Epson printer driver does not appear in the printer & Scanner window

Similar Questions

• Satellite A100: CD/DVD drive does not appear in the Manager of peripherals and BIOS

  The CD/DVD drive does not appear in the window manager and I can't incert CD
  The BIOS displays "none" instead of "optical device".

  This means that the CD device is dead?

  Hey Micky,

  Unfortunately it's probably :-(. You can try to remove the optical drive and then reinsert it into Notepad, and then marketing and see if it is recognized as a new device.

  Check also that it is not displayed in Device Manager and if it is remove before trying the above.

  Kind regards

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• Essbase Service does not appear on the list of Windows Services

  Hi gurus,
  
  I tried to install the Hyperion Essbase 6.2.4 on Windows Server 2003 version and most of the thing works except that the Essbase Service itself does not appear on the Panel of Windows Services, whether on the previous installation of Windows 2000 Server.
  
  I tried reinstalling the software but the problem is still not resolved. I need to have Essbase Service on the list to allow the availability of service 24 x 7.
  
  I know that the Essbase version is quite outdated, but I'd be happy to hear from you guys.
  
  All advice please?
  
  Thank you.

  In version 6, you need to set your ip to the service. Go to start run and type cmd and click ok
  Then in the command window type
  Essbase.exe - service installation and press ENTER. The device must install.

• DVD drive does not appear on the screen of the reader 'computer '.

  I lost access to the DVD drive. It does not appear on the screen of the reader 'computer '.
  It starts with a disc inserted, but stops after about 20 seconds without opening all files.
  The DVD comes on when it starts first and then turns off after a few seconds.
  I have re-installed the driver of Toshiba and still no access.

  I think it all started when I installed a new WD 1 TB external hard drive which its virtual CD drive on the E: drive, which was used by the installation DVD player. I moved the external hard drive G: and drive E: letter has left vacant, but still does not work.

  Any ideas how I can fix this problem? It would be greatly appreciated.

  Optical disc drive is listed correctly in the Device Manager?

• On an iMac 10.8 Flash drive does not appear in the sidebar on the finder under Devices window, now appears on the desktop

  On an iMac 10.8

  USB stick does not appear in the sidebar on the finder under Devices window, now appears on the desktop

  This just started for no reason

  Finder > Preferences > sidebar.  Scroll down to devices.  External drives is checked?

  

• My cd drive does not appear in the my computer list. Œuvres to eject and it looks like it works.

  Under my computer, Miss me my CD card. I hear the CD player to make the noise, but it will not be displayed on the screen. So I can't read CD that I saved the material on. My Dell is only 3 years old. Maybe bad CD player already? Can you help me? Thank you

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The previous computer's internal drive does not appear on the current computer

  I have an old hard drive of my days of windows XP.  I plugged on my current computer about a year ago and I was able to access the drive.  Recently, I reformatted my C drive, and I am more able to access the external drive now from a previous computer.  Nothing happens at all.  It does not appear in the computer file.

  The first step you should take is to enter the BIOS Setup program and check if the disk is visible there.

• Hitachi Touro Desk pro HARD drive does not recognize on the computer of Windows 8.

  Original title: Windows 8 - Hitachi Touro Pro support

  I have a Hitachi Touro Desk pro HARD drive that no longer works since I've upgraded to windows 8 last week. If I leave it connected during startup, windows will not start and if I connect it once started, it does not appear in the Solution Explorer, even if you can hear the disc turns away.

  The HARD drive works on all other computers and operating system, not just windows 8.

  When Microsoft will release a patch for this problem? I really don't want to have to re - install windows 7 so that I can access my files again.

  I have installed Windows 10 Technical Preview version 10049 and connected my drive from 750 GB Hitachi touro in USB 3.0 and it WORKS!

  I can't believe that after several years of frustration with this device with Windows 8.1 incompatibility it finally works great in Windows 10! Please check if you also have Windows 10 TP if your Hitachi drive works as well

• Hard drive does not appear in the preferences?

  Hello

  I have an external hard drive that I want to use as the scratch disk in photoshop, but it does not appear when I open preferences > performance? My other two hard drives that are connected and mac HD appear well?

  This external drive is properly formatted as a Mac OS Extended ?  It should not be formatted as logged, but it MUST be Mac OS extended.

• hard drive does not appear in the finder - but on desk

  Hello Hello,

  So I did some mess and it would be wonderful if you can help.

  I tried to make the 'see' an external drive using the privacy setting, but I managed to do away

  ear of the finder. I can see and use it on my desktop and utility disk, but it does not show in finder. What I did do, and how to fix it please?

  Thank you!

  Try to eject, and then unplugging the drive and in him plugging.

  Did it solve this problem?

• Drive C does not appear in the computer management window.

  Hello

  In the window of the computer storage management > disk management, I have see my drive C. CD - DVD drive and an external DVD drive only is displayed. C drive is not there. When I look under the disk defragmentation, the C drive is.

  What gives?

