EOS 50 d, Flash problems

Similar Questions

• My canon eos 30 d flashes too powerfully and whiteing my photos can someone help

  Hi all

  When I take pictures my eos 30 d is too powerful for automatic photos I take and whiteing on the subject

  I looked in my manual and can't see the answer

  If the device worked properly, then started to overexpose in mode auto, most likely, you have changed some settings...

  Go to the menu, select and use 'all clear camera settings. You can also go into the custom functions menu, select and click 'Reset all custom functions'.

  As a last resort, you could do a "reboot" of the camera. It's a bit like rebooting a computer to clear incorrect instructions that are stuck in the memory.

  To do a reset, first turn off the camera, then remove all of the batteries, including the money bit "battery memory" which is in a drawer inside the main compartment. Turn on the camera and press the shutter button once. It fires without batteries, of course. But this drains any residual power in the circuit.

  Turn the power off, reinstall the batteries and turn it back on. Check the date and time. If you got a restart appropriate, they should be set to zero.

  If you do not have a proper restart, you can use the same procedure, but instead of pressing the shutter button just leave the battery for about an hour. This should allow any residual power to drain it and cause a complete reset, too.

  It can erase some of the settings you have made inadvertently, causing problems. Or it can erase a statement stuck in memory, string just as restarting a computer clears its memory and help it work better. (After all, devices digital photo is essentially the laptops. )

  You might also consider relocation (upgrade, if necessary) the camera firmware. Sometimes, it can be damaged and giving problems. If you go to the website of Canon and research for 30 days, in the software category and downloads you will find the latest version of the software for the camera and instructions on how to install it. Follow the instructions carefully. It is not difficult, but it must be done according to the instructions, or there is a risk of "bricking" of the camera.

  Finally, it could be a bad communication between the camera and lens. Some flashes use data of distance from the lens to help the force of the power of the flash. Remove the lens and clean the contacts. Usually the best way to proceed is to wipe the contacts Golden at the rear of the lens with a clean cloth which is slightly moistened with a few drops of isopropyl alcohol (rubbing cheap alcohol is fine). Just pay attention to leave the lens optics and do not touch the mirror inside the front of the camera or the screen right above the mirror.

  Also, you can check the pins 'spring' corresponding to the contacts on the lens to work correctly. Gently press on each spindle and watch it springs in place. Sometimes, these can be sticky, causing problems of communication between the camera and the lens.

  Factory default of compensation and/or reboot the camera that you will lose a few other settings you did and you will need to go into the menu to manually redo all the parameters you use regularly.

  All these are things you can do yourself and which costs nothing to try. They may or may not help. If so, great. If not, you will need to have a repair technician look at the camera. Either find someone local who can work on it or send it to Service Dept. Canon

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• Firefox windows 10 flash problem

  I can't update my flashplayer in 10 rounds. It loads the page but as seen on the image that is displayed. Is - this compatablety problems?

  Hello Blueman, since windows 10 is at an early stage of the beta at present, third-party software like flash (and firefox) can not support it yet...
  http://www.Adobe.com/products/flashplayer/tech-specs.html

  You can try this alternative place to download to the flash plugin if: https://www.adobe.com/products/flashplayer/distribution3.html

• Flash problem

  I use Firefox 14 & I noticed that I just downloaded a new Flash update. Since then, FF does not display any video or Flash on different Web sites.

  Someone has any suggestions how to solve this problem? Should I uninstall Flash and reinstall?

  Read this article: 11.3 Flash does not load video in Firefox. Does that help?

• charge light flashing problem with hp probook 4530 s [redacted]

  I have a problem with my hp probook 4530 s serial number: [edited by Moderator]. A few times while I use the continuous orange light flashing load on the battery and if I stop the laptop and try turning on the laptop, the orange charge light blinks 8 times and it is not running until I remove and insert using battery me back.kindly I'm so nervous.

  more information:

  Windows 7 ultimate 64-bit

  BIOS version: F.25

  [number removed for privacy]

  Finally, I think it worked.

  bios for update

  Version: F.40 (March 12, 2013)

  its almost 10 hours and I load/unloaded my laptop 2 times and his works fine. mashAllah.

  No problem flashing light up now.

  hope I never face again the blinking light problem. God willing.

  Here is the download link for the latest version of the bios:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & prodNameId = 5060882 & swEnvOID = 4053 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-116443-1

  Note: the BIOS update is sometimes risky, so be careful and follow each instruction.

• iMac 4 k (end of 2015) photoshop screen flashing problem/bug

  Hello

  I'm a Retoucher, so I use Adobe Photoshop to do my job.

  Recently, I bought a new iMac 21.5 (end of 2015) with the cool Retina display 4 k.

  Configuration:

  OS X El Capitan

  Version: 10.11.3 (15 d 21)

  iMac (retina 4K, 21.5 inches, end of 2015)

  Processor: 3.1 GHz Intel Core i5

  Memory: 8 GB 1867 MHz DDR3

  Graphics card: Intel Pro Iris Graphics 6200 1536 MB

  But the happiness was gone soon after the installation of Adobe Photoshop and trying to do my job. The fact is that I found a disgusting bug. My screen goes black / begins to blink/flicker (the video is here - https://youtu.be/D-5dF3dvYmM).

  First my thought was - maybe it's a problem with the combinations of keys or graphics tablet. Then I turned off the Tablet and checked the shortcut key settings and tried once more - the problem has not disappeared.

  Then I tried to repeat the bug. I realized that there are not any sequence of actions. Screen flickers randomly. But I noticed - fact screen to browse more often (when you use the tools brush or pad), pressing CMD, SPACE, the [] keys.

  The next step was Google. I found a lot of these questions:

  https://discussions.Apple.com/thread/7349449

  https://discussions.Apple.com/thread/7401844

  https://discussions.Apple.com/thread/7370586

  https://forums.Adobe.com/message/8289188

  https://forums.Adobe.com/message/8337985

  https://forums.Adobe.com/message/8353487

  https://forums.Adobe.com/message/8252309

  https://forums.Adobe.com/message/8392296

  https://forums.Adobe.com/message/8157454

  I have already tried:

  (1) different combinations of the parameters of the advanced graphic processor - nothing has changed

  (2) passing off the coast of the use of the GPU - nothing has changed

  (3) update to my OS x to the latest version - nothing has changed

  (4) update Adobe Photoshop to the latest version - nothing has changed

  (5) restore default settings PS - nothing has changed

  There is ONLY a SINGLE REALLY WORKING solution - https://www.youtube.com/watch?v=8aGJBafQWTg

  + Chris Hong Here is a very ugly solution - I realized that this issue only happens when my cursor for eraser size is too large. I just went into preferences > slider and make the precise cursor. He stopped the issue of flashing. Although it makes the little hard work on photoshop.

  
  

  It's really worked, but done PS is usless to me (and as I understood it too for many users of the new iMac 4K).

  I tried to make a comeback to the iMac, but my dealer Apple told me that it is software problem, so that they can't return to my iMac and get a refund.

  Dear Apple or Adobe,

  Please solve this terrible problem.

  I look forward to your response and resolution of my problem.

  Thank you.

  Yours faithfully,

  Alyona

  PS Sorry for my English.

  Hello

  I have the same problem with my iMac nine 4K, the latest version of the operating system and Photoshop was last updated.

  I've contacted Apple and Adobe, but Adobe has no answer for us, and Apple says it's a software problem, Adobe has to solve.

  The really unique solution for not having the flashing black screen is the one you posted, made a comment on a Youtube video: set the cursor as "accurate".

  I agree with your prayer: Please Adobe and Apple fix this bug!

  Tatiana

• computer program Flash problem

  trying to solve a computer problem, given that the online games I play keep saying the program flash update despite the update several times. I tried to reinstall flash with success and not luck, and when I did a virus scan nothing. I even tried a system restore, but could not complete because of a missing file. Help, please.

  What is the exact message that you receive?   Which virus program do you "run"?

• Rebel T3i Flash problem?

  Hi all

  I was recently given a T3i as a birthday gift.  I've been playing with the camera and have noticed a weird problem with the built-in flash.  She fires as expected when you use the viewfinder, but when using the screen live LCD or quick modes, popping up from flash flashes a busy screen, and try to take a picture will result in flash not firing and the camera all becomes unresponsive.  It will not respond to any key, except the menu and playback buttons, and it does not appear to turn on and off by switching the power switch.  These symptoms persist until I have remove and replace the battery.  Is - it so the camera is supposed to work?  I have read that you cannot use live modes with an external flash, but it also includes the bulit in one?

  Check the website to see if you have the latest firmware for the Canon camera.  He shouldn't be locked up in the way you described.

  I never used the fast mode on my T5.  And, I rarely use flash, simply because it is not very good beyond a distance of 5 to 10 feet and more than the typical kit lens, 18-55 mm, lenses tend to cast a shadow on the image.

• G10 Flash problem after replacement of the lens - ideas?

  
  

  Hi, I'm guessing that you don't have the service software, update of tables, box of collimator etc to recalibrate the system of lenses?

  When the camera takes pictures in what image?

  I doubt you have 2 bad lenses.

  You have the service manual? Platinum flash connects usually to DC power immediately the battery box, look in this area for a problem with a connector, you can have inverted one on both devices? I worked on a few models, G5 and the S5, but never on the Assembly of lenses because of all the special tools and software required. I was able to locate the service manuals for the ones I worked on the first. If you do not try and find maintenance manual.

  So my assumptions are you making the same mistake with the connectors on the PCB flash on or near the battery on both devices box or systems of lenses must be recalibrated is why you have this symptom "hunting".

  Also as a thought after you have the AC adapter, if so try using them and see if the flash works. If it works with that then your problem is most certainly in or around the battery box/cards PCB.

  Let me know what you find.

  John

• BlackBerry Smartphones LED flashing problem

  Sometimes, when I get new e-mails my LED flashes.

