware/Oracle_Home/coherence/lib/coherence.jar!/tangosol-coherence.xml".

    2014-01-23 15:54:44.772/0.373 Oracle coherence 12.1.2.0.0 < Info > (thread = main Member, = n/a): responsible for operational substitutions of "jar:file:/C:/oracle/Middleware/Oracle_Home/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml".

    2014-01-23 15:54:44.849/0.450 Oracle coherence 12.1.2.0.0 < Info > (thread = main Member, = n/a): responsible for operational substitutions of "file:/C:/Users/x163569/Desktop/XXXXX/002%20-%20Phase%202/GAR/config/tangosol-coherence-override.xml".

    2014-01-23 15:54:44.855/0.456 Oracle coherence 12.1.2.0.0 < D5 > (thread = main Member, = n/a): configuration optional override "cache-factory - config.xml" is not specified

    2014-01-23 15:54:44.855/0.456 Oracle coherence 12.1.2.0.0 < D5 > (thread = main Member, = n/a): configuration optional override "cache-factory-generator - config.xml" is not specified

    2014-01-23 15:54:44.856/0.457 Oracle coherence 12.1.2.0.0 < D5 > (thread = main Member, = n/a): configuration optional override "/ custom - mbeans.xml ' is not specified

    Oracle Version 12.1.2.0.0 Build 44396 consistency

    Grid edition: development Mode

    Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.

    2014-01-23 15:54:45.177/0.778 Oracle coherence GE 12.1.2.0.0 < Info > (thread = main Member, = n/a): configuration of the loaded cache of 'file:/C:/Users/x163569/Desktop/XXXXX/002%20-%20Phase%202/GAR/config/client-cache-config.xml '.

    2014-01-23 15:54:45.310/0.911 Oracle coherence GE 12.1.2.0.0 < Info > (thread = main Member, = n/a): configuration of the loaded cache of 'file:/C:/Users/x163569/Desktop/XXXXX/002%20-%20Phase%202/GAR/config/client-cache-config.xml '.

    Using the Extensible environment of incubator for consistency of the Cache Configuration

    Copyright (c) 2013, Oracle Corporation. All rights reserved.

    2014-01-23 15:54:45.464/1.065 Oracle coherence GE 12.1.2.0.0 < Info > (thread = main Member, = n/a): created cache factory com.oracle.coherence.environment.extensible.ExtensibleEnvironment

    2014-01-23 15:54:45.471/1.072 Oracle coherence GE 12.1.2.0.0 < Info > (thread = main Member, = n/a): XML Extensible environment configuration has been reset.  Will now reboot. Class: com. Oracle.Coherence.Environment.extensible.ExtensibleEnvironment method: setConfig

    2014-01-23 15:54:45.472/1.073 Oracle coherence GE 12.1.2.0.0 < Info > (thread = main Member, = n/a): XML Extensible environment configuration has been reset.  Will now reboot. Class: com. Oracle.Coherence.Environment.extensible.ExtensibleEnvironment method: setConfig

    Using the Extensible environment of incubator for consistency of the Cache Configuration

    Copyright (c) 2013, Oracle Corporation. All rights reserved.

    2014-01-23 15:54:45.744/1.345 Oracle coherence GE 12.1.2.0.0 < D4 > (thread = main Member, = n/a): TCMP linked to /172.23.46.33:9109 using SystemDatagramSocketProvider

    2014-01-23 15:54:46.239/1.840 Oracle coherence GE 12.1.2.0.0 < Info > (thread = Cluster, Member = n/a): this member (Id = 7, Timestamp is 2014-01-23 15:54:46.048 address = 172.23.46.33:9109, MachineId = 42520, location = site:, machine: L035799, process: 9780, role = XXXXXDgTestEntityTest, edition = Grid Edition, Mode = development, CpuCount = 4, SocketCount = 4) arrival in the 'Cohérence-cluster' cluster with the upper limbs (Id = 9, 2014-01-23 13:17:41.469 = Timestamp, address = 172.23.46.33:9103, MachineId = 42520, location = site (: machine: L035799, process: 8700, role = MBean-Connector, edition = Grid Edition, Mode = development, CpuCount = 4 SocketCount = 4)

