Envy of HP dv6 7252er: laptop keyboard doesn't work anymore, any usb in the BIOS menu and start. In Windows, it works

Similar Questions

• HP laptop keyboard doesn't work does not correctly

  Friends I have a hp laptop, it's keyboard does not work properly when I press 'G' slap 'C' and other buttons have the same problem.

  If anyone has a solution please answer.
  Thanks in advance

  Hello Rahul,

  Please answer the questions below to better understand the issue

  1. What is the exact make and model of the HP laptop?

  2 from when is the persistence of the question?

  3. don't you make changes to your computer before the show?

  4. have you installed all the latest drivers associated with your computer?

  In the meantime, go to the icon start, right-click > select Control Panel > (set as small icon view) > troubleshooting > material and audio > hardware and devices > click advanced options and tick the apply checkbox automatically repairs > next.

  Please get back to us with the necessary details so we can solve your problem as soon as possible.

• my laptop keyboard is not working. His pavilion G6 2228TU model please help me.

  my laptop keyboard is not working. His pavilion G6 2228TU model please help me.

  Hello

  This could be a hardware problem, but it is always worth trying the following.

  Open windows control panel, open Device Manager, expand keyboards, "Standard PS/2 Keyboard" right click and select uninstall.

  When you are finished, stop the laptop - if you're running Windows 8 or 8.1, do it by holding down the button SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Envy 13 laptop: Bluetooth doesn't work is not on the HP Envy 13 laptop

  Good afternoon

  I recently bought a laptop from HP Envy 13-d004a and could not get working Bluetooth.

  Without wireless/bluetooth adapter is an Intel Dual Band Wireless-AC 7265.

  Bluetooth is not listed in the page menu settings/Windows device.

  There is no Bluetooth device listed in Device Manager.

  There is an unknown USB device (device descriptor request failed) listed under Bus USB controllers I think it is perhaps related to the problem. The State of this poster features 43 code.

  So far, I tried to uninstall and reinstall the USB devices and update drivers for USB devices. However, the USB device is unknown, with a warning on the icon symbol.

  I also downloaded the latest Intel Bluetooth driver update utility. When I run the installer, or the repair, I get the message

  "Intel Bluetooth Service (ibtsiva.exe) could not be installed. Make sure you have sufficient privileges. ». I am connected with administrator privileges when I run the installation program.

  So far all my attempts to solve the problem of Bluetooth failed, would be more appreciated all the help I get.

  Thank you

  John

  Bluetooth problem has now been resolved on my HP Envy 13-d004na notebook.

  Tonight a Synaptics SMBus driver has been downloaded and installed via Windows Update.

  After the installation of this driver, I restarted the computer.

  After restarting Bluetooth appeared in Device Manager and peripheral USB unknown displayed previously had disappeared from the Device Manager. I tested Bluetooth connectivity and am now able to pair with my Bluetooth mouse.

  Surprised, but very happy that the problem has been resolved and that the laptop now seems to be fully functional.

  Thanks again for your help.

  John

• My keyboard doesn't work sometimes

  My buttons on keyboard Asus Aspire E5 - 571 G-39V3 (E, 3, 4) stops working sometimes and sometimes it buttons doesn't work.

  I have to use the on-screen keyboard. I bought this computer 3 months ago. I tried to clean the buttons but it does not work.

  Please help me!

  In this case, check if help to reinstall keyboard drivers. To do this, follow the steps below:
  1. press on the 'Windows key' + 'R' to open the run window.
  2. in the run window, type Control Panel and press the Enter"" key.
  3. go to "Keyboard" and then click on the tab "hardware".
  4. click on "Properties" and go to the tab "driver".
  5. click on "Uninstall" to uninstall the drivers for the keyboard.
  6. restart your computer and Windows will automatically load the drivers for the keyboard.

  If the problem persists even after reinstalling drivers, it is recommended to take your laptop to the nearest Acer service center as it is under warranty. To do this, the following link can be useful:
  http://us.Acer.com/AC/en/us/content/service

  Hope this will help you.

• Re: Satellite A50 - keyboard doesn't work after sleep

  I have a problem with my laptop.
  When you load windows xp keyboard does not work.
  Keyboard works again if you put it to sleep the laptop and then you reboot.

  What is the problem? Help me please and thanks in advance.

  I have never heard of this issue, but have you tried an external keyboard? Check it!