  Thank you

  Hello

  Use the Diskpart utility and check if it lists the C drive. Thelist volume command will provide information about each volume in the computer.

  a. Click Start and then click Run.
  b. now, type cmd in the text box and press on enter to open the command prompt.
  c in the command prompt, type diskpart.exe press ENTER.
  d. Enter the following command in the utility diskpart and press ENTER:
  the list volume

  Check if drive C appears in the list.

  See this article for more information about the Diskpart utility:
  http://support.Microsoft.com/kb/300415

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ODBC driver does not appear in the drop-down list

  We have created a system DSN by using ODBCConfig Unix and the drivers supplied by IBM in its iSeries Access package. We are trying to connect to our AS400. We now have Coldfusion installed on SuSe 9.3 Open Enterprise Server. ColdFusion is running well. When we try to add a data source in the ColdFusion administrator, the pilot of the system DSN that we have configured does not show upward in the drop-down list. We missed a step? We did it with this success with coldfusion on Windows 2003 server.

  Doyle,
  I sent you an e-mail, but yet again, I thought you were under Windows. However, if you're on Linux, then JDBC is your only choice and ODBC socket is not available in ColdFusion for this platform.

• Corsair Flash Voyager GT 32 GB USB 3.0 thumb drive does not work after the upgrade to Windows 8 Pro

  Hello

  Since the upgrade of my Windows 7 Ultimate SP1 x 64 Windows 8 Pro x 64, my Corsair travel GT 32 GB USB 3.0 Flash USB key no longer works when plug it into my USB 3.0 port on my laptop. I get an error that the "peripheral last USB connected to the computer has malfunctioned and Windows does not recognize it." I looked for someone with a similar problem and came across this answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Sony-microvault-USB-30-8gb-thumb-drive-not-working/8815a9bd-ee62-41EC-8116-a2a03d6f2bbf

  I tried the solution (method 1) on this page, however, Windows reports that it was unable to solve the problem of equipment.

  Is there anything else I can try to solve this problem? The USB key works in the USB ports 2.0, and it worked in the USB 3.0 port when you run Windows 7 Ultimate SP1 x 64.

  Kind regards

  Andreas Ball

  Hey, I contacted Corsair about this, and they say that it's a driver problem in Windows 8 and I need contact my laptop computer manufacturer for the latest drivers for it, but even if my manufactuer are full steam advertising upgrades of Windows 8, they say they do not support it fully yet...

  The host controller my laptop use of USB 3.0 is 'Renesas Electronics USB 3.0 Host Controller'.

  Through Googling, I noticed others have had problems with this host controller in Windows 8, and I can't seem to find a solution for it yet.

  Unfortunately, windows 8 compatibility is not listed then try to install the installer of renesas usb 3.0 in windows compatibility mode 7.

  complete list of supported products and the operating system:

  http://eSupport.Sony.com/us/p/SWU-matrix.pl?upd_id=6382

  Renesas Electronics USB 3.0 Host Controller®
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCL213FXB&upd_id=6382&os_group_id=6

  Download here: http://s02.download.sony.com/US/pc/RNDUSB-00241028-0042.EXE

  What does this do?

  This utility installs the originally shipped version of Renesas Electronics USB 3.0 Host Controller driver.

  This driver also solves the yellow exclamation point error that can appear in the device as "Universal Serial Bus (USB) Controller" Manager that indicates that the driver is not installed for this device.

  The products and operating systems (view all...)
  Model:
  VPCL213FX/B
  Operating system:
  Windows® 7 64-bit

  IMPORTANT: This file is only for use with the identified models. Not all models are sold in all countries.

  Important notes

  During the installation of this file, be sure that you logged in as an administrator or as a user with administrative rights. To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. It is strongly recommended that you print these instructions for reference during the installation process.

  Download and Installation Instructions

  To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. Download RNDUSB-00241028-0042. EXE a temporary of the file or download directory (Please note this directory for reference). Go to the directory where the file was downloaded, and then double-click RNDUSB-00241028-0042. EXE file to start the installation. The "User Account Control" screen, click 'yes '. On the screen "Select Country", select the country for the installation and then click on "next". To the "Renesas Electronics USB 3.0 Host Controller version 2.0.26.0" screen, click "next". The "License" dialog box, read the contract, then, if you agree, click "I agree" to continue the installation. The "Complete" screen, click on "Finish". Installation of the Renesas Electronics USB 3.0 host controller is complete.

• The Web site address does not appear on the pop-up window

  Hello

  I am running Firefox 19.0.2 on a Win 7 64 bit PC version and have noticed that on the pop-up windows, when the address bar is present, I get the message "go to a Web Site" on it rather than the address of the Web site. If I click with the right button on the icon of the little world on the address bar and choose Customize and then close this window without making any changes, the address of the site is full. Does anyone know how to get the address of the site to automatically display on the popup? My PC Win XP Pro is not this problem and popups always display the address of the Web site without having to do anything.

  Thank you

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes