EOS - 6 d: iPhone 6 s not able to detect the wifi of 6 d

I recently changed my phone from 6 6 s 6 s iPhone iPhone iPhone was not able to detect the wifi of the camera. My mini iPad 2 was able to detect the wifi of the camera. This is a known issue and a solution for this? Thank you in advance.

Communitty one Apple provides some tips. It turns out that I just needed to restart my phone to iPhone detect the camera wifi signal. Thanks to everyone who helped me.

Tags: Canon Camera

Similar Questions

  • Not able to detect the wifi on my laptop

    I have a Dell inspiron 1525. Recently I got Hp deskjet all-in-one 2545 wireless printer. The printer beeps wifi that I could connect at once. But the next time I tried it does not work. The printer is emitting the wi - fi signal but my laptop doesn't detect any wireless network. Please find a solution to my problem.

    I don't have any other wireless networks, other than the printer.

    How you connect this laptop to the Internet when you're at home?

    Print a Network Setup page and a page of network test by pressing the wireless button and Start copy Black button at the same time (see page 6 of the user's Guide).  Please have the following information on these pages:

    IP address

    Default gateway

    The network name

    Network status

    Networks detected

    On the laptop, open a command prompt window by typing cmd.exe in the search box and press ENTER.  In the black command prompt window, type the following command, and press ENTER after each line

    ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".

    Notepad '% userprofile%\Desktop\ipinfo.txt '.

    output

    Select all the text in the opened window of Notepad (CTRL + A) and copy (CTRL + C).  Then click on in your response here and paste (CTRL + V) the information.  You can close the Notepad window and remove ipinfo.txt from your desktop when completed.

    Go to devices and printers

    Click on any icon in the section 'printers and faxes '.

    Click on the "Print server properties" button in the toolbar at the top of the window

    Click the "Ports" tab

    List of all the ports indicated other than LPT and COM ports  You may need to expand the "Ports" column by clicking and dragging the line between the 'Ports' and 'Description' to see the full port names

    For any port, names that resemble an IP (e.g. 192.168.1.100, 169.254.0.1), include the "Description" and "Printer" and the name of the Port.

  • "Data binding will be not able to detect the transfer..." "while [bindable] is set.

    Hello world

    Thank you for taking some time to try to help me.

    I get the warning "data binding will not be able to detect the assignment... "for a

    Collection ArrayCollection all [bindable] properties are set correctly - at least I think... ;-)

    [bindable]
    private var allParties:ArrayCollection = new ArrayCollection();
    
    and then, later:
                   <s:DropDownList id="dropDownList_party_sprecher1"
                                                            [...]
                                       labelField="_internal_partyname">
                        <s:AsyncListView list="{allParties}"/>
                   </s:DropDownList>
    

    The elements of the array collections are a custom class to the mine, which has been automatically

    generated by the php flash builder Gizmo service. This class is also marked as [bindable]:

    [Bindable]
    public class Parties extends _Super_Parties
    {
         [...]
    }
    

    and the extended with class

    [Managed]
    [ExcludeClass]
    public class _Super_Parties extends flash.events.EventDispatcher implements com.adobe.fiber.valueobjects.IValueObject
    {
    [...]
    
         [Bindable(event="propertyChange")] 
        public function get idx() : int    
        {
                return _internal_idx;
        }    
         [Bindable(event="propertyChange")]
        public function get partyname() : String    
        {
                return _internal_partyname;
        }  
    [...]
    }
    
    As I understand it, the [Managed] makes the whole class 
    [bindable] as well and the getters are marked too.
    I've put the [bindable] keyword anywhere I could imagine 
    but it doesn't help at all.
    In principle I wouldn't mind the warning, but the 
    dropdown-list doesn't work.
    
    Please let me know if you need any more information,
    
    Thanks
    
    
    
    

    Try not to allParties

  • ODI is not able to detect the primary/foreign keys to XML - the user has no privilege or object not found

    Hi guys,.

