EPMA Essbase BSO cube with text measures

Similar Questions

• Calculation of the report in Essbase BSO cube

  I was hoping to get some ideas on how to implement a calculation of ratio in a cube Essbase BSO. To help explain the problem, in the sketch of the Sample.Basic, if I need to add a new Member to the dimension account called SalesMarketRatio and defined as sales of products in each market to Total sales of products in all markets.
  
  For example, SalesMarketRatio to 100-10 in New York would be sales-> 100-10 - > New York/sales-> 100-10-> market.
  For example, SalesMarketRatio for 100-20 in New York would be sales-> 100-20 - > New York/sales-> 100-20-> market.
  For example, SalesMarketRatio for 100-20 Florida is sales-> 100-20 - > Florida/sales-> 100-20-> market.
  
  I am open to that SalesMarketRatio is a member of Dynamics-calc, or stored and calculated via a calc script. In Sample.Basic, I am able to hardcode each combination but it is not an option in our real example since the scattered dimensions are huge with thousands of members each. Any ideas would be very appreciated. Thanks in advance.

  The formula could be as simple as:

  Sales/Sales->Market;
  

  The members of the product and the market 'numerator' are defined implicitly everywhere where you calculate / collect.

• Impossible to enter data to Parent - Essbase BSO Cube level member

  Hello
  
  I'm unable to enter data on the form in line against a member parent in the entity dimension. The Web form gets classified off when I select the parent member (level 1) level enter store information of text (from the account Dimension)
  
  So my selection of page elements is the entity dimension and my lines are account codes (account dimension) and the column is a dimension of the year. I can enter and save data on the selection of the level 0 member, but when I select its parent, cells member is listed on.
  
  I understand that it is not advisable to enter data at zero level members. Users would still like to store textual information about the parent member. According to my understanding, BSO Cubes should allow us to enter data into the zero-level member.
  
  Kindly advice.
  
  Thank you
  
  Thomas
  
  Cube Essbase BSO
  Dimension feature - Sparse - element of the Web Form Page
  Account the Dimension - as always Dense - rows on the Web Form
  Year Dimension - Sparse - column on the Web form

  Yes, "Ascending" you cannot enter data at a higher level. You must do as a target version, then you can enter any level of data.
  You can also create several versions and make any version as 'target' version and enter the data for the target version.

• Need help with loading BSO cube with several data export files using the Regional service

  Hello
  
  We have BSO cubes that are huge and when I expoted data in files, it generated ABC.txt, ABC_1.txt, ABC_2.txt, like this.
  
  How to load this data in the Cube that sits on the other environments? We use Essbase 9.3.1.
  
  I can load the individual files using EAS data loading? If so, ABC_2.txt then ABC_1.txt and finally an ABC.txt would be the loading sequence back?
  
  Please suggest.

  As Essbase is written this block by block, each block will have its complete info if it is done as a single export or parallel export. You can easily prove this (and I have) If you export a database and load only files 2 or 3, it loads without error. don't forget that you load a file rules, the load fails when the first error. There is no error found, so a value of a complete block of information must be present. Also open export (large files can be opened with wordpad) and you will see a complete info for block exery

• Deployment of Application EPMA error (cube Essbase BSO)

  Hello

  I'm trying to deploy the EPMA application & I get the following error:

  Success.

  \\Record #8797 - error adding dynamic calc Member % deep property sales (3320)
  \\Record #8797 - no time dimension defined
  Statistical accounts + S T Stat Reps + X T % deep sales ~ X F E T ' \"5500"-> \"YearTotal\"/\"Sales\"-> \"YearTotal\ ';"    % of sales turnover %
  \\Record #8799 - error adding dynamic calc Member Margin_Inc % property (3320)
  \\Record #8799 - no time dimension defined
  Stat accounts + S T Stat Reps X T Margin_Inc % + X A E T '\"Margin\"/ \"Sales\ '; »

  I'm tagging the account member % deep sales & Margin_Inc % as average of TB, if I set this to none, I do not get these errors and what deploys without errors. Post deployment if I go to the main lines and try to assign average TB directly in EA I am able to do it without any errors.

  I'm on EPMA 11.1.2.1, this error is not involved in the planning application but in cube Essbase BSO EPMA

  Any thoughts?

  Thank you.

  Sorry - reread your post and follows it is an EPMA BSO app, does not intend.  You can try placing the period before dimension the dimension account in order and see if it deploys?  I know that's not ideal, but just as a test.  You can read the end of this possibly related post:

  Re: Essbase Studio - hierarchy of measures

  Thank you

  Jon

• How to query and make general dashboards with BSO cubes

  Hello community,

  Does anyone have the General information on how to make dashboards and repository with bso cubes. We did some dashboards with a few cubes of aso, but we know not even how do data appear in an analysis with bso cubes. We really don't know a lot about the difference between these types of cubes. Help demo or resources would be appreciated.

  Thank you!

  Hello

  If you have managed to do with a cube ASO just do the same.

  The ASO or OSB cubes in the end are cubes...

  The different main, that's how you build your cubes as they probably contains different things with different structures.

