EPSON Stylus T10 does not print with Windows 7 after works very well with Windows XP

Similar Questions

• Epson WF-7520 does not print to tray 2 after El Capitan clean install?

  I don't know what happened, but since I did a clean install of El Capitan, my WF-7520 Epson no longer works correctly. The ONLY way it prints on the 13 x 19 (tray 2) is when I remove it and place it in the top housing (slot 1). In addition, all my photo quality controls are now gone, so high quality prints are no longer possible. I tried to remove and reinstall the driver, but that has no effect.

  For what it's worth, I print using Adobe Acrobat DC of more Creative cloud products. Anyone know what can be wrong?

  Rest the printing system...

  Open System Preferences > Printers and Scanners and select the print tab.

  Right click or control your printer on the left, then click on: reset printing system...

  
  

  Then try to print again.

  If that does not help, download and install fresh drivers from the Epson website > http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?infoType=Downloads & oid = 183585

  A new installation can sometimes corrupt the software/drivers and need a new facility.

• iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

  IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

  How to solve this problem? Is there someone who has the same problem?

  Howdy,

  Thank you for using communities Support from Apple.

  I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon.

• If Firefox is the default browser, the links in the body of return Windows Live Mail errors that Windows does not find the URL. Links work very well if I set IE as default browser. (I use Firefox 10.0.2)

  The details are in issue

  Are you clicking on the links in an external program?

  Try:

  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

• Google product-i/google, gmail, etc. does not load on firefox, but they work very well on Chrome - that happened during the night - is taking control of google or hacker?

  I / google was my home page - one morning I opened FF and place comes TEXT - as a default text with html went. Do not remember if I had downloaded Chrome before or after that. I also tried YouTube and could not get my upcoming account. I created a new account gmail on Chrome and tried to access on FF and the loading screen came but FF could not load - expired - but the loading bar had no activity. In any case, I guess I'm not smart enough to understand. Someone else has reported this 'cover of google. I am a loyal fan of FF.

  Perform the suggestions mentioned in the last three articles provided in my previous answer.

• InDesign (just updated) CC does not open on Mac? It worked very well recently. I decided to update the CC, but that made no difference. Ideas?

  Adobe Creative Cloud

  reset your preferences - https://forums.adobe.com/thread/526990

• Installation of Adobe does not accept my password. It works very well for the adobe Web site.

  The title says it all.

  Installers generally don't require passwords (any more than Adobe applications).  If you are using a Mac, then it is likely, that the Mac is you asking to enter his password to go beyond his safety and allow installation to take place.

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• my hp 6500 has does not print with my laptop running Windows 8.1 (big difference)

  I try to print from a computer running Windows 8.1 to my HP 6500 has everything in a printer. It will not print anything except 6 x 4 photos. If you want to print a document on A4, I get the message of size mismatch. I tried on a second PC (with Windows 8.1) and it still does not print.

  Sorry I don't have a service manual for the 6500 has.

  Try to use compressed air to clean the inside of the 6500 a. (just in case it's dust)

• HP LaserJet 6 p printer range does not print with windows 7

  I installed the drivers that came with Windows 7, but the printer does not print. I run the diagnostic tool; It removes the work and says it's fixed.  It is not the case. HP says they cannot help.   I love my 6 p and would rather not have to buy a new printer.  Can anyone help? Thank you.

  Windows 7 does NOT support printer HP laserjet 6 p.  It is a HP note:models 6L and 6 p in the LaserJet 6 series are NOT supported in Windows 7  I got and downloaded the driver on the Internet somewhere by typing: driver of HP laserjet 6 p.  You can check the box to add printers over the Internet.  I'm not looking for the process.  Try and I hope it helps.  In the meantime, I'm troubleshooting why my 6 p prints (parallel to 6 p and USB for laptop HP cable).  Don't forget the impression of 'biodirectional' is not checked in Ports (USB001, 2 or 3) place (lower-left) in Device Manager. Right-click on your printer, you will see 'printer properties '.  I say that linear, but you will get it.  Let us know.

• Epson effective 435 does not print in El Capitan?

  Hi, I have recently updated to EL Capitan and attempted to add epson Stylus 435 with no luck. The problem is that it appears in the list of printers so I choose what it but then under 'use', I try to look for the model but number 435 was not found. I only see epson 24 pins series and epson 9-pin. I tried both choices of 24 and 9 series. My mac connects to the printer, but does not print anything. There is nothing wrong with the printer because when I print from windows 7 is very good.

