envy j120us usb 2.0 does not?

Similar Questions

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• USB 3.0 does not work on HP Pavilion 23 g010

  USB 3.0 does not work on HP Pavilion 23 g010. Can not find the driver from HP site that works. Can anyone help please because it is a new computer? Windows 8 is installed, but owner downgraded to Windows 7. I tried the drivers that are supposed to work and the said error box "this computer does not meet the minimum requirements for installing this software"... don't know what to do but would appreciate greatly any input...

  Hello:

  Your model has an AMD chipset and processor.  Therefore, the Intel chipset driver will not work.

  First, install the AMD chipset driver and restart.

  You want to download the 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If that does not install the USB 3.0 drivers (see the file they are included), then download and install both of these drivers and USB 3.0 will work for sure in this way.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If there is any other drivers you need for this model, please let me know.

• Is there a download from Microsoft which will create a bootable usb media that does not have the drivers?

  Original title: A bootable Windows 7 media

  I work on a Lenovo 2-in-1 with Windows 7 (for games) and 10 (for a normal use) Windows to dual-boot. I created a USB stick with Windows 7 Pro (64 bit) of a legitimate Windows 7 Pro disc. The computer starts on the usb device and plays normally, however, one of the steps asks a driver for cd/dvd and this 2-in-1 (Lenovo Flex 3) doesn't have a built-in CD/DVD. All other drivers are located in a folder system. My question is, given my key Windows 7 can I create a new bootable media that does not demand drivers? Is there a download from Microsoft which will create a bootable usb media that does not have the drivers? I know that I can reinstall the drivers manually after the installation.

  Thank you

  Matt Armshaw

  Windows 7 or Windows 10 come preinstalled?

  If you install Windows 7 on a system that is preinstalled with Windows 10, you must do the following before:

  -Disable the secure boot UEFI

  -Disable the quick start

  -L' install created media can be corrupted.

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  I suggest that you try to create another bootable copy.

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Envy 23: HDMI in button does not work in Windows 10

  After the upgrade to Windows 10, the button used to display HDMI no longer works on my HP Envy 23

  I had this same problem, except on the 27xt, which is the version 27 "the envy of HP TouchSmart. It is same as the 23 '' only bigger. I called HP who told me to call Microsoft, which, after an hour of Remote Desktop new installation graphic drivers and who does not, told me to call HP.
  
  So, I googled the problem and found this thread on this forum and I am so glad that I did. Hpuser30 is quite right, except that I found a method even easier for fixing.
  
  I went to my local BestBuy store which sells version 23 "and I plugged a flash drive, I brought home, in the USB 3.0 port on the side of the screen. Then I went on the c:\ drive and found their SWSETUP folder, and I "copied" the entire folder on my flash drive. Their machine works perfectly in Windows 10, so I felt confident that this could work. I went home and opened the SWSETUP folder on my computer and I tried MyHPDisplayOSD and I found the folder named the same thing. Inside this folder is a file called HP_My_Display_2.08.020_Setup.exe.
  
  I tried to launch the file but it said I couldn't, because I already had a newer version. That was the problem in the first place. Microsoft or HP had updated the driver to one that is no longer recognize the HDMI port or button.
  
  And I went to control panel configuration then programs and I uninstalled my HP device, requiring a reboot. Then I installed the Setup file on the Flash drive, I got the computer to BeatBuy. I didn't even have to reboot. I just pressed the button HDMI IN and it worked perfectly, the way it is supposed to.
  
  The version store is 23 "and mine is a 27". The store had 10 Windows Home and I have Windows 10 Pro, but the HP_My_Display_2.08.020_Setup.exe works on both.
  
  So, it isn't the graphics driver and is not the button or port, is this HP My Display driver. The solution is really as simple as that. Now, I have to see if Microsoft or HP update again and it mess... Once again. If they do, at least I know how to fix it.

• USB 2.0 does not work in bootcamp Windows 10

  Hello

  I try to use my USB 2.0 USB drive on my MBP 13.3 "in bootcamp Windows 10 and it does not appear in windows Explorer. The USB key is displayed in the device however Manager. I tried my hard drive that is USB 3.0 and it works fine, but the USB does not work. I have tried many different solutions and none seem to work including physical relocation and replacing the USB name i.e. H: U:. In disk management, the device is there but says "no media" below.

  Someone at - it suggestions as to how I can get the USB appear in Windows Explorer and access the files?

  Bravo to all the answers in advance.

  the device is considered that the format is not. In some cases shaped on the Mac in Fat32 or ExFat is not readable under Windows. Reformat the Windows Fat32 or ExFat Device Manager device, it will destroy the data and mount the drive. In turn the unit may become unusable which can occur over time.

• The right side and express USB card reader does not work

  Hello

  The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

  Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

  I can´t find the card express under system reports reader.

  I ran a test for diagnosis of Apple without any problem.

  I have reset the SMC & LANDAU.

  I reinstalled the operating system without success.

  Anyone who knows how to fix this?

  MacBook Pro with OS X El Capitan 10.11.5, Retina display

  Can someone help me here, please!

  Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• Gigabyt USB adapter works does not win10

  gigabyt USB adapter does not not qin 10 / 64

  HP has not posted any drivers for it. It appears in Device Manager? All other usb devices work?