  Remember that ASO cubic automagically total when you query it, a BSO cube does almost nothing in itself, so if you don't calculate it you have generally not all aggregates, etc.

  If you failed to get the data of your OSB the question is probably more your cube itself: there data? is it calculated? (if you are using SmartView you something?) you model right? etc.

• Problem EPMA - request for Essbase BSO - UDA

  Hello
  We have a shared in EPMA hierarchy that we use to maintain the Dimensions in applications.
  Among the sizes that I need in the Essbase BSO application - two of them have specific UDAs assigned to them. (two for each Member in these dimensions - UDAs can be shared between dimensions)
  
  Dimension_A
  -Member_A1 (UDAx, UDAy)
  -Member_A2 (UDAp, UDAq)
  
  Dimension_B
  -Member_B1 (UDAx, UDAy)
  -Member_B2 (UDAp, UDAq)
  
  UDA
  -UDAx
  UDAy-
  -UDAp
  -UDAq
  
  But when I deploy the app, I see only a UDA update in the Essbase outline (checked via EAS)
  Dimension_A
  -Member_A1 (UDAx)
  -Member_A2 (UDAp)
  
  Dimension_B
  -Member_B1 (UDAx)
  -Member_B2 (UDAp)
  
  I don't know why it isn't updated outline properly - can anyone suggest what could be the problem?
  I tried redeploying several times / deleting the dimensions by adding still / even rolled out a new app from scratch - no luck.
  
  
  Concerning
  Ankur

  When you add more than 1 UDA. You need to perform a redeployment after the addition of a new UDA.

  Add a new UDA Member-> remove the OLD.
  Deploy.
  Back to EPMA-> add the OLD to the new UDA
  Deploy again.

  Do this for the first of the dimension hierarchy

  Ex:

  DIM [Dimension]
  --Also [parent]
  -A1 [child /Lvl0]
  -A2 [child /Lvl0]
  ------B
  -------------B1
  -------------B2

  Do the changes described above for A, A1 and A2. Once done, the changes should be reflected at B, B1 and B2 and others, as appropriate

  The changes should now be seen in Essbase.

  Published by: 927809 on October 19, 2012 04:51

  Published by: 927809 on October 19, 2012 04:56

  Published by: 927809 on October 19, 2012 04:59

• Convert EPMA Essbase in Standalone Essbase

  Hi guys,.

  I'm working on an existing application to Essbase BSO. It seems to be an application of EPMA. But when I'm checking the last deployment status, I could not see anything like that. I could see that created the application date and date last modified. These dates are 2 years back. But business users are adding members and make the restructuring for the past two years to each month. That's why I think that although it is an EPMA Essbase application, it is not synchronized with EPMA and they use it as a standalone application Essbase. Now, I need to do the hourglass for this app Essbase model optimization. But I couldn't do this in EAS console,, as in an application of EPMA. 

  Now if I change the order of the dimensions in the workspace, of course, I need to deploy it.  But if I deploy my application Essbase in EAS so far would be in sync with the obsolete EPMA dimension. Could you please help me to achieve this optimization of hour glass without touching the workspace. It is also possible to convert the EPMA Essbase asks Essbase standalone application.

  Note: The current state of the application of EPMA Essbase is "deployed but lack of shared services.

  Its urgent for me. Help, please.

  Hello

  But what exactly do you want? you say you want to keep an EPMA application, but you do not want to touch the workspace?

  An Essbase application artifacts of nothing more than its outline, its data, its filters and other. So if you make a copy of your service Regional application, remove the application in the space of work/epma, probably clean up a fair bit in case the app folder and rename your copy app its original name, then you will have a standalone app Essbase.

• Partition of several source BSO cubes to a single target ASO cube

  All,
  
  I want to use Essbase 11.x to create a partition strategy which has several sources (all with the same number of dimensions) BSO cubes partitioned in a single target ASO cube, which has the extra dimensions that source BSO cubes. Is this possible?
  
  
  
  Thank you

  Yes, you can certainly extend servers.

• If I run the calc script to aggregate a BSO cube, it blocks and release each block in a few seconds?

  Hello

  If I run the calc script to aggregate a BSO cube, it blocks and release each block in a few seconds? Or is it keep held locked blocks even after aggregation for this block is over?

  For example if I correct sparse dimensions Forecast, FY15, dec.  and my accounts dimension is only dense, after calc has my senior level members in the accounts, it it will issue after updating (i.e. in fractions of seconds) or is agg keep it held in a lock?

  I ask because I want to run scripts tot., but there is the update of our cube users.  I never had a problem to start agg, while users are updating.  But maybe I am lucky.  If a user updates a closed block, they will receive an error message that I think.  They may try to update again after a few seconds, I hope.

  Thank you.

  Locking behavior for BSO Essbase is described in the database administrator's Guide: http://docs.oracle.com/cd/E57185_01/epm.1112/essbase_db/dstinteg.html

  It is certainly theoretically possible that a user can obtain a lock because of a calc, although I can't say I saw him be a problem in real-world applications (perhaps because access uncommitted is the default).

• EPMA Essbase vs Classic Essbase | Better question practice

  Hi all

  Having no formal training on the theme of EPMA, but with the experience of its use as well as planning, I am aware that the deployment in EPMA is destructive to all content created manually in the Essbase application under it.

  
  

  for example when you make manually added a full deployment, all calculation scripts will be deleted.

  I now questions about the EPMA Essbase applications:

  1. As is Essbase deployment similar destructive EPMA planning?
  2. All the contents of the application must also reside in the Manager of EPMA and calculation? Is it possible to use only the EPMA to control basic data and do all the other actions in Essbase?
  3. I see a real added value of the use of EPMA for one of my clients but if scared (I) may have to tell them to migrate all of their scripts of the Essbase administration console to the calculation Manager. As such, it will be difficult to find the value of the switch for them.
  4. What Essbase studio? I'm not aware of any need for Essbase studio as part of an implementation of planning EPMA, but what Essbase EPMA? It's a must-do, advised or just nice to have?

  Appreciate very much all the advice in this context.

  Erik

  Belgium

  It depends on what you mean by destructive, if you mean he suffers from the same sort of problems then Yes, personally I find it difficult to understand the benefits of moving away from classical way of maintaining applications essbase for EPMA successful world, just my opinion.

  You should be able to see using calc scripts in the same way as before and same goes for other features.

  Essbase Studio is required as EPMA uses part of the line of code to deploy Essbase applications.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Sends data Essbase BSO

  Good afternoon

  Our group currently uses cubes essbase ASO to do their planning and forecasting.  Data bases are mainly intended to be warehouses of data, users just want to be able to send their data and consolidated it on the fly, as they get them.  They do not want to perform calculations of database (we had cubes BSO years ago, but the time calc were too - that's why we went to ASO).  It works well, except that as you know, ASO sending is notoriously slow--it's getting to be a little problem.  Now, we have recently moved to the latest version of Essbase / Smartview and I was told that if you partition a cube a cube ASO BSO, you can send data to the OSB, and through transparent access partition by ASO and ASO aggregate child values in the OSB for parent ASO values when users make their retrieves.  Is this true?  If so, this may be a game changer for us.  I tried to do this before, but still had to calc the BSO cube first.  Can someone check it for me?

  Thanks and sorry for being long-winded

  Oh Cameron the error you see is to listen to me. In fact, I was going to put in the comment that you made about adding complexity to the equation having to send to a database but to report each other as much as before 11.1.2.3, you wouldn't be able to see the ASO cube within planning. you will need to use an Essbase connection in Smart View to get there. He has certainly material environment.

  As I said also kind of each environment is differenent. in the case of the OP, there need test what its users do and see which is the faster of the two. There are some efficiency gains in the partitions to bring in data blocks. The amount of data users send, the closer the two could be equal or one overshadow the other.

• EPMA Essbase requires Validation - an internal server error

  I created an application essbase 'TEST '. In Epma, I downloaded for the application dimensions and tried to validate the application. But when the validation, I get the following error
  "An internal server error occurred communicating with the server - URI: http://server.com:19000/awb/integration.verifyApplication.do.
  "Status: 500 - internal server error".
  Could you please help me to solve the problem.
  
  Published by: Satheesh S July 31, 2012 08:19

  Hello
  I am also facing same issue in the deployment of the Application of EPMA Essbase.
  I installed Essbase Sudio Console of the file customers installers. but problem not solved.

  Should we install Essbase Studio also using Configurator EMP?

  Kind regards
  Mady

• How to load text to member values in essbase/planning? (datatype = text)

  Hi all
  
  Has anyone faced the problem of trying to load data to the members defined as a text data type? You have done this thru smartview, or did you use something more complex, like SUN using planning adapter?
  
  The user has the possibility to enter data for this member planning Web form and get it back, but we were unable to load data from a file.
  
  We first tried to use excel add, until we discovered that essbase stores not really text for the Member, but instead, it stores a reference to a relational table planning, where the text is actually stored. Thus, we try to use smartview to connect to the planning application and load the values for this member, but we have been unable to do.
  
  Due to operational requirements, we are unable to use the planning cell text feature. We actually
  
  So, shed light on how to solve this problem? have you used a DIM as ODI ETL tool to load in the planning? Use a Api?
  
  Any input will be greatly appreciated.
  
  I forgot to mention that we use planning 11.1.1.3 and EPMA.
  
  Published by: user8722412 on November 4, 2010 18:33

  ODI can certainly do it, but as you use EPMA, it should be a no usual route.
  You might also have a look at the utility of charger of contour that can load data from text, not sure on how it validates if it is an application of epma but always worth a try, have a read of:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch05s02s01.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• creation of planning using dimensions in epma essbase application

  Hi guys,.
  
  I already create an empty application in planning using epma. I have load the essbase application in the console of shared services and I can see the essbase application in epma. My problem is how can I use the essbase application to load dimension in planning?
  
  
  Does anyone have any ideas? Any response is highly appreciated
  
  
  
  Thank you
  Hanson

  Hi Hanson,

  One Option would be to be extracted the essbase outline in the text (preferably in Parent child format) through outline Extractor (available on internet) format and then use this file extracts to create the dimension of epma and then load in the planning application.

  Concerning
  Atul