EPrinter HP Envy 4500 Scan of the computer (HP Pavilion 14 Chromebook) / E-Mail?

Similar Questions

• 120 envy: envy 120th Scan of the computer cannot be activated MAC running El Capitan

  Hi guys,.

  I recently installed it all above named mentioned HP printer software but for some reason, I can't Scan for compatible computer.

  I need to work in order to scan a batch of documents and consolidate in 1 file.

  The native application of the Mac scanner handles scan page by page and saves it on my desk. but I really need the batch option to work.

  I followed all the standard procedures to reinstall the software, resets etc, but I'm still having the problem.

  Under the HP utility screen, I have the scan to computer option on the bottom of the menu. I click on that and extract information. Then I get this message as well as the red dot

  "The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I made sure all the software is installed and I still have the same question.

  I can connect to the printer and scan of the web also. I just seems to be a problem with the HP utility App and the printer.

  Any advice would be appreciated.

  Thank you very much.

  Paul.

  Hi Paul,.

  Download and install the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Then, open the HP utility and try to activate the Scan of the computer again.

  Please let me know the results,

  Shlomi

• HP ENVY 4500: Scan the form of the printer for computer

  Attempt to analysis of a document from HP ENVY 4500 to my Dell computer.  Says that I have to synchronize but do not know how...

  Hello

  Have you installed the software and drivers on your computer again. If so, please try

  Double-click the icon of the printer on the desktop,
  Select manage the Scan of the computer
  Click Enable-
  
  You can start automatically with Windows, BUT you will get an arror message if you turn on the computer FRONT of the printer.

  Kind regards.

• HP envy 5530: impossible to activate scan of the computer!

  I have a macbook air and I wanted my hp 5530 for a few years and it has worked very well. Then I was unable to scan directly to my macbook, so I followed the instructions of troubleshooting - uninstalled the hp software and then re-installed. After the 3rd re - install, scan to computer worked for a day and now I can't do it again!

  I can't check the box 'Enable the scan of the computer' in the hp utility - WHY? Can someone help me please no copy and paste the instructions of troubleshooting, I read the already. What do I have to uninstall and reinstall again?

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• HP Envy 5660: Win 10-5660 Envy - Scan of the computer is enabled no longer

  I understand that this has been reported several times by others.  No proposed solution does work for me.  Periodically, I get the error message "Scan of the computer is no longer enabled.»  The network connection to the printer has been lost.  This started only after the upgrade to Windows 10.  This is a false message I still able to scan from the printer.

  I uninstalled and reinstalled but false error notifications always appear.  I can easily disable scan of the computer in the management of the scanning and uncheck the box there.  There is a work around.

  Is - this position of HP to use the autour work and waive the functionality of scanning directly from the printer?

  Thank you.

  Hello

  Thank you for using the HP Forums.

  The pop-up message occurs because the software is not able to detect the Scanner (because the Scan of the computer is activated).

  Win 10 uses WSD and WSD is maybe not as reliable (where the popup).

  Maybe you can try a TCP/IP port?  What could reduce disconnect it temporarily.

  Can you try using a TCP/IP port?

  Creating a TCP IP port:

  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  This video resource will show you how do:

  Create & port use TCP IP

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Let us know if it works.

  Otherwise, if you do not use the function "Scan to Computer" regularly, you can always disable.

  Thank you.

• HP ENVY 4500: Scanned image appears in several parts of the whole.

  Hi people, for convenience, I'm going to number paragraphs describing my problem.

  1. any new product, which was to install a couple of days.

  2. the product prints and copy great and no problems. However, although yesterday I scanned a picture OK, now not so much.

  3. I hate to admit it, but I am 81 and my memory is not so great. Perhaps, I do not use the Protocol? Here are the details of the problem:

  4. when I scan using the screen of the printer the printer allows to scan that a good connection to my computer and an appropriate message is displayed on the monitor screen "Scanning". When parsing the result image is sent to the 'Documents '. So far, good.

  5. what analyzes all the I go to Documents and find the split image in ten 10 or more separate items and it would be a major task using PES or similar to the room together. In any case, would not be a solution, the photo scanning in a room, that's what I'm aiming for.

  6 but it is not the end of the problem. When I scan using the computer all scans correctly and is displayed in the preview window, which appeared on my screen. But the 'same' problem persists as above and the scanned image in appear in 10 or more parts at all.

  7. I don't think that there is nothing wrong with the product, rather I strongly suspect that I'm doing something wrong or maybe I misconfigured Setup.