    2014-01-23 15:54:46.445/2.046 Oracle coherence GE 12.1.2.0.0 < D5 > (thread = Cluster, Member = n/a): Member (Id = 2, Timestamp is 2014-01-23 15:46:31.41 address = 172.23.46.33:9099, MachineId = 29707, location = site:, machine: Machine-1, process: 580, members: ManagedCoherenceServer-2, role = WeblogicServer) joined the Cluster with senior member 9

    2014-01-23 15:54:46.451/2.052 Oracle coherence GE 12.1.2.0.0 < D5 > (thread = Cluster, Member = n/a): Member (Id = 3, Timestamp = 2014-01-23 15:51:37.978 address = 172.23.46.33:9105, MachineId = 42520, location = site:, machine: L035799, process: 9648, members: AdminServer, role = WeblogicServer) joined the Cluster with senior member 9

    2014-01-23 15:54:46.452/2.053 Oracle coherence GE 12.1.2.0.0 < D5 > (thread = Cluster, Member = n/a): Member (Id = 4, Timestamp is 2014-01-23 13:28:40.287 address = 172.23.46.33:9101, MachineId = 29707, location = site:, machine: Machine-1, process: 6340, members: ManagedCoherenceServer-1, role = WeblogicServer) joined the Cluster with senior member 9

    2014-01-23 15:54:46.452/2.053 Oracle coherence GE 12.1.2.0.0 < D5 > (thread = Cluster, Member = n/a): Member (Id = 6, Timestamp is 2014-01-23 15:52:49.546 address = 172.23.46.33:9107, MachineId = 29707, location = site:, machine: Machine-1, process: 9880, members: ManagedCoherenceServer-3, role = WeblogicServer) joined the Cluster with senior member 9

    2014-01-23 15:54:46.485/2.086 Oracle coherence GE 12.1.2.0.0 < Info > (thread = main Member, = n/a): started cluster name = cluster consistency

    WellKnownAddressList (size = 1,

    WKA {address = 172.23.46.33, Port = 9099}

    )

    () MasterMemberSet

    ThisMember = member (Id = 7, Timestamp is 2014-01-23 15:54:46.048 address = 172.23.46.33:9109, MachineId = 42520, location = site:, machine: L035799, process: 9780, role = XXXXXDgTestEntityTest)

    OldestMember = member (Id = 9, Timestamp is 2014-01-23 13:17:41.469 address = 172.23.46.33:9103, MachineId = 42520, location = site:, machine: L035799, process: 8700, role = MBean-connector)

    ActualMemberSet = MemberSet (Size = 6

    Member (Id = 2, Timestamp is 2014-01-23 15:46:31.41 address = 172.23.46.33:9099, MachineId = 29707, location = site:, machine: Machine-1, the process: 580, members: ManagedCoherenceServer-2, role = WeblogicServer)

    Member (Id = 3, Timestamp = 2014-01-23 15:51:37.978 address = 172.23.46.33:9105, MachineId = 42520, location = site:, machine: L035799, process: 9648, members: AdminServer, role = WeblogicServer)

    Member (Id = 4, Timestamp is 2014-01-23 13:28:40.287 address = 172.23.46.33:9101, MachineId = 29707, location = site:, machine: Machine-1, the process: 6340, members: ManagedCoherenceServer-1, role = WeblogicServer)

    Member (Id = 6, Timestamp is 2014-01-23 15:52:49.546 address = 172.23.46.33:9107, MachineId = 29707, location = site:, machine: Machine-1, the process: 9880, members: ManagedCoherenceServer-3, role = WeblogicServer)

    Member (Id = 7, Timestamp is 2014-01-23 15:54:46.048 address = 172.23.46.33:9109, MachineId = 42520, location = site:, machine: L035799, process: 9780, role = XXXXXDgTestEntityTest)

    Member (Id = 9, Timestamp is 2014-01-23 13:17:41.469 address = 172.23.46.33:9103, MachineId = 42520, location = site:, machine: L035799, process: 8700, role = MBean-connector)

    )

    Member ID | ServiceVersion | ServiceJoined | Member State

    2. 12.1.2 | 15:46:31.41 2014-01-23 | JOINED,

    3. 12.1.2 | 15:51:37.978 2014-01-23 | JOINED,

    4. 12.1.2 | 13:28:40.287 2014-01-23 | JOINED,

    6. 12.1.2 | 15:52:49.546 2014-01-23 | JOINED,

    7. 12.1.2 | 15:54:46.048 2014-01-23 | JOINED,

    9. 12.1.2 | 13:17:41.469 2014-01-23 | JOINING

    RecycleMillis = 1200000

    RecycleSet = MemberSet (Size = 2

    Member (Id = 1, Timestamp = 2014-01-23 15:36:19.749, address = 172.23.46.33:9105, MachineId = 42520)

