EPA 10 - screen white in the monitor during the video game - but all is well in the CS6 APPro

Similar Questions

• Satellite Pro L40 - 15A - Windows XP screen white when the cover is open

  Hey,.

  So when I closed the lid on my laptop for a while and then reopen the lid, the screen remains white (black). The only way I found to get back on the screen is to re-boot.
  In power management, I put 'Status quo' for when I close the lid on my computer and power management is ' Always on '.

  I have the latest Bios and updates to the system.

  Satellite Pro L40 - 15A
  winXP

  Any help appreciated.

  Hi ib1.

  You use the version preinstalled Windows from Toshiba or is it your own installation?

  What to update the display driver? Take a look at the Toshiba page for the new display driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Don t forget to look in the * archives * on Toshiba page because this model is a little older, so all of the downloads are moved in archive.

  Check this box!

• Screen white when the screen is moved forward

  When my screen is placed at an angle less than 90 degrees, it becomes empty? his fine wen back past 90 degrees, but goes blank when his attacker

  Hello

  Check with the manufacturer of your system, their books online and their forums (if any) than
  probably is by design. No matter what is not a function of Windows.

  Control Panel - Power Options - choose the closing cover

  But that does not affect the sensitivity, or if he stops everything which the hardware manufacturer
  may have set up.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Premiere Pro CS6 video game but the screen display is black?

  I recently installed debut video capture software and installed codecs for it. I recorded some videos and imported into premiere. When I put it in the sequence and press play, it shows just a black screen, but play the sounds. I played it in photoshop and fine vlc but not first pro. Also, I opened a project I worked on before installing the video capture, and it plays the sound, but shows an empty preview. It worked fine before. How can I fix? I reinstall the creation, or reset something?

  Well, I discovered the problem, first sort was not automatic running on my Nvidia card and that's why it didn't work. I reinstalled first and now my main project media is all dissociated, and the audio is messed up.

  Thanks for all your help.

• Hi I am trying to install a video game, but I get an error and I am new with Windows 7 Starter since 24/11/09 (I use to be with Windows XP so have no idea about the new thing in Win 7)

  The error I get is this bellow.
  
  

  1. Installation Information

  Error writing to the file: C:\Program Files\FireStarter Gaming\Dekaron Rusaki\data\data.pak.   Make sure you have access to this directory.

  OK, so what I don't understand is part here.
  Make sure you have access to this directory.

  Why don't I have access to My/that Directory if I'm the administrator / owner of my laptop?  If I can not then who can? Microsoft... ?

  Thank you
     
  Steven Jr

  @Steven jr,
  You are able to install other applications?  Verify that you can install other software (you can install a component of Windows Live Essentials from here).  If you can install other software, then contact the manufacturer of the support software.  They may have to update the installer to load correctly on Windows 7.

  @tomsei72,.
  Looks like your video driver needs to be updated since it was created before the release of Windows 7. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• blue screens of death every time I play video games with atikmdag.sys.

  As the title says, here's my current pc specs:

  OS: Windows Vista Ultimate Edition

  Motherboard: Asus M2N - SLI DELUXE

  RAM: 3 GB Corsair DDR2

  Hard drive: 250 GB, SATA

  DVD player: Sony DVD + R 20 x

  Graphics card: Gecube Radeon HD 3850

  CPU: CPU AMD Athlon (TM) core 6400 +.
  And the report of core:

  Filename	Address to stack	From Address	To Address	Size	Time Stamp	Time String	Product Name	Description of the file	File Version	Company	Full Path
  atikmdag.sys	atikmdag.sys + fa0dc	fffff880'04889000	fffff880'052ef000	0x00a66000	0x4ebb3c7e	10/11/2011 02:52:46

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
  a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
  Tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• my sound jumps and comes in and out in a game, but works very well for music and the moveis and things like that it's just the fact that in games

  sound

  Hello

  How can I stop my music skip or break down when I play?
  http://windowshelp.Microsoft.com/Windows/en-us/help/36db5c82-9247-4346-909a-f87743b653ae1033.mspx#EFC

  1. right click the icon of speaker near right lower clock - peripheral of reading

  Highlight speakers - properties (right same low page) - tab improvements - check Disable all sound effects
  Apply - OK

  2. check the configuration - Device Manager - sound, video and game controller

  Note name and complete model of the audio device - full decription - now double click it.
  Driver tab - notice the driver version. Then click on set to update driver (maybe nothing like MS is far
  behind the pilots of certification). Then right CLICK on the device - UNINSTALL - REBOOT - it will refresh
  the driver stack.

  Now go to system Maker and look for the updated drivers (or get the same if no new) it will be
  your rescue. Download - SAVE - go to where you put it-RIGHT click in it - RUN AS ADMIN

  Then do the same for the manufacturer of the device (like Realtek or who made the device).

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  
  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite L300-PSLB8E - screen becomes all white and the laptop freezes

  Hello

  I have a Toshiba Satellite L300 PSLB8E. I initially bought with Windows Vista already installed on it. After a few years, I changed the operating system Windows 7 Ultimate. I installed the display and all the other necessary drivers (that is, sound, network, etc.).

  After I installed Windows 7, when I use the laptop for a while, the screen becomes all white and the laptop hangs. This happens spontaneously. Sometimes, in less than 10 minutes and other times that it can work perfectly for hours. I checked for loose batteries and other components, but everything seems fine.

  Physical damage only that there is a tiny crack on the screen in the bottom right of the screen. The operating system is not good? If I put windows Vista back as it was?

  Please advise and help understand me what the problem is with the laptop.

  Until we start discussion can you tell me what you do when this happen?
  Hard stop and restart?
  Is everything OK again when you do?

  It is not easy to say what exactly is the problem, but I put t think there is problem with OS and preinstalled display driver. A long time ago I installed Win7 Home Premium on friends L300 and it works perfectly.

  What you can try is to use the external monitor for a while and see if everything works well. If so, there is no problem with the operating system, drivers or graphics card. It may be that the display problem.

• Black horizontal lines on the LCD screen at a specific time during the start and stop

  Hi, I am currently using a Presario CQ61 Notebook PC.  My problem, as indicated in the title, are black lines on the LCD screen, apparently when the screen is reset or enclose itself turned off during the start and stop only. From the judgment, he produced a split second her stops the hard drive, after that the screen is black. The lines and then quickly disappear. At startup, lines appear after the Windows logo has passed and the screen went from black to start loading the login screen.

  The LCD is in perfect condition, all using the PC. No line, no discoloration, etc.. Nothing extraordinary either. The problem does occur only during these two periods, specifically. I am also unable to note the lines when I'm looking directly at the screen. I have to be standing next to the PC, at an angle.

  Now, I had this PC for a considerable amount of time, however, I never paid much attention to the screen when starting upwards or stop, so this could definitely be something that the laptop has done since I bought it. I also read on similar problems, and it could be an outdated video driver or BIOS.

  I want to just make sure that it is not a major problem. Thank you all!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  1) click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility. Under the Services tab, click to select the hide all Microsoft services check box, and then go to tap Start , click on disable all. Click apply OK restart the device.

  (2) please visit the HP website and update the Bios and graphics drivers on the unit.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Set up the 2nd screen using non-apple monitor

  iMac 21.5 "4K, 10.11.6 Add either a ViewSonic monitor #VA2055Sa, or #VX2253MH as 2nd screen.

  A monitor will be visible, but the resolution, which says VS. resolution goes up to 1920 x 1080, but don't not appear in the configuration menu. They have a work around with a PC, but have not been able to find one on the Mac side.

  Does anyone else have this problem and/or a possibility of soling it? We have tried to use a PC, but could not work there either. Hoping someone has an idea.

  Look for your model iMac tecniques and match the closest resolution to you on your screen. For example, in the http://www.apple.com/imac/specs/ camera and video section, you will find the available output resolutions.

• a white screen and then the application crashes

  When I go to my iPhone mail app, there is just a white screen. Sometimes after a few seconds, the application crashes. I can't delete the app because it seems to be "built in". My mail works fine on the MacBook Pro and iPad. I tried all the suggestions on the forum.

  1. Warm reboot
  2. Toggle the settings of the aircraft
  3. Supprimer delete accounts, and then add them again
  4. Recover from a previous backup
  5. Hard Reset then retrieve

  Nothing effects mail app it seems be frozen piloted to white, so double-click on the "home" button I see the screen of e-mail in the list, but it is old age and if I select mail it displays the old page but all frozen. How can reset my mail without going through the whole hard reset, process to recover again everything seems to work.

  Update to iOS 9.3.2.

  Reset your network settings. Power cycle your iDevice.

  This should help.

• Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

• Screen / phone does not not during the current incoming call.

  All;

  I just noticed this behavior 2 days ago and it went this AM as well. During an incoming call, I tried to access the data on my Bravo but the screen was dark and pressing the unlock/lock button at the top has nothing more than any other control. I haven't lost the appeal and I got the info written down, so I got to the question on the ground. As soon as the call is completed, I could see the screen by pressing the menu and then command unlock the phone with the swipe.

  I also noticed that there are no e-mail messages. I decided to power off the device (soft reset). Messages, then went down, but 2 days ago I did not have a message problem. But had the black screen and no access to the phone during the call. I've not seen this with outgoing calls. I have no trouble to access items on the phone call I have orginate. All the world has noticed this incoming call blocking? It would almost seem that controls spend sleep during incoming calls. I have not found references in this regard so far.

  I found that when the phone is turned off and then back on most of the problems are solved. Since I'm old to computers in general this is not a surprise but falls into the area of practice or standard procedure. I will say that the absence of data loss during these resets is a good thing.

  Carl

  
  

• I added third monitor display windows on it but the mouse is not going on the third screen

  I added third monitor display windows on it but the mouse is not going on the third screen

  Hello

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. does the problem occur when you are working on a particular application?

  We will define the third monitor as primary monitor and check the functionality of the mouse.

  Link:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=XT_Tjm0Ldrb

  Please return to the State of the question.

• How to change the screen on my new monitor ratio?

  Original title: report of the screen

  How can I change my ratio of the screen for a new monitor, I bought?

  Right click on an empty space on your desktop, then...
  Properties-> (tab) settings->
  Then move the cursor in the box "Screen Resolution."

  HTH,
  JW