  What's your Windows up-to-date with all Service Packs and patches?
  I doubt that s a hardware issue and in the worst case, you must reinstall.

• Built in laptop keyboard suddenly stopped working the Dell Studio 15

  Dell studio 15 laptop
  Vista Home premium 64-bit
  Keyboard suddenly stopped working, using the screen keyboard now.  All buttons unresponsive.  No virus or malware found by updated AVG scan.  The touch pad or external mouse, both work.  I have no external keyboard.  System Restore does not work.  The driver is up to date and its status is "work prperly.
  Help, please.

  Is it still under warranty, if so contact Dell

• Belkin YourType wireless keyboard doesn't work does not correctly

  Hi guys

  I bought my pad paired Belkin Bluetooth in an Apple store, more than two years ago and once I got it, it worked exactly what I needed to enable keyboard shortcuts in Steinberg Cubase, DAW software. Now, I have all sorts of questions. First of all, when I press the buttons as the search for example, key it used to open featured alongside default Mac OSX of CMD + SPACE shortcut. Now, it does nothing except when the Finder Windows is activated it will point to the option to 'find' under the 'View' menu

  What I did is non-matched unit of my 2011 iMac 21.5 "and removed battery and reinstalled them. Oddly, if the Mac matches the keyboard to him without needing a key to past or pair? Is there a way I can remove it entirely from the system?

  Some please help me out with this keypad please.

  Any help appreciated

  Will be

  Try going to system preferences/Bluetooth and place your cursor on the keyboard input. An X should appear on the right side. Until it clicks.

• [W.XP] Keyboard doesn't work when you reboot (and) his needless failure mode

  o: when its in safe mode my entire keyboard did not work):

  Hello

  1. what type of keyboard you use? What is a usb keyboard or a normal keyboard of 5 pins?
  2. don't you make changes to the configuration of the BIOS?

  If you are using a usb keyboard, you can t o should check if the usb keyboard is enabled in the BIOS. You can contact the computer manufacturer to verify these settings.
  Note:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Keyboard doesn't work on ESXi 5 host

  I am very new to the family of VMware, but I have a problem I hope you can help with.  I bought a Dell T410 server to use as a test host VMware.  I have several virtual machines on it.  However, all of a sudden, the keyboard has stopped working once the kernal load.  Everything works fine in the bios, and if I use a bootable operating system, it works fine as well.  I tried all the usual steps - different keyboard, another USB port...  Help!

  Thank you

  Brian

  Had the same problem on a server Dell T710 with ESXi 5.0, but after 4 hours of troubleshooting, lots of coffee and found this solution!

  I turn on all the USB ports on my computer to USB-passthou. It seams that vmware it just maps up to your guest and no other usbport are available on the console. Just uncheck some in vSphere Client and rebooted the host port. Simple and logical reason...

  See the attached files.

• Desktop HP ENVY 700: problems with the boot from usb in the bios

  Hi I'm trying to boot from usb on a desktop HP ENVY 700. I don't know the serial number now.

  I followed the instructions and have produced a bootable USB and I checked this on a work dell computer where there is an option for me to boot from my USB if I so wish, but on my HP ENVY any options choose it does not appear with my USB in question and when I try to change the boot sequence making sure the usb/floppy and drive hard usb is above the rest of the sequencers starting it always starts just to the top as usual to my windows boot 10. I've disabled secure boot and used the boot of the legacy and it still does not work.

  I went through all the options I can that seem to be logic and it just does not work. I don't understand and I have to start using a usb key that I use the operating system can be very dangerous in a real environment, so it can not be downloaded to the hard drive.

  I need immediate help, this becomes quite frustrating now that it should be simple to do, but HP is not the way to simplisitic to do.

  Please if someone could point me in the right direction I would be so appreciative ideally if I could have a ride on the way to do

  I need this to work because I can't afford to buy new systems and its for my studies so its imperative

  Your PC has a motherboard of Memphis and happens to have a UEFI BIOS and the hard drive of the GPT format.

  You can check the type of hard disk online order volume by using the DiskPart utility.

  

  Create a flashdrive bootable UEFI with RUFUS.

  https://Rufus.AKEO.IE/

  Plug it into an available usb port before you press the power button. Near the powr button and immediately start to tap the F9 key to enter the boot from the sources menu. Select the Flash drive under the UEFI Boot sources. Let the boot process. If you have created the key correctly, it should start.