  Sometimes it doesn't.  I've checked everything on my

  notification of profile.

  Someone told me that the flashing of the LED goes away after

  15 minutes.  Is this true?

  I also have the same problem with text messages.

  When the phone is switched off, does this affect the LED
  flashing function?

  Thank you.

  Hi there Texas,

  If your phone is correctly configured with the correct profiles and the LED does not flash

  Once defined, I think you have three options.

  (1) the device OS

  (2) return the default phone and get another.

  (3) try the free trial of BB alerts to see if this correction is the problem.

  The full price of the program is $12.95 cents. Download from the

  the link I posted originally.

  Thank you

  Bifocals

  Procedure for loading device OS:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=General_Functions&thread.ID=3209

• Flash problem diving remov

  When I delete a flash drive, I click on the icon and select eject the disc. I get a message that t indicates that I need to close open files, but there are no open files. In the past, I just got a message that it was ok to remove the drive. What caused this display and how can I solve this problem?

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  As described in the question, I understand that you can not remove the flash drive safely on the Windows 7 computer. I will certainly help you in this regard.

  The message (this device is currently in use. Close any programs or windows that might be using the device, and then try again) is usually the result of an application, file, open the document, audio or video, or any other application is being used (ranging from the USB key) when you try to remove it by clicking Remove the device safely in the notification area.

  The error can also be caused if your anti-virus is actively followed / analyze the USB drive. Normally, where the withdrawal of a USB flash drive, Windows must stop all operations of reading / writing on the disk so that it can be removed safely. If this is not the case, the flash player may be damaged or lost or corrupted data. However, if Windows determines that a file is in use, it can then provide a message that indicates the volume cannot be stopped now.

  So, before to eject or unplug a mass storage device, make sure that none of these activities are performed on the mass storage device before ejecting.

  A cut-off device

  Most USB devices can be removed and unplugged. When the fact of unplugging storage devices, such as USB flash drives, make sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.

  If you see the icon remove the device safely in the tray on the right side of the taskbar, you can use it as an indication that devices have finished all operations in progress and are ready to be removed. Click the icon and you will see a list of devices. Click the device you want to remove. Windows will display a notification to tell you that it is safe to remove the device.

  Back to us for any problem related to Windows. We will be happy to help you. We at Microsoft try to provide our customers the best experience.

• DeskJet 5550 cartridge status light flashing problem

  I have a Deskjet 5550. The power led is on and the print cartridge status light is FLASHING. Immediately before that, the prints have a lot of black and color.

  I opened and closed the plate on the cartridges.

  I took on each of the two cartridges and put back them in.

  I have looked for "the yellow arrow and icons", but can not find them.

  I turned the printer on and outside.

  I turned off the computer (Compac Presario CG60 - 206US Notebook PC) and rebooted.

  Help! Please, I beg you! Thank you!!!

  Hi mmdb1,

  I understand that the cartridges are not cheap, but to help isolate the problem, try another set of cartridges. If you install a new set and the problem is resolved, you can then contact our technical support line for the replaced defective cartridges.

• Flash problems

  I have problems with flash player on the edge. Windows 10 home, 1511 version, OS build 10586.218. The Flash version is 21.0.0 problem noted in the Facebook games. OK working in internet explore. Any help?

  Here you go:

  Recovery in Windows 10 options - Windows help

  See your PC > keep my files

• Flash problems began this week - noticed in vmware

  Problems with right click Flash - noticed in vmware (vcloud Director / vrealize / vsphere web client)-problem in browsers

  started happening for any departure in office and people on twitter also talk about

  That is why a bug in adobe flash player that must respond to the

  Hello

  If it's the same issue as Bug #4136275 - click handler right broken in 21.0.0.213 in Google Chrome , then it is set to 21.0.0.216, please update the chrome browser.

  Thank you

• MIT CC 2015 Flash Adobe Flash problem

  Hallo, ich habe zu Weihnachten bekommen Wacom tablet, Intuos to draw S. Ich habe're so angeschlossen/clear wie're in der Anleitung steht und habe die could Treiber installed. Sharps of Ich habe mir compressed so, um mit Flash besser convince zu können. Aber wenn ich mit einem Freihandwerkzeug/Pinselwerkzeug zeichne, wird (ohne das ich had adjusted habe) eine Linie nach right protection.

  Dies of da ich mir das Digitalisierer nur as Flash Freizeitaktivitaten habe, ist sehr schade as mich. I hope ihr wisst wie ich dieses problem kann losen. Also ist Testversionszeit von Adobe Flash abgelaufen, also kann ich meine're nicht mehr nachprufen. VIELLEICHT kann mein Freund dies as mich nachprufen. Grave of are as diesen Bug Fehlerbehebung gibt IHR konntet bitte keine died im next update nachreichen? I hope ihr habt eine Lösung fur dieses problem.

  Read some of the suggestions here, especially the one on the definition of the DPI at 100%:

  Flash drawing of 2014 CC with Tablet creates straight lines