    Member (Id = 5, 2014-01-23 15:45:38.516 = Timestamp, address = 172.23.46.33:9099, MachineId = 29707)

    )

    )

    TcpRing {connection = [6]}

    IpMonitor {address = 0}

    2014-01-23 15:54:46.508/2.109 Oracle coherence GE 12.1.2.0.0 < D5 > (thread = Invocation: management, Member = 7): service management joined the cluster with the senior members of the service 9

    2014-01-23 15:54:46.541/2.142 Oracle coherence GE 12.1.2.0.0 < Info > (thread = main Member, = 7): configuration of journalist in charge of "jar:file:/C:/oracle/Middleware/Oracle_Home/coherence/lib/coherence.jar!/reports/report-group.xml".

    2014-01-23 15:54:46.837/2.438 Oracle coherence GE 12.1.2.0.0 < Info > (thread = DistributedCache:GAR:DistributedCache, Member = 7): configuration of POF in charge of "file:/C:/Users/x163569/Desktop/XXXXX/002%20-%20Phase%202/GAR/config/client-pof-config.xml".

    2014-01-23 15:54:46.862/2.463 Oracle coherence GE 12.1.2.0.0 < Info > (thread = DistributedCache:GAR:DistributedCache, Member = 7): charged included POF configuration of "jar:file:/C:/oracle/Middleware/Oracle_Home/coherence/lib/coherence.jar!/coherence-pof-config.xml".

    2014-01-23 15:54:46.897/2.498 Oracle coherence GE 12.1.2.0.0 < D5 > (thread = DistributedCache:GAR:DistributedCache, Member = 7): Service GAR:DistributedCache joined the cluster with the senior members of the function 4

    I would not recommend using a modified version of the gar_common.py. As you can see in the source comments, garRedeploy() is intended to receive a Weblogic cluster, not a cluster of coherence. I tried a modified version that receives a cluster of consistency, and I'm done with additional deployments in external servers to the cluster of consistency, specifically the server administrator.

    If your coherence cluster contains several cluster WebLogic, call garRedeploy() for each group of Weblogic.

  • There is no such thing as ADX_PRE_AUTOCONFIG.

    Dear administrators,

    I'm on the 11i upgrade process (11.5.10.2 (db 9.2.0.6.0)) R12 (12.1.3 (11.2.0.2)) & OS or OEL 4.5.

    In this process, I applied 9.2.0.8 patch in db level and 8815204 patch at the applications level.

    When you use autoconfig on db level his view that there is no such thing as adx_pre_autoconfig. File restore...

    What to do now possible one suggests


    Thanks and greetings
    RAM

    Please post the full error message to the log file.

    Please see if (fatal error encountered when running Txkrun.Pl [417817.1 ID]) help.

    Make sure you have the latest patches AutoConfig applied.

    Thank you
    Hussein

  • SDO_GEOM. VALIDATE_GEOMETRY_WITH_CONTEXT returns that there is no such thing as ORA - 13199 SRID

    Hello world

    I'm dealing with this error while trying spatial data bad list (11.0.2.0.3 (AIX) RAC)

    Select *.

    Table

    Where SDO_GEOM. VALIDATE_GEOMETRY_WITH_CONTEXT (GEOMETRY, 0.001)! = 'TRUE '.

    It returns:

    ORA-13199: there is no SRID

    ORA-06512: at the 'MDSYS. MD", line 1723

    ORA-06512: at the 'MDSYS. MDERR", line 17

    ORA-06512: at the 'MDSYS. SDO_CS", line 5328

    ORA-06512: at the 'MDSYS. SDO_GEOM", line 483

    ORA-06512: at the 'MDSYS. SDO_GEOM", line 560

    ORA-06512: at line 1

    Is there someone who faced this kind of question or any idea?

    Thanks in advance

    Concerning

    There is no such 2000303 SRID. However, it seems that, as it does the same thing. Replace all values in SRID 2320 and you should be set.

    SQL > select *.