    Im trying to load an XML with the address of two entities and employee as below. The topology of reverse engineering, everything works well. Even able to display the xml data in ODI, but when I try to load the data of these two entities join by the schema of the primary keys and foreign keys which created odi engineering process reverses for xml, im im getting the error below.  IM able to load an entity data, error occurs only when I use the join odi creates internally to identify employees for xml and address components

    XML file:

    <? XML version = "1.0" encoding = "UTF-8"? >

    < EMP >

    < Empsch >

    < employee >

    < EmployeeID 12345 > < / EmployeeID >

    < original > t < / initials >

    John < name > < / LastName >

    DOE < FirstName > < / name >

    < / employee >

    < address >

    < > 12345 as WorkPhone < / as WorkPhone >

    < WorkAddress > test 234 < / WorkAddress >

    < / address >

    < / Empsch >

    < / EMP >

    Topology: jdbc:snps:xml?f=C:/Temp/RR/Empsch.xml & s = Empsch & re = EMP & dod = true & nobu = false

    Error message:

    -5501: 42501: java.sql.SQLException: user has no privilege or object not found: EMPSCH. EMPSCHPK

    java.sql.SQLException: user has no privilege or object not found: EMPSCH. EMPSCHPK

    at org.hsqldb.jdbc.Util.sqlException (unknown Source)

    for org.hsqldb.jdbc.JDBCPreparedStatement. < init >(Unknown Source)

    at org.hsqldb.jdbc.JDBCConnection.prepareStatement (unknown Source)

    at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.prepareStatement(SnpsXmlConnection.java:1232)

    at sun.reflect.GeneratedMethodAccessor65.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    to oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$ OnDisconnectCommandExecutionHandler.invoke (OnConnectOnDisconnectDataSourceAdapter.java:200)

    to $Proxy2.prepareStatement (Unknown Source)

    at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)

    at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)

    at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)

    at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:81)

    at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)

    at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:70)

    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)

    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)

    at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)

    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)

    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)

    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)

    at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)

    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)

    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)

    at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)

    to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

    at java.lang.Thread.run(Thread.java:662)

    Caused by: org.hsqldb.HsqlException: the user has no privilege or object not found: EMPSCH. EMPSCHPK

    at org.hsqldb.error.Error.error (unknown Source)

    at org.hsqldb.ExpressionColumn.checkColumnsResolved (unknown Source)

    at org.hsqldb.QueryExpression.resolve (unknown Source)

    at org.hsqldb.ParserDQL.compileCursorSpecification (unknown Source)

    at org.hsqldb.ParserCommand.compilePart (unknown Source)

    at org.hsqldb.ParserCommand.compileStatement (unknown Source)

    at org.hsqldb.Session.compileStatement (unknown Source)

    at org.hsqldb.StatementManager.compile (unknown Source)

    at org.hsqldb.Session.execute (unknown Source)

    ... more than 27

    Please advice

    Thank you

    Fabien

    It is clear from the content of the xml file, you have given here. In this xml file, you have four type of complex. Two of them are employed and address. However the employee doesnot has nothing to do with the address that you have not added the relationship. That is why its failure. This isn't the fault of the ODI.

    Also I suggest not to use self-generated by ODI dtd that you might face problem in the future. For example, the address of XML type has 8 attributes, and 4 of them are not mandatory. This means that each of your xml file may have attributes between 4 and 8.  That's where ODI auto generated DTD fails.

    ComplexType element XML schema

    Thank you

    Chantal

  • An unexpected error has occurred. Setup was not able to detect the Windows Media Player updates. Please try again later.

    I see the above error message when I try to update WMP. Windows 7 64-bit.

    There is no update, but you should just get a dialog telling you that.

    Is your Control Panel, Windows update works correctly?  I guess that it is not.  There are several current issues on Windows update does not work then search the forum for this if you don't think it's defective.

  • Why am I not able to authorize the wifi calls?

