Epson printer utility set up error 1131

Similar Questions

• Epson stylus nx130 printer doesn't work (error - 0 x 00000003)

  I just installed a new printer (epson stylus nx130) I am running windows 7, 64 bit...  (error - 0 x 00000003) this error came when installing... Finally this corrected after installing and reinstalling several times.

  printer installed by using disk. CAN PRINT TEST PAGE... PERFECT

  tried to print something and the error message says "Please download update module easy print"... had a look in Device Manager, there was a small blue question mark next to the printer icon. clicked on properties... apparently this device works.

  tried to print again, this time error message was "printer driver is not found" (error - 0 x 00000057)

  went on epson site and downloaded the printer driver for 64 bit... installed as in a dream.

  tried to print again... shows document sent to the printer, but then stops. I opened to the top of the queue of the printer and next to the document ready to be printed it displays "error - printing"... but don't tent not even print the printer... is as quiet as a mouse. "."

  I uninstalled and reinstalled... out the USB and reconnected it. windows update... has opened the printer info, and he returns with 'communication error'... It also shows ink separated 4 tanks... but they are all displayed as empty... I just brought them all, so I know that they are full.

  What else could try, runs it explode?

  Hello

  1. What is the number of brand and model of the computer?

  2 have you contacted the manufacturer of the printer to this topic?

  Follow these methods.

  Method 1: Run the open printer troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  
  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 3: Printer may be in conflict with certain programs on your computer. I suggest you to set the computer to clean boot and check how it works.

  View the following command to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After a repair in the clean boot state, follow step: 7 article to reset the computer in normal mode.

  Let us know if that helps.

• Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  [Moved from the community centre of Participation]

  Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  What is the model of the printer?

  See related thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/escndv-is-incompatible/a1521e27-f6dc-4c9c-B990-b98c721c74a1

  Have you tried to install the drivers using the Compatibility Mode?

• run dll error on epson printer uninstall software

  try to uninstall epson printer software get runtime dll not found error

  Hello

  Try this free Revo program to remove it.

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  See you soon.

• HP Envy 120 printer prints OK but the error message after each document

  After upgrading the firmware in my printer, I now get a window pop up with the title, "Unable to communicate with printer" at the end of each document.  The error message should be cleared before the next document in the queue will print.  Each document prints correctly despite the error message.

  Another thing that may cause this condition besides the update of the firmware is this: I have set up my printer for wireless printing, which worked OK.  However, I am currently using the printer with a wired USB connection.  Of course, the version non-reseau of the printer is selected as my printer 'default' regarding this error report.  The update of the firmware was held at the same time that change this "setup".

  Hey @rrbNevada,

  Welcome to the Forums of HP Support!
  
  I understand that your printer HP Envy 120 seems to have an error "Unable to communicate with the printer" after each print job is printed and this problem seems to have started after an update of the firmware running and change your connection type. Maybe it's a coincidence.

  For me to help you I need to know what operating system you print since?

  What is my OS?

  For now, I would like to run the print tool HP and doctor Scan. It is a practical tool that will 'fix print' questions automatically for you. It will scan the computer for any conflict of driver printer HP, connection problems and other issues that can cause problems with your printer. It will also try to fix these problems for you.

  HP Print and Scan Doctor

  If printing HP and doctor Scan fails to solve your problem, I recommend a complete uninstall and reinstall of your software and drivers for a clean slate to work with.

  Uninstalling the printer software

  After you have uninstalled the drivers and the printer software I need you to reinstall. To reinstall, I add two documents of reference below:

  Installation for USB under Mac OS X

  Installation of USB on Windows

  Because you use the printer for network and USB connections on your computer I suggest you first run installation from USB.

  Once the printer is installed for USB, then you can add in the wireless version.

  Adding a printer wireless on Windows:

  1. open the Printer Assistant software on your desktop. It should resemble a black printer icon and has your options of Scan inside.

  2. click on the 'utility' on the top tab

  3. click on 'software and configuration of the printer.

  4 enforce "connect a new device" for the network connection.

  This will add two copies of your printer and both will be implemented properly for scanning and printing.

  Adding a printer wireless on Mac:

  1. Click The HP utility icon in the Dock.

• Epson print driver changes both margins to address for the envelope printing. Three other printers print the addresses of envelope with correct margins.

  I bought a new all-in-one Epson Wireless WF-3540.  So new Epson technical support people had one to test my problem.  I like it a lot because it has two trays cassette for 250 pages each, and a page break back.  For the love of the work I do in this description I use the back form feed on the Epson only.

  Suppose I have a business letter in Word 2007 using Windows XP Pro.  My default printer is a HP 932 C.  I click on Mailings, Create, envelope and print it.  The result is the number 10 envelope with the address of the left retour.3,.3 of the top and the address of destination 2 inches high and 5 inches from the left.  Exactly the way I want it.  A selection button.