    2 of MDSYS. SDO_COORD_REF_SYSTEM

    3 where srid = 2320;

    SRID COORD_REF_SYS_NAME COORD_REF_SYS_KIND

    ---------- -------------------------------------------------------------------------------- ------------------------

    COORD_SYS_ID DATUM_ID GEOG_CRS_DATUM_ID SOURCE_GEOG_SRID PROJECTION_CONV_ID CMPD_HORIZ_SRID CMPD_VERT_SRID

    ------------ ---------- ----------------- ---------------- ------------------ --------------- --------------

    INFORMATION_SOURCE

    ------------------------------------------------------------------------------------------------------------------------

    DATA_SOURCE IS_LE LEGACY_CODE

    ---------------------------------------- ----- -----------

    LEGACY_WKTEXT

    ------------------------------------------------------------------------------------------------------------------------

    LEGACY_CS_BOUNDS (SDO_GTYPE, SDO_SRID, SDO_POINT_TYPE (X, Y, Z), ANSDO_ELEM_INFO, SDO_ORDINATES)

    ------------------------------------------------------------------------------------------------------------------------

    IS_VA SUPPO

    ----- -----

    ED50 2320 / PROJECTED TM30

    4530 6230 4230 16370

    Major mapping via EuroGeographics; http://CRS.IFAG.de/

    EPSG                                    FALSE

    TRUE TRUE

  • The Windows fax service cannot start because there is no such thing as a privilege in the fax service account.

    I'm trying to set up Windows Fax and Scan to store faxes "received" in a folder encrypted (EFS). (I use Windows Vista Business).

    The fax service will not start if it set to log on as a "local system account", but faxes are stored with the certificate of local system and inaccessible to other users.

    To work around this problem, I tried to configure the Fax Service to log on under a specific user account. However, after that and try to re - start the Service I get.

    Error: 1297 as a service privilege is needed to function properly does not exist in the service account configuration.

    One of the services that begins with the "local system account" does not automatically start with a normal user account and if you get the message.  Most of the services are designed to start with the local system account and not a special user account (actually, not on my system using a specific user account for services).  I think that part is OK and you must return it to the local system account (so eliminate the error message and remove that as a problem to solve).

    I think the question may also be a permissions problem in the user access to the fax.

    To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

    To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

    If that is indeed a problem of certificates (and it seems there is a but looks like he takes care of himself with the Wizard), then we must make the certificate available to all users of the system (from where it is now stored) - and I think I saw how to do this in secpol.msc.  Here is some information I found on EFS secpol.msc in the public key policies (you can get it by entering this in the area of research and the antering and then a double click on the program icon that appears) where you would put in place.

    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    The Encrypting File System (EFS) is an encryption technology of base file used to store the encrypted files on NTFS file system volumes. Encrypted files cannot be used unless the user has access to the keys needed to decrypt the information.

    Encryption is transparent to the user that encrypted the file. This means that you don't have to manually decrypt the encrypted file before that you can use. You can open and edit the file as you normally would. Once you encrypt a file or folder, you work with the encrypted file, or a folder like you do with any other file or folder.

    The use of EFS is similar to using permissions on files and folders. Both methods can be used to restrict access to the data. However, an attacker who gets physical access unauthorized to your encrypted files or folders will be prevented from reading. If the intruder tries to open or copy your encrypted file or folder, he or she receives an access denied message. Permissions on files and folders do not protect against unauthorized physical attacks.

    You encrypt or decrypt a folder or file by setting the property of encryption for files and folders, as you define another attribute such as read-only, compressed, or hidden. If you encrypt a folder, all files and subfolders created in the encrypted folder are automatically encrypted. It is recommended that you encrypt at the folder level.

    You can also encrypt or decrypt a file or folder using the Cipher command.