    I'm on version 9.3.2 and I tried to restart, but I still have that function and others under settings > phone

    Hello. Where are you from? Info from this article https://support.apple.com/en-us/HT203032

    If you can not activate or use Wi - Fi calling, make sure your carrier offers Wi-Fi calling and that your devices have the latest version of the software. Then, follow these steps if you cannot activate Wi - Fi calling or make a call to a Wi - Fi connection. Wait two minutes before moving from one stage to the other.

    1. Go to settings > phone > Wi - Fi calling and make sure Wi - Fi, the call is on.
    2. Restart your iPhone.
    3. To connect to another Wi - Fi network. Not all Wi - Fi networks work with Wi - Fi calling.
    4. Turn off, Wi - Fi calling then on again.
    5. Go to settings > general > Reset and tap reset network settings.

    FaceTime is not available in all countries or regions.

  • Example: Pavilion Notebook: not able to capture the wifi

    My laptopn is getting very hot with pick up my wireless connection, which is a few feet across the room. My other devices work very good about it, but the laptop has trouble finding in the majority of cases. I use a very late version of Windows 8.1 called Areo SX. The laptop connects momentarily and then in a blink he disappears. Also, in regards to other nearby wireless connections, the laptop is unable to locate any at all. A quick response will be greatly apreciated.

    Hey @Rvssian,

    Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

    I understand that you are having problems with the wireless on your HP laptop. I'd be happy to help you with that.

    What is the model number of the laptop, you are having trouble with? If uncertain, you can find that here: http://support.hp.com/us-en/drivers/

    What operating system you use on your laptop?

    When this issue started to happen?

    Is there an error message?

    The following pages are useful for troubleshooting wireless connectivity problems.
    Troubleshooting wireless network and Internet (Windows Vista)
    Troubleshooting your wireless network and Internet access (Windows 7)

    Troubleshooting wireless network and Internet (Windows 8) Troubleshooting wireless network and Internet (Windows 10)
    Wireless Internet connection is Intermittent or Slow (Windows XP)

    In addition, you can watch the the power management of your wireless adapter:
    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Forget a network (Windows 10)
    Forget wireless network profiles in Windows 10

    Forget a network (Windows Vista)
    1. start network and sharing Center.
    2. in the pane tasks, click on manage wireless networks.
    3. right click on the connection that you want to delete and then click on remove network.
    4. in wireless networks handle - warning dialog box, click OK.
    5. the connection is removed from the list of wireless connections that you can view or edit.

    Forget the network: (Windows 7)
    1. press start.
    2. tap manage wireless networks, click on the application at the top of the start menu.
    3. right click on the network, and then click on remove network.
    4 confirm the warning by clicking OK.

    Forget the network: (Windows 8)
    1. press Windows Key + C
    2. click on settings.
    3. click on change PC settings.
    4. click on network on the left.
    5. click on manage known networks.
    6. click on the name of the network.
    7. click on forget.

    Reset TCP/IP on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the Winsock Catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from http://support.hp.com/us-en/drivers/ , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

    Have you tried the steps on your own?

    Please hold me.

    By pressing the Thumbs Up button below, you can always say thank you!

    See you soon.

  • CD/DVD drivers are missing and my system is not able to detect the dvd drive.

    Hi, after installing some updates my dvd/cd drive is not detected by the system and the option is not in my computer menu, so I checked in the Device Manager. and my cd/dvd drivers are completely absent and not present in the Device Manager. I m using vista Home premium, help someone
    Thank you

    Hello

    1st reboot and watch again in Device Manager:

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls.

    I have an iphone 6. Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls. Help, please.

    It is a problem of carrier - I would like to talk with my carrier

    Your signal may be weak or you can be in a dead zone - or there may be interference - those that can cause the call to go directly to voicemail

  • DNG Converter is not able to open the cr2 (greyed icons) files.