  I also tried to connect my mac to the printer via the usb port and it's exactly the same as above, it does not list my model.

  What should I do?

  When you connect to this model of Epson, by network or USB, you should get a prompt indicating that a driver is available at Apple and you want to download. Given that this is not happening (perhaps due to a previous version of the driver) then you can download and install the package of printer Epson v3.2 drivers from Apple and then you should be able to add your printer.

• HP photosmart 8150 does not print with Vista

  Why my printer does not print how can I solve this problem

  The pilots say they work properly even though they may be bad drivers (not always, but often enough). You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers, firmware and/or software (and you should get those updates for the printer and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  The versions supplied with the printer are more likey obsolete and you want the most recent available.

  Do you get errors on the screen or on the printer (and what do say EXACTLY)?

  Pay attention to the installation instructions.  Not only certain tasks requuired, but sometimes they should be done in a certain order or the process will not work.  Check again the indications (or contact the HP support) and follow them to the letter.  Frankly, I would contact HP who willl be faster and much more liekly to work in the end. http://welcome.hp.com/country/us/en/support_task.html.  Why fuss about it when they will be more than happy to help you?

  I hope this helps.  Really shouldn't be much more difficult than with the previous printers unless you've never used Vista before - that can make a big difference.  Installation and configuration of sharing are very different.  Also, there may be some settings of the printer itself that need to be addressed to make things work correctly - but I do not (but HP will be).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Apps print does not print with eStation C510a. Draws thin line at the top of the page.

  My C510a eStation printer does not print using printing applications.  Only, it prints a thin line at the top of page.  Everything works fine until I feel.

  All other functions seem to work.  It prints computer via WiFi.  It prints when I send an email to it.  It copies via the Zeen.  It does not print using printing applications.

  Does anyone else have this problem?  What is the solution?

  2010-12-23 15:00.  I just got got off the phone with a HP engineer.  She said that the station is still in TESTING phase and to call to report problems, allowing them to improve the product.  (I thought that the product would have been fully tested before being released to the public!)

  She had me reset the zineb display by pressing the volume keys during power on.  This erases everything that had been done on the Zeen by me and gave rise to no HOME screens, which will need to be implemented by me.  The only application at the bottom of the blank home page was Yahoo!.  The app of the printer was still missing.  I had to move the tray app home page.  Now, I have to spend hours, once again, setting up the Zeen.

  After the reset, the printer apps seem to work now.  The Zeen will copy by using the application of the printer.  My computer seems to still be able to print and scan to/from the station.

  The printer station eStation C510a and zineb display are very exciting.  However, they are not for someone do not want to spend the time necessary so that it can work properly.  If you have a cell phone, be prepared to use a lot of minutes while on the support.

  The HP engineer said that soon will be a new version of Android on the Zeen enabling it to be faster.

  Note: I've updated the original post with new information.

• Brothers HL 2040 printer does not print on Windows 7/64

  Visited site of brothers and downloaded updated drivers, but still does not print. Any ideas? Winniethepooh

  Hi Winnie,

  Please contact Microsoft Community.

  It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. do you get an error message when you try to print? If Yes, what is the full and exact error message?

  Method 1:

  I suggest for the link and try to run the troubleshooter and check if it helps.

  Printer in Windows problems

  Check out the link for the printer drivers:

  http://www.brother-USA.com/downloads/default.aspx?PgId=1&R3ModelID=HL2040

  Method 2:

  I also suggest you to refer to article and check if that helps:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• HP Laserjet 1200 does not print in Windows 7

  I have a HP Laserjet 1200 connected via the USB port of a laptop running Windows 7, 64-bit.  I installed the driver 64-bit windows 7 to the printer through the Windows Update process.  I added it as a local printer as described in this thread.  The driver installs and seems fine.  (The icon of the printer under "Devices and printers" is another printer, but I don't know which is relevant).  When I try to print a test page or any other page, work flashes in the queue of the printer window and disappears quickly, but the page does not print.  I get no error message.  Any suggestions?

  Hello

  I suggest you go through the following link.

  Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also try downloading the driver from the manufacturer's website, install on your computer.

  You can download the driver from the following link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=29790&prodTypeId=18972&prodSeriesId=29789&swLang=8&TaskID=135&swEnvOID=4063

  You can also refer to:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer