Envy HP DV6-7375ez subwoofer does not work.

Similar Questions

• Qosmio F50-126 - Subwoofer does not work in Windows 7

  My subwoofer does not work in Windows 7.
  I installed the audio driver Dolby Digital... Basically controls the bass.

  That didn't activate it because I don't think the pulse of air, that I used to get under Vista. What driver am I missin?

  I don't have this model laptop but it will be interesting to know if you have that you compared the sound settings in Vista and Win7?
  Can you change anything to make box works properly?

  AFAIK there is no special driver for subwoofer features.

• Pavilion dv6 Validity Sensor does not work

  Hello..

  I reinstalled my Pavilion dv6-3300se, reinstall all drivers. But there is a problem. Validity sensor does not work and SimplePass Identity software is not found, even if I can find (DDK validity sensors) (default programs). I reinstalled it milion times but no use of it.

  Althouth I downloaded the latest version from the support page of the drivers on the HP website for my HP Pavilion dv6-3300se, validity sensor no longer works

  NEED HELP FAST

  Hello

  An option to try and install the latest version of SimplePass on the link below.

  http://www.EgisTec.com/websitedownload/patch/BioExcess/RELEASE7.1BUILD5.9%20BIOEXCESS7.1B5.0-HP.zip

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip , which can be used to open it so that you can run the installer - just click with the right button on the zipped file, select 7 - Zip, select extract files and click OK. Setup for SimplePass located in the newly extracted folder.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Envy 15 J003-tx: Webcam does not work properly

  My laptop webcam does not work correctly. It worked correctly and comfortably at the time where I bought the laptop recently.  But now, the hd quality missed thanks to a certain period. I have tried several methods until this. I thought the cyberlink you cam affect only indirectly & I uninstall & began to use the camera to windows. But it does make a difference. The photos are very dark such as silouhgts can only be seen. In my view, there is a vulnerability with some drivers or settings. But I can not diaognase that. What should I do?

  Hi @Gumindu,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j003tx and questions with the WebCam works not properly. Here is a document on WebCam troubleshooting.

  I would just start the section marked the Webcam image quality problems.

  Please let me know how it goes.

  Thank you.

• HP Envy 23: HDMI in button does not work in Windows 10

  After the upgrade to Windows 10, the button used to display HDMI no longer works on my HP Envy 23

  I had this same problem, except on the 27xt, which is the version 27 "the envy of HP TouchSmart. It is same as the 23 '' only bigger. I called HP who told me to call Microsoft, which, after an hour of Remote Desktop new installation graphic drivers and who does not, told me to call HP.
  
  So, I googled the problem and found this thread on this forum and I am so glad that I did. Hpuser30 is quite right, except that I found a method even easier for fixing.
  
  I went to my local BestBuy store which sells version 23 "and I plugged a flash drive, I brought home, in the USB 3.0 port on the side of the screen. Then I went on the c:\ drive and found their SWSETUP folder, and I "copied" the entire folder on my flash drive. Their machine works perfectly in Windows 10, so I felt confident that this could work. I went home and opened the SWSETUP folder on my computer and I tried MyHPDisplayOSD and I found the folder named the same thing. Inside this folder is a file called HP_My_Display_2.08.020_Setup.exe.
  
  I tried to launch the file but it said I couldn't, because I already had a newer version. That was the problem in the first place. Microsoft or HP had updated the driver to one that is no longer recognize the HDMI port or button.
  
  And I went to control panel configuration then programs and I uninstalled my HP device, requiring a reboot. Then I installed the Setup file on the Flash drive, I got the computer to BeatBuy. I didn't even have to reboot. I just pressed the button HDMI IN and it worked perfectly, the way it is supposed to.
  
  The version store is 23 "and mine is a 27". The store had 10 Windows Home and I have Windows 10 Pro, but the HP_My_Display_2.08.020_Setup.exe works on both.
  
  So, it isn't the graphics driver and is not the button or port, is this HP My Display driver. The solution is really as simple as that. Now, I have to see if Microsoft or HP update again and it mess... Once again. If they do, at least I know how to fix it.

• HP ENVY 15-k203tx: brightness keys does not work after the upgrade to windows 10

  Hello.

  I am using HP ENVY 15-k203tx and I have NVIDIA GeForce GTX 850 M
  I recently upgraded the operating system of windows 8.1 to windows 10
  Brightness shortcut keys do not work
  
  All the drivers are up to date.
  
  PnP monitor is also activated. What should I do?

  

  Hello

  You laptop has Intel/Nvidia switchable graphics and search RTA the screenshot, it does not resemble the driver Intel is installed.

  Try the following.

  Download driver Intel HD Graphics on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72810.exe

  Once complete, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72043.exe

  When it's over, don't reboot not the laptop that you are prompted, rather open your download folder, right-click on the Intel HD Graphics package and select "Run as Administrator" to launch the installation.