    When you work with encrypted files and folders, keep in mind the following information:

    • Only the files and folders on NTFS volumes can be encrypted. However, you can use Web distributed authoring and versioning (WebDAV), which also works with NTFS, to transfer files in encrypted form.
    • Files or compressed files can also be encrypted. If the user marks a file or folder for encryption, that file or folder will be uncompressed.
    • Encrypted files are decrypted if you copy or move the file to a volume that is not an NTFS volume.
    • Moving files unencrypted in an encrypted folder will automatically cause these files to be encrypted in the new folder. However, the reverse will not automatically decrypt files. The files must be explicitly decrypted.
    • Files marked with the system attribute cannot be encrypted, nor can files in the system root directory structure.
    • Encrypt a file or a folder does not protect against the removal or the list of files or directories. Anyone with the appropriate permissions can delete or list encrypted folders or files. For this reason, the use of EFS in combination with NTFS permissions is recommended.
    • You can encrypt or decrypt files and files located on a remote computer that has been enabled for remote encryption, but, in this version of Windows, the data that is transmitted over the network by this process is not encrypted. Other protocols, such as Secure Socket Layer/Transport Layer Security (SSL/TLS) or Internet Protocol security (IPsec) must be used to encrypt data while they are transmitted over the network. (You can also use WebDAV, as described in the first bullet, to pass the file in encrypted form.)

    EFS policy settings

    You can use Group Policy to configure a number of EFS settings.

    Allow or disallow the EFS

    You can choose to allow or prohibit the use of EFS altogether. If you do not configure the policy settings for EFS, it is OK.

    The EFS options

    If you choose to allow EFS, you can also select a number of options, such as whether to automatically encrypt the Documents folder of the user, to require a smart card for use with EFS, to cache keys created based on a smart card, to enable the encryption of the Windows page file, or to notify users to make the backup copies of their encryption keys.

    EFS certificate

    EFS encryption is based on the pairs of keys associated with certificates. In most managed environments, the certificates are issued by a certification authority (CA) running in the field. Users can automatically be issued a certificate from the CA without manual intervention. EFS settings include a drop-down models of certificates that are available in the field list so that you can specify which certificate template to use for autoenrollment.

    Note
     

    The list includes all the models of certificates, present in the field. An administrator must configure the CA so that certificates can be issued. Some displayed certificates are not available.

    In cases where a certificate cannot be issued by a certification authority, EFS can use a self-signed certificate created on the local computer (there is a section in secpol.msc to create a certificate). You can choose to disable this functionality and specify a default key length.

    -------------------------------------------------------------------------------------------------------------------------------------------------------------------

    I don't know if that helped or not.  Please let us know and be specific about what other questions, you may have because I don't know what you mean and which is still confusing (and to be honest, I am a little confused at this point - it is not an easy task to accomplish).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / A +.

  • There is no such thing as PushService createChannelCompleted signal

    Dear BlackBerry developers

    I am building an active push application. So I started with the PushService class to create a session and a channel and other things. Because I need the token server gives to my application, I need to connect with the createChannelCompleted (const bb::network:ushStatus status, const QString & token) signal. This signal is copy pasted from the documentation on here http://developer.blackberry.com/cascades/reference/bb__network__pushservice.html.

    But I always get the following error message

    Object::connect: No such signal PushManager::createChannelCompleted

    I tried all the ways to connect with the signal

    connect(pushService, SIGNAL(createChannelCompleted(const bb::network::PushStatus&, const QString&)), this, SIGNAL(createChannelCompleted(const PushStatus&, const QString&)));
    

    But I can't get it right, apparently.

    Thanks in advance!

    Hello

    This should work:

    QObject::connect(service, SIGNAL(createChannelCompleted(bb::network::PushStatus,QString)),
                         this, SLOT(onCreateChannelCompleted(bb::network::PushStatus,QString)));
    

    Statement of slot: / / upd: fixed a statement of slot

    void onCreateChannelCompleted(const bb::network::PushStatus &status, const QString &token);
    

    Your statement should probably also work if you replace second SIGNAL() SLOT() and use a full PushStatus in the slot. But for const const reference and & can be left inside the SIGNAL() and SLOT() statements. MOC will remove them automatically anyway.

  • Error reported: Thunderbird will try to download a message that says that there is no such thing as the mail server. 86 other pending messages

    For the last two days, I can't get the messages. The following error message appears: "the RETR command failed. Error when retrieving a message. "Mail server pop3.tiscali.co.uk responded: cannot open the file ' /nfs2/mailgb/mail_29/27/12/a.lockley%tiscali.co.uk/0A70004056E64E83.msg' errno 2, the file does not exist. He has apparently 86 messages to download and more are arriving regularly

    Looks like there may be a logjam caused by either the webmail junk folder or more old not yet downloaded email.

    Try this:
    Account sign-in webmail via a browser.
    Empty folder 'spam' to the server.
    In Thunderbird new attempt to get the Messages.