    DNG Converter not able to open the cr2 (greyed icons) files if they are on the disc or the office. With the help of Mac El Capitan, CC, Canon 6 d. Used to work on the earlier Mac OS. Similarly, the "get photos from camera" button in cc Bridge does not detect any photos or devices. What needs to be put in place for the DNG Converter recognise once again my cr2 files?

    It's apparently a problem with El Capitan. See this thread:

    Photo Downloader Adobe Bridge recognizing only no camera after upgrading to El captain in Mac

    Copy of the correct answer: ' discovered Adobe Bridge CC with Mac OS 10.11 (El Capitan) does not work with many USB devices to import images (including iPhone). " Apple said: "the USB stack is completely redesigned to improve stability and performance compared to Mac OS 10.10. Applications and third-party drivers for vendor-specific USB devices may require modification. "This is something APPLE has changed, that I hope that Adobe can answer, because now there is no real solution. »

  • Not able to start the trial

    I thought I'd give Revel to try, so I just installed the soft of Revel for iPhone on my iPhone4 (running ios 6.1.3).

    I loaded the application; entered by Adobe ID; received a verification email and clicked on the link; entered my date of birth, as requested (why?) and then I get the following error message:

    Not able to start the trial

    There was an error at the start of the free

    trial. Check your network

    connection and try again

    I'm sure it's not a problem with the (WiFi) network connection and I have uninstalled and reinstalled the software and restarted the iPhone for good measure, but I still can not past this.

    Can someone tell me where I'm wrong?

    Thank you!

    Problem solved!

    I connected to the adoberevel.com with my Adobe ID and uploaded a single photo.

    Then I deleted and reinstalled the iPhone application, and this time accepted soft my Adobe ID without problem and displays the photo uploaded. All the features now seem to be working OK.

    I hope this will help someone else with a similar problem!

  • I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

    I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

    Thank you

    Anton

    Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

    I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

    131 free and high quality without font serif to choose here. I'm sure you can find a desired.

  • I am not able to change the video quality for you tube. There are only two options 360 and Auto. Please help me.

    Hi I am experiencing strange problem for 15 to 20 days and I am not able to change the video quality for you tube. There are only two options 360 and Auto. Help me please if you can because I have a slow internet connection and I want to play video at 240, as it was before. Thanks in advance for your help.

    Could check you whether YouTube is to serve its HTML5 player or the player based on Flash? If you right click on the drive, short a context menu should appear. If the full Firefox context menu is displayed, press and release the ALT key to erase that. The last line of the menu short usually indicates which player he is.

    I'll assume HTML5 because...

    On Windows 7, Firefox should show a wide range of formats in the HTML5 player. However, if some of the features of media are disabled, preventing video MP4 decoding, then YouTube offers only 360 p (with WebM coding).

    If you have intentionally disabled Media Foundation and/or DirectShow in topic: config, then perhaps you would prefer to use the YouTube Flash Player? There are a few Add-ons that can force YouTube to serve you a Flash drive. Either of them will do, you don't need both:

  • I bought an iphone6.  I registered. On the apple's music. But I'm not able to get the free month trial subscription

    I bought an iphone6.  I registered. On the apple's music. But I'm not able to get the free month trial subscription

    What happens when you try?

  • Not able to download the sims2: great collection on the app store

    A few days ago, I decided to buy the sims2 on the App Store (with 50% discount). Unfortunately, I'm not able to buy the game on the App Store because "article is being adjusted. The App Store tells me to try again later, but three days later it still does not work. Someone has the same problem, or would it be a specific problem with my MacBook? OS El Captain 10.11.3.

    Thank you!!

    OS X on your v10.11.6 Mac update, then try to download Sims2.

    Open system preferences > App Store, and then click check now.

    This should take you through the update process.

    And check the Gatekeeper.

    Back to System Preferences > Privacy & security, then select the general tab.

    Ensure that: Mac App Store and identified developers is selected.

    If the above has not helped, if installed, disable the anti-virus software, and then try to download the app again.

Maybe you are looking for