  Once this done, reboot the laptop and let Windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Envy 15: Airplane Mode button does not work after update of Windows 10

  My airplane on my HP envy mode button will not work after the upgrade to Windows 8.1 for Windows 10. I can turn on and off airplane Mode but not the button. Grateful for the help

  Hello:

  The only suggestion I can offer would be to see if installing the W10 wireless button driver solves the problem.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_150986_1&swEnvOid=4192

• HP envy 15-j067cl Simple Pass does not work

  Just bought Envy 15-j067cl yesterday with the fingerprint reader, which I've never used it before.  I did all the updates of Windows 8 and then upgraded to level to Windows 8.1.  I uninstalled Norton, using the removal tool, because I have a current subscription for other security software.  I tried to find a way to implement the Simple collar, which is what I understand how to set it to use my fingerprints.  I was unable to put in place.  I checked for Validity Sensor Device Manager and saw the yellow exclamation with this message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "

  I checked this site, saw a suggestion for drivers of HP recovery, so I did it and now the validity sensor does not show in the Device Manager.  It shows only as "unknown device - another device."  How can I fix it?

  Hello

  First, if you haven't already done so, install the driver from Chipset 8.1 on the following link.

  Chipset Driver - Windows 8.1

  When this has completed, restart the laptop.

  Then see if you can install the following Validity Sensor driver.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63418.exe

  Kind regards

  DP - K

• HP envy dv7 notebook pc keyboard does not work

  I tried to restart the computer so that undo the battery. I even tried to do a system restore and nothing is that the keyboard works. The touchpad does not either unless you plug a mouse into the usb port. I have to use the on-screen keyboard to type the password and then it disappears. Please help it is very frustrating...

  Thank you

  Hello

  Maybe it's a hardware problem, but it is always worth trying the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Tap away at the button esc you start the laptop to see if it will launch the Start Menu.  If this is the case, select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• Hi, my fingerprint sensor fingerprint hp dv6 6119 m does not work after I formatted it. Please help me

  I formatted my laptop and glass WIN 7 ultimate 64-bit and after it downloaded all the drivers from the hp site, but still does not. Also my I can not find the drivers for PCI devices. Please help me

  For the Fingerprinter:

  Pilot installs the FIRST:

  Validity sensor sp53369 V4.3.205.0 driver

  Then install the SimplePass software to interface with the user and to control the password database:

  HP SimplePass sp54680 V5.3.1.7

  I have not found your software SimplePass to your Web page - V5.3.1.7 should work OK.  If this isn't the case, then there is a more recent version of AuthenTec, that should work, which, in fact, works on almost all platforms of HP laptop that runs a compatible driver (and you do not have a compatible driver).

  You need to restart / reboot the computer after installing the software of SimplePass be sure to connect everything together.  In fact, whenever you make a change to this software, think seriously about restart - the database is notoriously difficult, and like a reboot.

• Pavilion dv6-2170eo: UEFI does not work on the Pavilion dv6-2170eo

  I updated the BIOS on my Pavilion dv6-2170eo of the e.17 release (I think) for F.1CA, the last of them. I have installed Windows 8.1.

  As there was no partition HP_TOOLS, I could not use the BIOS Setup. I created a HP_TOOLS partition and installed the HP System Diagnostics UEFI, sp52093.exe, but I can't always run the tools of diagnosis or the configuration of the BIOS. When I press ESC, F2 or F10 when booting the computer locks.

  If there is no other solution, I would like to go back to an older version of BIOS, without EFI, because it worked well before. Where can I find such a version?

  Forget it. I misunderstood the problem.

• HP ENVY x 360-15-w107ne: Hp envy x 360 light mute does not work

  So I just bought this hp envy x 360 yesterday and when I press the button mute that light does

  Its strange because in my older hp laptop, it was a light that appears when you press it.

  There is a place where the lignt should appear next to the button but it would light up.

  Please help me, thanks

  Hello

  Try the following.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72002.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71883.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Envy 15 j111tx: fingerprint sensor does not work

  So I have a HP Envy 15 j111tx.

  I have Windows 10 (64-bit) installed on my computer,

  I want to login my computer by using the fingerprint reader, but it won't work.

  I will drag my finger and it won't even turn on. I don't know what to do and I don't want to do something to make things worse.

  Help, please!
  
  User HP Envy

  Please explain the problem in detail. You get any message, of fingerprints of the work of connection in applications, etc.

  Mean while, download and install the latest drivers and software:

  http://support.HP.com/us-en/drivers/

• HP Pavilion dv6-6154nr: cpu does not work

  Hi all! Recently, I cleaned my cooler fans that my laptop had a sound strong. When I reassembled all the pieces, I that I had discovered this comp. is not the scene. The screen is black and the capslock flashes once preiodically. I discovered that can be a CPU problem. I tried the 'dry power up' method, and it did not help. If someone in front of the same problem, please could you write your solution or maybe someone knows what to do? Thanks in advance.

  Ok.

  If it worked before you took it apart, it means dismantling to see what you missed when assembling it.  You may need to have someone with more experience to take a peek. This usually means a shop or HP.

• After formatting my computer pavilion laptop dv6 2171ee wifi does not work

  as what I said in the topic

  the wifi doesn't work do not

  I did some research but I couldn't find the right driver

  This my Fri

  PCI\VEN_8086 & DEV_4239 & SUBSYS_13118086 & REV_35

  any help please?

  Hello

  The support site shows nothing for reader to Intel, which means machine you need to pick up automatically:

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01973748&lang=en&cc=us&TaskID=101&prodSeriesId=4041735&prodTypeId=321957

  Anyway, you can use the following link to download the driver for your machine:

  http://www.Intel.com/p/en_US/support/highlights/wireless/can-6200

  Kind regards.