  How can I fix this problem? What should I do to scan photos and documents as an image or a document and not 10?

  I'll be very grateful to help on this problem. Thank you very much. If you need more information, please just ask.

  Stehkoyeh.

  What follows is HPENVY4500 all_in_one printer, scanner, copier and fax. Professor, thank you very much for your help. However, I managed to fix my situation with the changes as follows:

  1. in the hp/scan utility on the computer. I clicked on the Scan of the computer and then the change analysis tasks...

  2. This was brought up in a popup window. I then put 'photo jpeg' highlight and click on modify.

  3. This brought another window. This is the important part. I've changed the menu presets "Photos, graphics, etc." and then that immediately under this Type 'exit' I've changed to read JPEG.

  4. everything that sounds very complex and I know I got lucky to fall on this procedure, because I'm good technically not for sure!

  However, the procedure above fixed my problem and my scans to and from the computer using Direct and wireless network were quite normal and very good. The scans are clear and bright and crisp colors. I am now very happy.

  As for the solution "self-cultivation", I'll certainly store that is far away and use it if you need. Although it was not necessary for my problem now, it's a very important protocol worth remembering.

• When I told him to turn on the scan of the computer printer, it says it can't

  HP Photosmart 5510 scan to computer Dell Windows 7

  When I try to scan it is not computer.  When I go to control panel and open printer tell him told him it cannot activate.  I recently paid Panda Security $150.00 to fix this and I still have the problem.

  Hello

  My suggestion: allow from your computer and you'll have more options of its software too. Please try (Windows):

  (a), double-click on the icon on the desktop.

  b click on Manage scan of the computer,

  (c) allow.

  Kind regards.

  PS. $150 = price of a new printer.

• Start scanning from the computer?

  I have a hp photosmart C5550, when I try to scan to start the scan of the computer says, how can I do?

  Antal Hello

  That article and the instructions are for a different printer and software. You should see 'Manage Scan to Computer' under the 'Actions of Scaner. If you get an error or messages let me know. I noticed you did another post where you mention Windows 7 which is your operating system?

  How to scan from my computer. How can I activate my HP 3050 scanner? Windows 7

  

• "The scan of the computer is enabled is no longer" false error

  Hello

  I bought and installed a HP DeskJet 3521. It is configured for wifi connectivity to two computers on our home network. A laptop computer is 8 64-bit Windows. The other is Windows 7 Pro 64 bit.

  The printer seems to work perfectly. However, the driver regularly (as in all the several minutes or so) pops up a message saying "the Scan of the computer is enabled is no longer" or something like that. It is apparent from the system tray. It fades after a few seconds. Otherwise the printer seems to work very well. This happens on two laptops.

  Laptops are in the same room as the printer and the router. The signal strength is high.

  Why did this message occurring and is there a solution for this?

  Thank you

  It is very probably the same problem I had with the HP printers for years.  It happens when the printer goes into a power saving sleep state and falls of connectivity.  To resolve the issue, you have to walk on the printer and the power of the cycle.  It has NOTHING to do with your router or static/dynamic IP allocation.  It's the fault of crappy entiely firmware and HP software.  HP 'experts' are playing the same game of blame-the-other-manufacturer or blame the old user that HP has always played.

  My current HP printer is the third HP sub-standard product I've owned... on three (Yes, I know, shame on me twice).  I've owned a high-end, expensive laptop which overheated during playback of a video to youtube and two printers which disengages automatically when they entered in the mode 'sleep'.  It will be the last HP product I already own...

• How can I enable scan of the computer

  My printer tells me that my computer is not listed. How can I enable scan of the computer

  Hello

  Double-click the printer icon on your desktop.

  In the new screen, click "manage the scan of the computer.

  In the new screen tick the Automatic start scan of the computer...

  and click on the Activate button.

• OfficeJet 7612 scan to the computer (RESOLVED)

  I wanted to just let everyone know if they have a problem with the inability to scan from the printer to the computer you need to install the NETWORK that this feature does not work on USB.

  1. install the printer on the 'network '.

  2. open the HP software

  ' 3. in the category scan search for ' manage the scan to the computer.

  4. turn on the scan

  Now on the device (scanner/printer) try to scan and you will notice that it will work...

  hope this helps everyone.

  True that the method USB does NOT appear the analysis of management for the computer zone

• OfficeJet pro 8500: Officejet 8500 scan of the computer

  I try to use the scan to computer option.  The scanner sends me this turn on my computer and I don't have the software and it can not find anywhere...

  This site has me fired everwhere and in circles.  The assistance Center has only notified me that I am not under warranty... I know that!  How can I get the software?  That's all I want.../cry

  TIA.

  Hello
  
  Thank you for using the HP forum.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/identify?q=8500+Pro & Tool = s-002 #Z7_3054ICK0K8UDA0AQC11TA930O2

  Please select your correct printer model, Win 10 people system and FULL of features before you download and install software.
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer
  
  To scan from printer to computer, you need to install the printing software full of features first.
  Once you have installed the software,
  
  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3. make sure that 'enable' the Scan of the computer. Also check the tab "Automatically start Scan of the computer when I connect Windows" is to check if you want to have this feature permanently. (an example is shown below)

  

  

  Hope that helps.

• HP Deskjet 6700 Premium: Scan of the computer no longer works

  When I run a scan of my printer to the computer, I get an error message that says that there is no connection, or that the application of scanning the computer is currently in use.

  I can Scanner normally when you use the HP Scan SW initiated from my computer. I can Scanner normally the printer to a memory device to the printer.

  The HP Print & Scan Doctor SW says that everything is OK and day.

  Any ideas?

  Hello
  
  Thank you for using the HP Forums.

  YUO must ensure that you have the FULL features software installed first and then turn on computer scanning.

  If you have not installed the software FULL of features, the following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  How to scan to computer
  
  Once you have installed the software:
  
  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)
  
  Scan to computer

  If it does not, we suggest that you uninstall and reinstall the software features FULL.
  
  Hope that helps!

• Scan of the computer cannot be activated.

  HP Photosmart Pro N911a 8600

  OS X 10.8.3

  I'm unable to scan from the printer on my Mac.  The Mac does not appear on the list of available devices ' scan to ' on the printer (although my other Windows computers do).  Enable the computer to the printer utility analysis does not work.  I get the error Scan of the computer cannot be activated ~ unable to communicate with the device.  I uninstalled and reinstalled all the software and drivers for the printer.  I have also tried to enable sharing on the Mac, but still does not work.  I can do EVERYTHING else very well including the analysis of computer to the printer.

  Hello

  Please go to System Preferences > sharing.

  Ensure that the computer name field is set and include only English characters...

  Otherwise, click on modify and change accordingly.

  Now, restart your Mac and check differences while allowing the Scan of the computer.

  If the same persists, click on the Apple icon, install any available software update and see if that can help you.

  If there is still no try to change reset the printing system, then reconfigure the device by following the HP Installation Wizard (under Applications > Hewlett-Packard > utility device) and look for any change.

  If there is still no change, remove the software by following the HP uninstaller program.

  Then go to computer Finder > Macintosh HD > library > printers and move the HP folder to the trash.

  Open the PPDs > contents > resources. You can search the 8600 folder and remove its pilots in the trash.

  Fix permissions of the drive as follows to avoid any possible permissions problem:

  Hello
  Follow the steps below to repair disk permissions:
  
  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Finally, reinstall the latest version of the software below by selecting the recommended HP software:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107214-1&cc=us&DLC=en&LC=en&OS=4142&product=4323659&sw_lang=

  Shlomi

• Cannot scan to the computer. Photosmart 6510

  I have just purchase a photosmart 6510 and I cannot scan to the computer.  The printer tells me that I need to activate this via the printer software.  I know that I have installed all the software from the disc supplied.

  I can't find where I have activate the scan of the computer on my laptop.  Support information tells me to click the icon for the printer to my desktop, I do not have!  I tried going through the control panel and impossible to find something there.

  I go in the HP folder in my Start menu and click on scan HP that I get the following message "the machine HP photosmart 6510 series is not found".  I don't have a problem with printing at all.

  Tried to start printing and scanning of doctor and who did not make a difference. (In fact, the scan option came not on it).

  How can I fix this please?  I'm running Windows Vista Home premium.

  Hello.  Thanks for your reply.

  I've sorted really the problem now.  But let me explain what it was.

  I tried tool doctor who recommended you after browsing these forums, without success.  In fact, when I ran the scanner, he told me that he had no problem with printing, but there was no mention of the scanning anywhere.

  In fact, I uninstalled all HP software, removed the printer from my control panel.  Then reinstalled the software from the disc and then installed the printer again (I did things the opposite of the front walkway).  And the scanner function now works.