ENVY of HP dv7 Notebook PC: HP ENVY dv7 Notebook PC can pass between the Intel and Nvidia graphics processors
I have a request when it runs I get an error as follows:
"Display driver stopped responding and has recovered display Intel graphics driver Excelerator for Windows 7 (R) driver stopped responding and has successfully recovered."
Is it possible to assign this application for Nvidia graphic card instead of 4000 GPU Intel. If yes how to do this assignment.
Thank you
Here's what I had to do to get the graphics Performance at a level that would allow the Surfcam CAM application traditional 2015 work correctly:
Envy of HP dv7 - 7373ca required parameters for 2015 Surfcam traditional
Right-click on it to office;
Select the Nvidia Control Panel
- Setting the parameters of the Image: use the settings of the 3D Image.
- Manage 3D settings: NVIDIA High Performance processor
- Physx Config set: GeForce 650 M Graphics
Select the graphic properties (it comes to GPU Intel HD 4000)
- Media: Preferred 3D Performance
- Power: Max Performance
Tags: Notebooks
Similar Questions
-
I've lost the last two digits of my valid key for xp pro sp2 and notebook, how do I get the key and support? where?
Hi Jonathan,.
Please go to the Microsoft Community Forums.After the description of the question, I understand that you have lost the last 2 digits of the product key.Let me go ahead and help you with the issue.Please answer these questions, which will help us to help you best.1. How did you get the product key?2. the operating system come preinstalled on the computer?I suggest you for the link and check if that helps:How to identify, locate, and replace a product keySee also:
I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further. -
Hello
I reinstalled once validity sensor driver and HP SImplepass before doing so in a particular order, that I don't remember and it works under the compatibility settings. I had to update my machine and I can't get the snesor to work
Can someone advise on the correct order of installation driver and pass simple and give advice on file names correct HP SP for both for a dv7 7332earunning win 8.1 64 bit.
Thank you
Bacl welcome to the Community Forum of HP.
See the following topics:
HP SimplePass upgrade instructions
Follow the procedure (Page 2 in writing):
Procedure - updated / (install HP SimplePass Re)
1. first driver
2 reset
3. the following software
4 reboot
NOTE:
- You probably want to use / stay with the 6 series / version 6.x HP SimplePass.
- Ignore references to series 8 HP SimplePass.
Click on the thumbs-up Kudos to say thank you!
And... Click on accept as Solution when my answer provides a fix or a workaround!
I am happy to provide assistance on behalf of HP. I do not work for HP.
-
I tried to change the sensitivity of the touchpad on my laptop, but it is still so delicate, that it drives me crazy. The other questions, I looked here in the forum of the community is not party to the machine or the utilities that I have.
I want to COMPLETELY DISABLE it and use a plug in mouse. Where is the option to disable the touchpad?
I uninstalled the driver for the TouchPad Symantic, but the touchpad still presents itself as a device of '' PS/2 Compatible Mouse. '' When I open the Properties dialog box of the mouse, on the driver tab, the button disable is grayed.
How can I COMPELTELY DISABLE the touchpad and just use a plug in mouse on laptop HP Envy 14 t?
@kiltinshire,
Thanks for posting back. As you know that there are several versions of HP laptops may be, most of the control functions are found in the user guide. If you don't find it there then you would go to the deactivation of material in windows. It is a microsoft.
Normally, you have 2 choices to turn off physically. First the touchpad has a little button at an angle according to the model. Use a function key, it will have a diagram of a square and a finger. These methods have been used for years to turn your touchpad.
Then is just google how to disable touchpad in windows 8. Here are some links that you may find useful that I found using this search.
How to activate and deactivate Touchpad on HP ENVY
Turn off the notebook computer Touchpad under Windows 8 / 7
How to disable the laptop touchpad in windows 8
Now if you try to find a way to permanently close off the touchpad so that it does not in fact once again you will have to dig into Windows Help for this. If Windows detects hardware at startup, it will, by default, try and load the driver of basis for it and most likely turn it on when you restart.
The only other way is to open your laptop and unplug the cable that goes from the touchpad to the motherboard, so this does not happen.
I hope this helps.
Thanks again for posting and have a great day.