• Portege R500 - keyboard USB Legacy support does not work

  I have a Portege R500-124

  I use it to dock in the office and the lid is closed, so I need to enter a password for DriveCrypt and generally control the boot/BIOS from a USB keyboard. But no matter what I set the setting that is inherited from the USB in the BIOS, the USB keyboard does not work. I tried the keyboard connected directly to the R500 when undocked and it's all the same. I also tried BIOS 1.6 and that's all the same.

  USB keys are working and I can boot from them, but no work of measures (for example, F12 to choose the BOOT device) keyboard - the R500 doesn't seem to have the functional USB keyboard support until an operating system (Windows or Linux) has started.

  Any ideas?

  Ian

  > .the R500 does not appear to be the functional USB keyboard support until an operating system (Windows or Linux) has started.

  I can't confirm this, but I'm afraid you're right about that.

• Tecra 8000 - hub USB 2.0 does not

  I need a help. IA´ve had Hi - speed USB 2.0 Notebook card
  22932 http://catalog.Belkin.com/IWCatProductPage.process?Merchant_Id=&Product_Id=1

  but still, I installed all the drivers oryginal CD it does not, as a USB 2.0 but everything also USB 1
  I have Tecra 8000 with 366 MgH processor, 6 GHG's hard drive, I use Windows XP Professional with SP2.
  Anyone know what could be the problem?
  Thank you

  Hello Mad

  In my view, this question must be sent to Belkin. AFAIK for maximum performance, computer system, peripheral and software must all support Hi-Speed USB.

  On this map, I have gift logo see Hi-Speed t.

• 16GB USB flash drive does not not on Satellite L300-11F

  Hello

  I have a laptop Toshiba Satellite L300-11F. It comes with 2 USB ports.
  I have a pendrive plus 1 GB and all recently bought a Maxell 16 GB USB key.
  The USB works flawlessly at work, desktop pc, but doesn't seem to work with the laptop.

  I managed to use that only once since the USB port of the laptop simply does not recognize.
  I can tell that the Red led does not Flash and the Flash DRIVE is not accessible.
  I tried to use the hub USB Toshiba provided, no chance either :(

  2 USB ports are ok I use mouse, digital camera with her.
  Is the 16 GB USB key, it works perfectly with other machines. * desktop pcs *.

  I'm missing a few USB drivers or what is the problem?
  Please help I need to be able to use the device on the laptop too.

  Thank you!

  Blaze

  Can you use a Flash DRIVE with a lower capacity on the two USB ports?

• HP Envy 27 p075na: card reader does not

  Comes to take delivery of my AIO, everything is fine except the player integrated memory card does not work.

  Insertion of a card causes no change in the user interface and nothing appears in Device Manager.

  Not good for a new PC.

  Hi all

  Spent an hour with Dominic of online support, but no joy.

  He recommended a system restore, but it doesn't seem to be a factory prepared the restore partition - that is a problem.

  In any case, while preparing to create USB recovery media, I tried the memory card in my laptop works who reported that the card should be formatted so that windows could not format. Strange that both my old memory USB and Lenovo card reader work very well.

  Found a new unused card and this market!

  Seems there is something strange on the two cards I've tried before, perhaps because of the camera their formatting first?

  Thanks for the support, off the coast to create a recovery media now...

• Toshiba Store Alu 3.5 "1 TB external USB HARD drive does not

  I turned on my laptop with my hard drive is connected.
  It flashes blue and everything and the computer recognizes that there is a usb device it but it freezes Windows Explorer.

  When I tried to click the hard drive icon, it says the device is not accessible.
  It does not unusual noises high expectations or clicks. I tried to unplug and every bit nothing helps.

  I read somewhere else that it can be a power supply problem? (a few days ago I had a really small power cut which lasted a second...)
  I really hope that this isn't a drive failure hard because I have 250 gb of music in there! Should I send in repairs?
  If so, my data would be deleted? I had this for only less than a month.

  Thanks in advance.

  > It seems to work on other computers without problem, but on mine, it is not
  In such cases, it s not a problem of disk HARD but eventually its computer number you and, eventually, the OS does not contains some drivers / extract, etc. eventually the operating system must be updated

  Welcome them

• External USB HDD cable does not match of Satellite A200 USB ports

  I bought a new Notebook from Toshiba A200 Satellite and a 500 GB Maxtor One Touch 4 500 GB hard drive.
  The end of the USB cable to the HARD drive does not match one of the ports on the Toshiba.

  Can I get an adapter, or try to find a rope?
  HARD drive uses USB 1.1, 2.0 or Firewire port.

  Thank you!

  What?

  Sorry, but I don't believe that.
  The Satellite A200 supports USB 2.0 ports Commons and it should be possible to connect a normal USB cable to the laptop!

  Are you sure you are using the right cable to 100%?

  It should looks like this:

  [USB 2.0 cable | http://upload.wikimedia.org/wikipedia/commons/e/e6/USB_TypeA_Plug.JPG]

  and these are typical USB ports:

  [USB 2.0 port | http://upload.wikimedia.org/wikipedia/en/8/84/USB_Connector.jpg]