• HP Envy 4500: Print jobs disappear from the print queue and not print (Windows 7).

  I just bought a HP Envy 4500 printer,

  When you attempt to print from a PC with windows 7 OS home pro (64-bit), the print job appears in the queue and then disappears, but the printer does not print anything.

  Everything else seems to work very well know

  • The printer prints the internal test page
  • The printer does print when you use iPad2
  • The printer does print when you use ePrint
  • The PC recognizes and communicates with the printer (tried with USB connections and wireless)
  • Analysis feature works very well - when initiated from the PC and printer

  I tried

  • uninstalling and reinstalling the software (several times using software from different sources)
  • restart the printer queue service
  • Disabling the firewall
  • running printing HP and doctor Scan
  • following the instructions described here (the question is the same but the different operating system):

  Print jobs disappear from the print queue and print (Windows 8)

  • combinations of all of the above

  Absolutely no joy in any of them, and in spite of more than 2 hours of research on Google and forums search I can't find a solution.

  HP... can you give me a solution or is that goes back to the shop?

  Well I finally worked on the fix myself by trial and error.  I changed the security settings for 'All' and 'Creator owner' to 'Print' and "Administer Documents".  Why on earth they were not automatically allowed as part of the installation, I couldn't really say.

  Hope this helps someone else with a similar problem.

• Envy 17-j130ea: HP Envy 17-j130ea do not have access to the BIOS recovery and black screen

  Hi people,

  The laptop was waking up alone, so I decided to try to update the BIOS. Bis error. The tool has been run on 64 Win10

  The HP tool left me with a black screen and after that I tried to hold the low win + B and the power to access the Bios recovery, but there is no nothing. Tone flashing, nothing.

  I don't know if creating a flash drive with the bios will help as I don't have admin rights in another machine to create the flash drive using HP tool.

  Any ideas? Flash player won't work if BIOS recovery is not pulled up?

  All ideas are welcome.

  See you soon

  Well, I managed to solve the problem overnight without having to wait three days for anyone to answer that after the end of the week, with the following steps:

  1. I had to create a USB key with the bios by using the executable auto HP. It did not help that for some reason any that you have to have the administrator rights on a windows machine. Why aren't files available as well in a simple zip file? It would have helped a lot! Please stop HP right now provide only Autorun... it only compliates things. It took me an extra day just because I couldn't access a machine windows with administrator rights to install the executable file.

  2 - Insert the memory stick with the bios in the dead computer.

  3 - Press the Win + B and press the power button. The machine didn't do any beep or noise that all the guides say. I just kept pressing the key B + Win until I saw a recovery of the Bios screen, finally. Without the memory following stick this same step has not shown, nor does the computer make a noise or show any display, just died.

  4 - wait for the update at the end.

  My Advisor. Do not update windows, it all messed up. It is very reliable to get the memory stick. Too many windows things can interfere in the process, just don't do it from Windows, or at least create the memory stick first while you still can.

• Dell XPS 8700 - failure of the keyboard when the bios boot (but not when Windows is loaded)

  My Dell XPS 8700 has 10 Windows and a Logitech Keyboard wireless, connected by USB. The keyboard works absolutely fine when Windows has loaded. I have the latest version of the bios, A11.

  However, when the computer is turned on and starts the bios start, it displays 'Keyboard Failure' on the screen for about half a second. When I try to go into the bios setup by pressing "F2" at the counter (I keep typing "F2" from the moment when I press the power button on the computer), there is no answer. The "keyboard failure" and inability to enter the bios setup seems to happen if I do a cold immediately after a stop start, a cold start after the computer is turned off for an extended period or a reboot.

  I tried to connect the wired keyboard original Dell one of the USB ports on the front of the unit (without disconnecting the wireless keyboard) with the same problem at the start of the bios.

  I encountered this problem on versions of bios A11 both A03. I know that in the past, although I don't remember when - I was able to enter the bios setup by pressing "F2".

  Any thoughts on how to solve this problem?

  You can try and reset the CMOS. It will return your settings to factory settings, but not the version. Usually, this erases these problems because CMOS stores data editable such as your wireless keyboard settings. BIOS stores the information about the basic material that is unchangable as your keyboard usb, mouse and other essential equipment. If you notice, when you just plugin any keyboard and mouse, its recognized at startup. Your needs software to run wireless device and that is stored in the CMOS.

  So once reset you the CMOS, you may need to then install the wireless software.

  Good luck.