-
HP Envy 17 L8L13AV: How can I change the hard drives in my desire to 17
So finally getting my new laptop for work, the first thing made disk image and drive cloned to 2 separate drives, 1 disk to hide for emergency use second drive an SSD to replace the 1 TB drive. Low and here is new HP Envy can not simply pull old (new) hunt and put new and install first as storage device that I was planning to do. Can someone please tell me if I can get out of the car and replace it with the SSD, I bought this laptop? I don't care even if I use the 1 TB it came with I want to the SSD in there. Before I even started looking for the reader. I really just instructions on how to pull the back panel or keyboard and put in the other drive. Please, any help would be appreciated. Yes, I have all the tools to do so.
Here is the Manual:
See Page 64. You must remove the top cover, but not the motherboard. This jeopardize the warranty but HP will not void the warranty if you do the upgrade successfully.
This series of videos will also be useful:
Assuming you did the clone properly, you should just be able to exchange the SSD instead of hard drive.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
laptop Envy 17 17-j034ca: can not detect the usb flash drives
Hi, I recently installed windows 7 64 bit on my computer laptop envy 17 17-j034ca. Then, I managed to install all the drivers but it still doesn't detect usb flash drives and I tried to install from the web site of HP and my config but it still does not work
Please help me
It's ok my sound suddenly computer detects the flash drives normally
-
Envy 17-j113el: where can I find the drivers for Win8 32-bit?
Hello
I force myself to use 32-bit win8, where I can find the 32-bit drivers?
Thank you
Hello:
You'll have to hope that the drivers from suppliers of equipment and other HP laptops sites work.
I looked at the specs of material for your model and offer you these suggestions...
Driver chipset... Install this first and then restart.
Graphics card:
Install the second driver and restart.
Then see if the GT 750 M driver directly from nVidia works...
http://www.nvidia.com/download/driverResults.aspx/73783/en-us
Audio: There is no driver audio beats for W8, 32-bit I know. See if it works well...
Ethernet: DL and install the driver first on the list.
Card reader: DL and install the driver first on the list.
Intel management engine interface:
Webcam:
3D driveguard:
If the audio driver from the support page and the driver of your PC does not work, then try this one. At least he should get the audio to work, but he won't beat improvements, I think.
-
HP Envy 1540T H8: How can I activate the AHCI?
I installed a new Pro 850 Samsung 1 TB SSD drive which replaced a Samsung 256 GB SSD. However, I am unable to get the computer to start with I select AHCI mode in the BIOS of the reader. I can only boot into RAID mode and magician then tells me to activate the AHCI for optimal performance.
The following system information is provided:
OS: Windows 8.1 64bits
Chipset: Intel (R) C600/X 79 series chipset controller LPC - 1 41
Storage controllers: Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller 12.8.2.1000
RAM: 32 GB
Does anyone have any suggestions on how to proceed? Thanks in advance for your help.
Mr President.
Thank you very much!. I tried to solve this problem for days. I had already installed a new copy of Windows 8.1, so I've been worreid I need to start over, but I do not have. All I had to do was follow you to start in safe mode. I then rebooted in UEFI, changed the RAID on AHCI and disabled Secure Boot. The system then finished the re-boot and is in AHCI mode. I have not lost all data on my three internal drives (1 SSD and 2 hard drives). For some reason, he did reformat a NAS attached, but I don't have something out there that was not saved.
I really apprecitae your help!
All the best,
John
-
the envy of 120 how can I change the size of the body text? Windxows 7
How can I change the size of the text in the body of the text?
Hi Bob,
Have you managed to solve the problem of size?
Can you estimate the level of ink in its entirety for each cartridge, by looking at the gauge of printer ink? See the Solution 5
If you place a text black and white document face down on the glass of the scanner of the printer, you are able to make a black and white photocopy? Is it black?
-
I just got my new PC and have problems with the touchpad. My old PC has allowed me to disable the touchpad by double-clicking it in the upper left corner. The news is not that. I tried to find a setting in Control Panel - devices and printers - mouse, but there isn't a way to disable. Help!
Scott
Hello
You see Synaptics tab? In the affirmative, please use this tab to disable the touchpad, if no, you must use the tab settings of the HP control area (for the newer machines). And in both cases, check the box "turn off internal...." 'and 'Apply'.
Kind regards.
-
HP ENVY 15 J051EA TS: broken bottom of the case and missing screws
Hi it screws my low wws lost business and because of this, the hinge is now oushing my case to open. I tried to get another from a different part of the laptopn screw, but it seems that small but which allows the screw stay connected to the case is broken. Long story short, I would need for a new substantive case and a replacement of the screw. Anyone know where I can get these parts?
Thank you.