  Suppose I have install the new Epson WF-3540.  I opened the business SAME letter in the same Word 2007 using Windows XP Pro.  This time around with the Epson WF-3540, I followed the same procedure for click mail merge, Create, envelope and print.  The result is an envelope of number 10 with the return address 1.5 inches from left to right top et.4.  The destination address is 3 inches from the left and the top 2.25.  The non-professional delivery address looks and interferes with the USPS standards.

  I worked on the problem for two days.  I was on the phone with Epson for a total of four hours.  Here are the various attempts to set this right using the Epson WF-3540.

  1. in the Ribbon to create open envelopes, click options, and set the margins for the return and destination addresses as I would like.  I always use the et.3 valeur.3 return address and the destination address in 5 and 2.  I put these values in the options, click OK.  Print the envelope, and it is printed as I've described above with Epson.  In looking at the options for envelopes that they were changed to Auto.

  2. I have a test with the help of the same letter of businesss, Word 2007 and Windows XP.  I set the default printer to the HP.  This time I select envelope, add to the document.  I see an image of the envelope, watching leaders aside, it looks I want.  I close Word 2007, without saving the changes.  I have change the default printer to the Epson, open Word, the same letter from the company and select the envelope in the document.  It seems to appear in the same strange settings how it prints.

  3. I tried to change the margins of the envelope in the document with Epson as default.  When I try to print it throws an error telling me that I am trying to print outside margins.

  What are the effects of the behavior of the default printer?  Why the change in the appearance of the envelope both printed and in the document when I change printers.  What does the print driver? has to do with the formatting?  The installation of the Epson gives something in the registry that control margins almost anything.

  Epson told me there is no problem, but they are ready to buy the printer back to me.  Remember that they don't even have one to test on.

  I tried adding some dummy printers, without the actual printer and using the drivers only.  For example, I added an Epson ActionLaser 1100.  When I set it by default and use the same letter sales and Word 2007, I click on the envelope and add it to the Document, the addresses on the envelopes are exactly where I wait until they are, using the ruler on the side.

  What is - this subject a new printer is to control this mess?  I'd love to keep him.  I do a lot of letters and need the rear feed and must be able to one click printing envelopes.

  I had the same problem with my Epson WF-3540. Came to this site looking for the answer after the Epson site doesn't seem to have an answer. After reading the posts, I went to the printer, and I gave it a try more. I found what seems to be a solution but not transparent, that it worked.

  I noticed that when I tried to print the envelope property printer box shows the paper letter size (8 1/2 x 11) and not an envelope (#10). I changed the setting as the skin #10 and checked manually minimize margins. I then used the button Add presets save this as # 10 envelope as a new preset. This allows to print the envelope in the current printing of the page with the ability to use almost the entire surface of the envelope. You then switch to printing standard predefined when you are finished.

• I'm trying to print using my own profile and no color management.   I have found a lead to the Adobe Color Print Utility but reached a point where he declared that she would not work with future versions of the Mac operating system.   I have Mac OS 10,11,

  I have been printing PSD images with my own profiles and color management using an Epson R2880.

  I've now changed to a Mac with OO 10.11.3 and unable to replace the color management.   I found a lead on the Adobe Color printer utility but failed and got a message saying that the utility has only worked with an earlier version of the OS 10.   Is there a way to turn this problem?

  GHK

  You don't want or need to use the old setting 'No Color Management'. Is no longer the right way to print with a custom printer profile, in the current versions of Photoshop and OS X.

  To use a custom profile to print, use the attached picture settings:

  • In the print dialog box, set the Photoshop color management menu manages colors.
  • Select your profile to the printer in the printer profile menu.
  • In the settings of printer driver Epson (under Printer Setup button) make sure that the Epson printer driver is set to the color - off management.

  

  I don't know why Adobe Color Printer Utility works in 10.11.3, because I can throw on OS X 10.10 and 10.11. But in the end, it doesn't matter, because you don't want to use it for this purpose Adobe Color Printer Utility is only to print a profiling target, no images. And it won't let you print using your custom printer profile, because the whole point of the utility is to print with no discoloration whatsoever.

• Epson Print CD does not work with Airprint?

  I try to use Epson Print CD on my new XP Epson-630. When I select my printer, I get a warning saying: I can't print with Airprint, and I need to install an Epson driver. I have installed the Epson drivers twice now and reset the printing system about 4 times. Same caveat.

  I use El Capitan 10.11.3

  All solutions?

  I had this problem too. I've pretty much went through all the same steps that you did and I went through internet looking for a response to not available. I only thought of it by chance, just that my patience was key to its end. The solution is simple, but it is not clear.

  Follow the instructions on the next page to properly set up your XP-630 with Epson drivers. Basically, it is not a matter of just download the driver (who knew?). You must remove and re-add the printer from Apple settings, where you can select the driver instead of AirPrint manually.

