Epson CX6000 Scanner does not install

Similar Questions

• Epson v500 Scanner does not work after driver update!

  I recently bought a V500 photo and scanned my first 35mm using Epson Scan v3.7.4 negatives. The colors seemed off so I download and installed the latest v3.7.7 of support to Epson.ca hoping that it might help.

  Following the upgrade of the driver, the scanner has stopped working! Loads of Epson Scan, but after 5-10 seconds, I get the message: "no response from the scanner. Make sure the scanner is turned on and connected properly. If you use the transparency feature, remove the reflective document mat. »

  Then I restored the latest install w / restoring Windows but still could not get the job to scan. I drove back to the pre - Epson scan install date and tried to reinstall the earlier version but still no luck to get scanner work.

  I then followed the steps of uninstall on the Epson.ca support site removed all the drivers and the software with the scanner turned off and unplugged. Then I reinstalled the old version of Epson Scan of the CD because he had worked at the start. I reconnected it the scanner it plug it in and turn it on. But it still does not work! Ditto for uninstall and reinstall with the latest drivers.

  Notebook P7350 using Windows 7 32 bit SP1. Scanner is connected directly on the laptop, not through a hub. I tried all 3 ports USB in the hope one would work, but no luck. All connections between the pc and the scanner seem robust.

  Any suggestions to get scanner work?

  Thanks for the reply of adeline. In the meantime, Epson come back to me when I contacted them again but only after I have disabled cookie blockers in Firefox when visiting their support site. The first time I've done this, and the support form has not sent correctly.

  It turns out that the scanner must be completely turned off and unplugged then reconnected after that driver installed. I discovered one of the records was not too tight that it should have been :-0 if I was sure I had checked it earlier.

  Thanks again.

• Acrobat 9 Standard comes with the scanner does not install

  My serial number for the grouped Acrobat 9 Standard is interpreted by Adobe as an upgrade.  I can not install without evidence of an earlier version - which, of course, I never had.

  The scanner is a Fujitsu fi-6230 (big machine).

  I have just upgraded to Windows 7 and need to reinstall Acrobat. Would prefer to save the expense of a full version - I thought to upgrade after installation of level 9.  But here I'm stuck on zero.

  All the words of wisdom would be appreciated.

  You can try to talk to Adobe Support by chat or phione to see if they can solve anything of it.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

  If the software is delivered with an upgrade serial number then your only hope is likely to be in contact with people from scan to see what happens with that.

• I installed windows 7 and now my canoscan lide 50 scanner does not work.

  I installed windows 7 and now my canoscan lide 50 scanner does not work. Anyone know if it will be a windows 7 update driver to resolve this problem? If this is not the case, what scanner in the price of $80 will work on windows 7?

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/1afc4c13-551e-4372-8ecb-c16dfbfd442f/

  Here is the solution for the LiDE 50...

• My scanner does not work after upgrade to El Capitan

  I got the upgrade to El Capitan 10.11.3 OX and since then my scanner epson XP-600 does not work.

  I have installed all updates for updated epson software. The printer is cause of work (I have them all in one), but not the scanner.

  I tried to do what other users have suggested as TWAIN devices reset but when I go to the Image Capture this choice is not given to me.

  I am totally disappointed with El Capitan, he even caused problems with my emails.

  Could someone please help since I'm on this scanner for businesses?

  Thanks in advance

  Apple is not responsible for ensuring that Epson provides scan to update drivers.  Epson is responsible for the update of their drivers and providing them to Apple, or publish them on their website.  Looks like the last update for the drivers scanner was on 09/07/2015 (http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=201987&infoType=Dow nloads & platform = OSF_M_X11).  The scanner is listed in system preferences/printer & Scanners.  I know that the printer is listed, but the scanner function is?

• Canon iR4750 with OS X10.11.4 scanner does not work

  trying to get my Canon iR4570 multifunction copier to work as a scanner.  I installed print drivers (UFRII) and it works like a full service printer but the scanner does not appear.

  Any suggestions?

  Have you tried scanning with picture Capture in your Utilities folder?

• DeskJet 2050 A scanner does not work

  I have windows 7 and have installed my all-in-one deskjet 2050A. My printer and copy works fine. My scanner does not work. HP scan does not work. Scan of Windows, irfanview will not work. I can see my scanner in the Device Manager. All the drivers are up to date. I have uninstalled and installed the HP software several times. The diagnosis of HP twain scanning utility, said component does not work correctly. I tried all suggestions please help...

  I don't know if your solution works.  My problem was that the drivers WIA, well installed, could not.  Once activated, everything works fine.

• Scanner does not work on HP Officejet 6500 Wireless with MacBook Pro

  I have the all-in-one Officejet 6500 wireless and print fine but the scanner does not work even after the implementation of suggestions on the Web site.  I recently installed Mac OS x 10.6.8 but I had the same problem with the previous software.  Scan worked fine until the last few months.  I get the message that "HP Scan Pro quit unexpectedly" or "Sorry, an unknown error has occurred", but no additional information.  I have re-installed the software HP twice but to no avail.  What can I do?

  Try the scan using the Image Capture in your Applications folder.  Click your scanner on the left side, click "Show details" on the bottom.

• code KB9811433 646 and KB981715 does not install

  code KB9811433 646 and KB981715 does not install

  Sorry, you have problems getting your patches installed. I have a number of things for you to look at.  First of all, your Background Intelligent Transfer Services set to Automaticand started and Windows Update ? You can check these settings by typing services.msc in the search box of the start menu.

  Sometimes in order to get patches to install correctly, you must perform these tasks manually.

  (1) Download Center to visit Microsoft: http://www.microsoft.com/downloads/en/default.aspx.
  (2) search for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB979309).
  3) click on the link for the download and then click on download and run.  You must accept the agreement and then click on continue.
  (4) repeat this process for each download of updates Windows could not install.
  (5) to rerun the update from Microsoft, click find updates.  If all goes well, it will show that you are completely patched.

  If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or erase viruses can prevent the installation of patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and then Quick scan (full scan takes a long time to complete). Try the patches.

  Barbara

• Scanner does not work for all users on the computer Windows 7

  Photosmart 7510 Scanner does not work.  My scanner has the habit of work.   Now it does not for one of the three users on my Windows 7 desktop.

  I spent over 3 hours on the phone with HP.   They had me restart the computer, Plug and unplug the printer, reinstall the software twice under different names. The software depending on what user id, it is installed under allows access to the scanner/printer to one or more users.  The scanner works with Windows Paint software for all three nicknames.

  HP response is that some user control prevents the scanner software, who used to work on all three nicknames on the computer, which now works on one or more of the users.  They couldn't tell me which user control need changing.

  The HP solution is to restore my system when I could scan for all users of three.   I don't want to do that.   Does anyone have a better solution?

  The real problem is HP error messages.   When I click on scan a document, there is no answer.  Nothing happened.

  Then I tried to scan using Windows Fax and Scan.   I got an error message which helped me locate the source of the error.   I was able to fix the problem without creating a new user account.  I had deleted bu error the file MY Document.   Restore this file fixes the problem.

• HP Officejet 6700 Scanner does not appear in Win 10 Aps

  Installed Win 10. Had to uninstall and reinstall HP 6700 JO to get scanner to work. Howecer, scanner does not appear in all Aps (Start menu). The only way I found to scan is to right click on the HP Officejet 6700, and then click Run as administrator. Which takes me to the HP printer Assistant I can open the scan dialog box.

  How to scan to show in all the Aps?

  Thank you

  Hi @SideSaddle

  have you tried this

  Navigate to C:\Program Files (x 86) \HP\HP Officejet 6700\bin

  Right click on hpscan.exe and click on "Pin to Start", now you should be able to run the scan directly.

  hope this helps

  Balance of payments

  Although I am an employee of HP, I speak for myself and not for HP.
  Say 'Thank you' by clicking the 'Thumbs Up' in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".

• HP 8500 A909g scanner does not work

  Recently my HP 8500 A909g scanner does not work.  I did not change my system.  I use Windows 7.  When I click on scan in the HP Solution Center, I get the message that the HP imaging device is not found.  Several solutions are listed I tried each of them several times.  I even uninstalled my all-in-one, downloaded the new HP software and re-installed.  The extended error message is 8, [(1.0,-2147221502)].  I'm addicted to the HP 8500 A909g wireless. Printing works fine, it will be not just scan and I desperately need to scan several documents.  Any help is greatly appreciated.

  Hello

  Thank you for reporting the issue. There are several ways you can scan from the printer

  1. ensure that you have downloaded latest software HP and installed it.

  2 to PC, launch HP printer application (start-> program files - HP-> model-> printer model Hp series) or the center of solution and double click on the scan link to do the analysis

  OR
  3. a third of applications like paint program, click on file and choose Insert the image from a scanner.

  4. If it is connected to the network, then you can use your browser to scan, here is the video

  http://www.YouTube.com/watch?feature=player_embedded&v=HbWpgww5I-M

  If one of the above option does not work, then download the application print and scan of doctor and run it.

  Here's the site: http://ftp.hp.com/pub/softlib/software12/COL50849/mp-126353-1/HPPSdr.exe

  Good impression

• Photosmart D110 series scanner does not. Printer and copier functions work

  my HP photosmart series D110 scanner does not. Functions of the printer and copier are working.

  I downloaded and installed the latest upgrades to OS Maverick.  Any suggestions?

  Hi @B4inSF

  I can help you to scan to your Mac running 10.9.3.

  There is no full feature software and driver of HP, but the pilot of Mavericks v10.9 OS X for your printer is available through Apple Software Update (ASU).

  With this driver, you can still print and scan, you'll just have to scan from HP software. Scan to the computer from the printer control panel is available only when you use the HP scanning software, so it won't work because there is no scanning software HP as part of the Apple Software Update driver.

  Instead, you can scan using,

  • Method: scan from the print window & scanning

• Canon mp530 printer/scanner does not work since the latest version of windows update

  from the windows of the last update my printer scanner does not work. He says I have no installed printer. even if its there in my device list. Ive spoke at length with Canon support and they are sure it's a matter of windows.

  any ideas?

  Hello

  After windows update did you check in Device Manager is there any yellow mark on any driver?

  Go to the device by right clicking on computer Manager and manage

  Right click on the yellow camera brand > properties > details > click on description of the device > select hardware ID

  Let windows to be opened and take note of the VEN ID and DEV ID

  Go to the browser and go to Pcidatabase and put the VEN ID and see who exactly the driver required

  Look for the driver at Google or bing or other for a good

• scanner does not work because no request for communications

  HP PSC 2410 Photosmart all-in-one.  MAC OS x 10.6.8 I just install this operating system upgraded and now my scanner does not work.  The printer works fine.  But when I try to scan, I get ' HP communications application does not. "  Click on restore. "Several times and nothing happens.  I can't find a call for papers anywhere on my computer.  Downloaded again software of hp, but this is not good.  Through the permissions of the drive and all other proposed on the hp website, but not luck.  Help!  Mary Hayes

  We will restore the system again:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.