Andreea
You are welcome
If you have selected your country and sought the part number, proceeded to purchase and that you are still not able to, I can only assume that the part is not currently available at HP in your area.
-
Pavilion dv7. Windows can't verify the Publisher of this driver. system restore
Pavilion dv7. Windows Vista Home Edition
The error message that desplays after the system recovery process, it is "Windows cannot verify the Publisher of this driver software".
I tried clicking on the button 'Install anyway', at this point, more than 5 times. The process does not move forward and I feel frustrated and turned off my computer.
I started but that you have not completed the process of system restore, so there is nothing usable on my computer in terms of operating system.
What should I do?
Thank you. By showing the work you've done to a representative at the Geek Squad, I was able to buy and install a new hard drive for my laptop.
I then used the recovery disks that were created shortly after that the laptop was purchased in 2009. Windows Vista is now on my computer.
-
HP Pavilion Notebook 17.3 ": cannot use the buttons and moving the mouse
Hello
I'm a pretty heavy gamer and I recently I brought a HP Pavilion Notebook with windows 10 on it, and I expect to play games on it
But the problem im getting is, if I hold one button, the mouse does not work, which, as you can tell, is unplayable.
Is there any solution to this? his v19.0.12.97 of Synaptics Pointing Device running
Thanks in advance
Hello
I tried the following on a machine not that different to yours and it seems to work.
First, download the Synaptics driver on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63417.exe
Disable your wireless card (should be f12).
Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.
When you are done, reboot the laptop.
When windows has reloaded, open your Downloads folder and launch the installer of Synaptics - when this is complete, restart the computer again.
Open the Synaptics settings panel, disable SmartSense, then check if the touchpad works now with a key on the keyboard is pressed.
If so, turn on your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.
https://support.Microsoft.com/en-GB/KB/3073930
Kind regards
DP - K
-
HP Pavilion Notebook - K8Z00AV: can I upgrade the RAM on my laptop HP Pavilion
Hello, I was wondering if it would be possible for me to update my RAM, he is currently at 8GB, I want to upgrade to 16 GB or whatever the max is.
Thank you!
If you already have a 8 GB 1600 MHZ RAM on your PC you just need to buy another 8 GB 1600 MHZ RAM, that should work
-
HP 15 f024 wm Notebook: How can I downgrade the bios on my laptop HP 15-024wm?
Hi, I just bought a laptop from HP 15 f024-wm. It runs 8.1 64-bit Windows. Intel Pentium 3520 N. The problem I have is that I've recently updated my bios to f.13 and now my keyboard skips letters. Everything was going well until I did this upgrade of bios, how can I downgrade to the original version? I tried the key windows + B thing and she does not see a black screen while my caps lock key blinks twice. It drives me crazy... If anyone can help me I would appreciate it a lot. Thank you!
Hi @vincentd1215 ,
Thank you for visiting the Forums HP's Support and welcome. I understand you want to restore the default values of the BIOS. You can restore the BIOS with this document by selecting the reload the default BIOS settings or rollback. Restore default BIOS is necessary, if it does not give you the possibility of restoration.
Hope this is what you need.
Thank you.
Maybe you are looking for
-
Satellite L300D - CD/DVD player is uninstalled
Hi guys,. I have a Satellite L300D. The DVD player has somehow been uninstalled, and I have no idea how the have reinstalled. I m not technical in the slightest so any help would be cool.
-
What version of the Visa Runtime executable files compiled in LabVIEW 7.1 require?
We have an old executable that was written in LabVIEW 7.1 and uses the serial port communication. We are licensed with LabVIEW 2010, however our company policy requies a lot of paperwork so he should recompile. The executable program has worked well
-
How can I retrieve forgotten password windows 7?
Hello, I need help! I forgot the password on Windows 7 and now I can't access my document, there are a lot of important materials in the computer, I need to do now, how can I remove or reset the password of windows 7? Acer laptop.
-
Cannot remove kvthost.exe infection
original title: kvthost.exe Under XP Home SP3 all updates on a Dell 4550, 2 GB ram, P4 3.06 Ghz, Nvidia 6800GS AGP, 120 Gb HD. I have a recurring problem with a file marked by Advanced SystemCare. The file is called kvthost.exe and is located in the
-
DeskJet 3510 will print offline immediately when Windows wireless
With my brand new HP DeskJet 3510 series, the wireless installation completed "successfully" on windows 7 x 64. However, the first attempt to print immediately-even a test page - sends the printer offline. It will not go online again. But it prints w