  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/store/products/mainunits/FAQ/ 11941/5672

  Then - and this is what I've been hung up on for like an hour - the printer will disappear entirely as option in Print CD. You must select "Update printer information" in the file menu. He is never picked me up there; Only, I came across it by chance.

  

  I hope this helps! Good luck!

• printer utility is not open in mavericks

  Just installed a Laser Jet pro P 1102 W.Usb Airport Extreme.Unable to open utility printer or check the level of supply. The printer does not print. However, can't set up for wireless printing. Have the latest drivers provided by apple and use an Imac avecjoint/S Mavericks.

  Thank you

  Hi johnhikes,

  Welcome to the HP community! There is no software available for the printer Laserjet of Mavericks, which is why you can not open the printer utility or check ink levels. The drivers supplied by Apple are basic drivers. Regarding the wireless features, you need the software to configure it using the key to Airport Extreme USB is best option.

  Thank you

• Hello world. I, m Bengt from Sweden. Can, t connect wireless epson printer for my aspire m1.

  Hello world. I, m Bengt from Sweden. Unable to connect wireless epson printer for my aspire m1. I tried the drivers of each possible site, epson, windowsupdate and more with no success. Can you help me?

  Great! There is a material error in the printer! I'm going to usb it for now. Perhaps by a new printer, later! Best regards
  Bengt
  Thanks for a good and fast support!

• I have an Epson printer that will not print. Can you help me?

  I use Windows XP and printer Epson Stylus NX515.

  Hello

  (1) have you made changes before the start of this issue?

  (2) what exactly happens when you try to print?

  (3) you receive an error message or error code?

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  For reference: printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also manually download drivers for Epson printer from this link.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=128289&infoType=downloads

  For more assistance, you can contact Epson support

  www.epson.com/cgi-bin/Store/AboutEpsonConnection.jsp

  Let us know if that helps.

• "The printer is off-line" error when printing on Pixma 800 pix

  Original title: impression of the pix on Pixma800

  Print but the photos aren't. The error message is:

  The printer is offline.
  Check that the printer cable is connected and the printer is on.

  Hey guelphelf,

  Follow the two following methods to solve this problem.

  Method 1: Set printer online

  If the printer is offline, an error message appears and the print job will not end. So the value of the printer online by following the suggestions in the article below.

  Setting the printer online (Windows)

  http://support-SG.Canon-Asia.com/contents/SG/en/8200483700.html

  Method 2: Configure the driver to correct the printer port

   

  On the tab "Ports" of the "Printer properties" window, select the port for the printer driver.

  a. from the Windows desktop, open the printer properties window.

  b. click the Ports tab.

  c. below "Printing on the following ports" section, select the port to which your printer is connected.

  d. click on 'Apply' to validate the changes.

  e. click the general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  See how it goes.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Deskjet 3051 a model J611H: printer is in an error state

  For months after a cross-country skiing, I couldn't set up the function wireless on my printer (he had already worked with no problem). After a factory reset my router yesterday, it is finally connected to my home network. I tried to print a test page to make sure that everything worked properly and I got the following message on my computer:

  "The printer is in an error state. Please solve the error of the device and try again. »

  There is no error message on the screen of the printer itself, however. The menu normal forms of copy/scanning/quick is in place. The printer menus say he is connected to the network and gives me the IP address to which it is connected. I was able to print the 'printer status report"directly from the printer, so I know that it can print at least somehow.

  Is it possible to fix this?

  Hello

  You can see any difference using Jetdirect instead of Hello?

  Second step: print a Network Configuration Page

   

• Photosmart 2610 usb connected stops printing in the queue; error noted. IMac os 10.6.8. prints test page

  I used all-in-one HP Photosmart 2610 for years without change. Now everything is print spooling with non-descript "error" when it is in the queue. I can print the test page for the utility and I can print via the usb connection to my laptop which has supposedly the same software and updates. I uninstalled and reloaded the software updated and get a message that the software has been installed successfully. Install HP works OK and the dashboard widgit working to show supplies. But the printer in the printer/Fax preferences poster "information not available" when I check for supply levels.

  When I try to use the printer utility I get a message "some components installed on your computer have been developed for a different version of the HP utility. These components will not be loaded and some features related to your device cannot be accessed ".» I downloaded the latest version of the software and reinstalled my original software CD and cannot always my computer to print.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• How can I connect Epson printer by wireless to 2wire modem from Bell?

  Hello there, I would like to ask how can I connect my Epson printer to my new internet network from Bell? In fact, I used more then one of Rogers, their internet service connected to the decoder of Rogers cable, in the meantime, I used wifi router connected with printer, but currently, I went to the Bell company, Bell connect system is difference, their modem was Bell 2WIRE, they had wifi build in for all my cell phone in the House. Simply because with the new Bell network, I could not turn on my wifi printer, can everything you help me fix it? Please... Thank you and have a nice day.

  WinneTran

  Hi WinneTran,

  You can see the following article on the Epson printer on wireless network connection:

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

   

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.