    If still a problem:
    Access webmail.
    Read email oldest, but not yet downloaded.
    Delete or move to another folder.
    In Thunderbird new attempt to get the Messages.

    Report on the results.

  • Cannot delete emails to the trash folder - get the error message that there is no such thing as trash.

    Normal action when I delete an email - it usually goes to the trash.
    Now, it remains in the Inbox and I get the following error message:

    The 'Inbox' ongoing operation has failed. The e-mail server for this folder has responded: there is no mailbox (TRYCREATE): Trash.

    I checked the dialog box location under choice of account of this folder and the Info for the Trash subfolder is the same for the other subfolders.

    SD

    SDuffy,

    Thanks for posting back the trash became operational after restarted Thunderbird. I'll mark your answer as solving the problem.

  • Why there is no such thing as my Satellite P300D-12Y?

    Is my product name: Satellite P300D-12 years, but the support home page, there is not any product with that name.
    I tried to enter the serial number, but there is only the message "means enter a serielnumber valid.

    And if I use the automatic detection, the program cannot find my product.
    It's frustrating because I don't know how to upgrade my pc now.

    I hope someone can help me.

    Hello

    Did you look in the lower corner s computer laptop?
    To do this and you will find labels with numbers.

    You will find a model number of portable something like:
    Satellite P300D-12Y PSPDCE-00P005GR

    I think you've probably noticed that page European driver Toshiba lists not all laptops using model numbers but the mobile phone number of series; PSPDCE example
    Therefore, search by Satellite P300D PSPDCE

    It s easy isn t it?

  • There is no such thing as Netlogon share

    Hi all

    I have problems with SBS 2008. I am a consultant and the company has a computer scientist. I don't get all the answers I need, but for now, I am all that and that person is not allowed on the servers.

    I get the error 'Failed to connect in the NETLOGON share!' when you run DCDIAG. I followed the discussions here and completing restore of sysvol. There place in the SYSVOL directory while now I SYSVOL\SYSVOL C:\Windows. Replication seeme to work. When I performed the restoration of authorittive got event 13516 newspaper FRS indicating that AD is no longer prevents this computer from becoming a domain controller. Here are the results of the DCDIAG. Thanks for any help on this.

    Directory Server diagnosis

    Perform the initial configuration:

    Trying to find the server at home...

    Home Server = HHTSBS

    * Identified AD forest.
    Made the initial collection of information.

    Make the required initial tests

    Test server: Default-First-Site-Name\HHTSBS

    Commencement of the trial: connectivity

    ......................... HHTSBS passed test connectivity

    Primary testing

    Test server: Default-First-Site-Name\HHTSBS

    Commencement of the trial: advertising

    ......................... HHTSBS passed test advertising

    Beginning of the test: FrsEvent

    He cautioned there or error in the last 24 hours events after that share SYSVOL has been shared.  Fault of SYSVOL

    replication problems may cause group policy issues.
    ......................... HHTSBS test FrsEvent

    Commencement of the trial: DFSREvent

    ......................... Test HHTSBS DFSREvent

    Commencement of the trial: SysVolCheck

    ......................... Test HHTSBS SysVolCheck

    Beginning of the test: KccEvent

    ......................... HHTSBS test KccEvent

    Beginning of the test: KnowsOfRoleHolders

    ......................... HHTSBS test KnowsOfRoleHolders

    Beginning of the test: MachineAccount

    ......................... HHTSBS test MachineAccount

    Beginning of the test: NCSecDesc

    ......................... HHTSBS passed test NCSecDesc

    Beginning of the test: NetLogons

    Cannot connect in the NETLOGON share. (\\HHTSBS\netlogon)

    [HHTSBS] An net use or LsaPolicy operation failed with error 67, the network name cannot be found...

    ......................... HHTSBS failed test NetLogons

    Commencement of the trial: ObjectsReplicated

    ......................... Test HHTSBS ObjectsReplicated

    From test: Replications

    ......................... Test HHTSBS past replications

    Beginning of the test: RidManager

    ......................... HHTSBS passed test RidManager

    Commencement of the trial: Services

    ......................... HHTSBS test passed Services

    Beginning of the test: SystemLog

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 12:28:30 27/02/2016

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 27/02/2016-12:29:26

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 27/02/2016-12:33:33

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 12:34:32 27/02/2016

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    An error event occurred.  Event ID: 0 x 40000004

    Generated time: 27/02/2016-12:36:55

    The event string:

    The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server iis-webserver-$1. The target name used was cifs/hhtweb.hht.local. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Please ensure that the objective of SPN is registered and only registered on, the account used by the server. This error can also occur when the target service uses a different for the target service account password for that target that the Distribution Center of the keys Kerberos (KDC) has for the service account. Please ensure that the service on the server and the KDC are both set to update to use the current password. If the server name is not complete and the target domain (VRD. LOCAL) is different from the customer area (VRD. (LOCAL), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 12:38:37 27/02/2016

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 27/02/2016-12:39:37

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 27/02/2016-12:43:40

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 12:44:42 27/02/2016

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 12:48:42 27/02/2016

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 27/02/2016-12:49:48

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 27/02/2016-12:53:45

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 27/02/2016-12:54:53

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 27/02/2016-12:58:48

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 27/02/2016-12:59:58

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 27/02/2016 13:03:51

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 27/02/2016 13:05:04

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 27/02/2016 13:08:54

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 27/02/2016 13:10:09

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 27/02/2016 13:13:57

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 27/02/2016 13:15:14

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 27/02/2016 13:19

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 27/02/2016 13:20:20

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    An error event occurred.  Event ID: 0 x 00000422

    Generated time: 27/02/2016 13:24:03

    The event string:

    The processing of Group Policy failed. Windows tried to read the file \\hht.local\SysVol\hht.local\Policies\{E9232823-50CC-41E7-BED9-F19F54AA608F}\gpt.ini from a domain controller and has failed. Group Policy settings cannot be applied until this event is resolved. This problem may be transient and can be caused by one or more of the following:

    An error event occurred.  Event ID: 0xC0001B77

    Generated time: 27/02/2016 13:25:25

    The event string:

    The Microsoft Exchange Transport service ended unexpectedly.  It has done this 1 time.  The following corrective action will be performed in 5000 milliseconds: restart the service.

    ......................... HHTSBS failed test SystemLog

    Commencement of the trial: VerifyReferences

    ......................... Test HHTSBS VerifyReferences

    Running partition tests: ForestDnsZones

    Beginning of the test: CheckSDRefDom

    ......................... ForestDnsZones passed test CheckSDRefDom

    Beginning of the test: CrossRefValidation

    ......................... ForestDnsZones passed test CrossRefValidation

    Running partition tests: DomainDnsZones

    Beginning of the test: CheckSDRefDom

    ......................... DomainDnsZones passed test CheckSDRefDom

    Beginning of the test: CrossRefValidation

    ......................... DomainDnsZones passed test CrossRefValidation

    Running partition tests: schema

    Beginning of the test: CheckSDRefDom

    ......................... Schema passed test CheckSDRefDom

    Beginning of the test: CrossRefValidation

    ......................... Schema passed test CrossRefValidation

    Running partition tests: Configuration

    Beginning of the test: CheckSDRefDom

    ......................... Configuration test past CheckSDRefDom

    Beginning of the test: CrossRefValidation

    ......................... Configuration test past CrossRefValidation

    Running partition tests: HHT

    Beginning of the test: CheckSDRefDom

    ... VRD test CheckSDRefDom

    Beginning of the test: CrossRefValidation

    ... VRD test CrossRefValidation

    Running tests from the company: hht.local

    Commencement of the trial: LocatorCheck

    ... hht.local passed test LocatorCheck

    Commencement of the trial: cross-site

    ... hht.local passed test intersite

    Hello

    Your Question is beyond the scope of this community.

    I suggest that repost you your question in the Forums of SBS.

    https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

    "Windows Small Business Server 2011 Essentials online help"

    https://msdn.Microsoft.com/en-us/library/home-client.aspx

    See you soon.

  • There is no such thing as a hard drive? g series

    Hi my laptop (hp pavilion 750g, memory 6 g series) has been reset its self and then a black screen saying there is no hard drive, so it won't let me on the pc, an idea please?

    Hello

    Please try these steps can help you solve the problem.

    (1) once the unit is powered Dungeon by tapping the key F10 to go to Diagnostics and check if the disk is detect if yes please run the test and if works very well. Hard drive incase is not detect Please reinsert the hard drive from the back side off the laptop computer. Incase you have the same problem. Please check the warranty status and get replace it by car please call HP technical support for the same.

  • There is no such thing as ReadyBoost on Services

    I just learn about ReadyBoost and you want to use it, but it is not on my list of Services (Local).  In alphabetical order, he goes from 'Quality Windows Audio Video Experience' to "Remote Access Auto Connection Manager".  It simply isn't there.  I have a system Dell XPS 7 years under Windows 7 Home Premium, Service Pack 1.  Is there a place I can download ReadyBoost outwardly into my Services menu so I can use it or any other means by which I can access?  Just to be clear: this isn't about activation or deactivation, find AutoPlay, etc..  (I already read all the messages.)  It comes from not NOT the HAVE AT ALL!  Someone please help!  Thank you very much in advance.

    Jeff

    Hello

    ReadyBoost in Windows 7 supports 8 drives and a total of 256 GB. For each device - the
    device must have an access time of 1ms or less. The device must be capable of 2.5 MB/s
    read speeds for 4 KB random reads uniformly over the whole device and 1.75 MB/s
    Write speed for 512 KB random writings spread evenly on the unit. On a FAT32 device
    the cache is limited to 4 GB and on an NTFS device, the cache is limited to 32 GB (these are on)
    a device).

    Understand the ReadyBoost and the question of whether it will Speed Up your system
    http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

    More information that might help:

    ReadyBoost
    http://www.vista4beginners.com/ReadyBoost

    What is ReadyBoost
    http://www.winvistatips.com/ReadyBoost-T25.html
    Explore the features: Windows ReadyBoost
    http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

    Understand the ReadyBoost and the question of whether it will Speed Up your system
    http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

    DON'T GO OUT AND JUST BUY A READER WHO CLAIMS THAT IT IS READY - READYBOOST
    many of them are or stretching at least the truth. Look at the sides of the player below and buy
    a you know is FAST.

    Don't forget that the readyboost max cache is 4 GB Vista and 256 GB Windows 7. If your device
    is more than you can use it for storage. And you need a fast reader.

    ReadyBoost - list of speed Flash memory
    http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

    How to find the index of ReadyBoost speed
    http://www.techcrater.com/2007/04/06/how-to-find-ReadyBoost-speed-rating/

    Speed tests USB Flash Drive - any size car - link to the utility USBDeview
    http://usbspeed.NirSoft.NET/

    Publish a speed test of your USB - also a link to the utility USBDeview flash drive
    http://usbspeed.NirSoft.NET/publish_usb_flash_drive_speed.html

    Keep an eye on ReadyBoost with Windows 7 performance monitor
    http://blogs.TechRepublic.com.com/window-on-Windows/?p=2257

    Monitoring of ReadyBoost on Windows 7
    http://blogs.msdn.com/b/saveenr/archive/2009/05/02/monitoring-ReadyBoost-on-Windows-7.aspx

    Here is a report from a user with a RB 15Gig and it seems to work.
    http://jasonkneen.blogspot.com/2009/01/Windows-7-ReadyBoost-andLow-CPU-usage.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for

  • Yahoo has hijacked my browser

    I was somehow a bug that requires Yahoo intermittently to be my browser (in Chrome). I have reset the preferences, but it still appears like Yahoo a good part of the time. Any suggestions?

  • Use of root for the system volume is 95%, var/ftp uses all

    Hello I have a ReadNas 102 and lately I have these error messages using the root of the system volume is 95%. After checking the files/var, I noticed that desired used all available space. I had FTP enabled for some files and it seems that the conten

  • RTD &amp; Thermocouple sensors Simulation

    I am very new in VeriStand, and I would like to ask you what is the best way to implement simulation of VeriStand sensors. I should implement simulation of RTD and Thermocouple VeriStand probes. Problem with temperature sensors are mathematical equat

  • L0Q15UA #ABA: windows 8.1 to Windows 10 for Windows 7 for HP-15f215x

    I need help very quickly to my computer. I went through Windows 8.1 which was garbage up to 10 Windows which was even worse than Windows 7, which was the last thing that Microsoft made good. F unction keys do not work properly, I can't set my brightn

  • HP SLATE 7 LIGHTS...!

    Hello I tried to load my slate with usb cable girls when an error code which unfortunately I did not. and, in doing so, slate wil not turn on, I have held the button down for 10-20 10-30 seconds still nothing. Here are the details of the slate. Slate