Equipped with a sound card has lost after upgrading graphics card

Similar Questions

• Sound card error: there is a problem with your sound card

  I get the message "There is a problem with your sound card".

  This happened after that I think I uninstalled 'Realtek' by mistake.

  Could be the problem? If so, how can I recover?

  Reinstall the drivers for your sound card - looks like you might have uninstalled due to inadvertence their.
   
  
  --
  Richard Hay
  http://WindowsObserver.com
  Unofficial Microsoft and Tech evangelist
  "I'm a PC!"
  MVP Windows Desktop Experience

  "Namerof" wrote in message News: a18cdd27-8264-45a5-bf84-84ff03fb01b1...

  I get the message "There is a problem with your sound card".

  This happened after that I think I uninstalled 'Realtek' by mistake.

  Could be the problem? If so, how can I recover?

• How to make simple audio measures with a sound card?

  Hello

  I have audio simple (level, THD, frequency) of the measures in LabVIEW with a sound card.

  The audio signal is a sinusoidal 1 kHz analog single.
  I know it's better to do it with a real audio Analyzer, but it would be a significant investment.
  So, how can it be achieved with a standard of PC sound card? Thank you.

  I have a measurement of base (amplitude, frequency) with the following code:

  

• I HAVE NO SOUND ON SPOTIFY... IT ME SAYS THAT THERE IS A PROBLEM WITH MY SOUND CARD... HOW CAN I FIX THIS?

  I have no sound on Spotify... ItTells Méthéré is a problem with my sound card... How can I fix this?

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Cannot get any sound on my speakers after upgrading memory

  just updated my computer by adding more memory but I can't get any sound on my speakers

  Hi RawleHouston,

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not get any sound of your speaker after upgrading your memory. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. you receive an error code or message?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix the audio problems and audio playback:

  http://support.Microsoft.com/mats/AudioPlayback/

  Step 2:

  Follow the steps in the link below.

  No sound in Windows:

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  Follow the steps in the link below.

  Tips for solving common audio problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope that the information above helps you, and if you encounter any problems on Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Satellite Pro P300 has NO stereo Mix in Vista with Realtek sound card

  Hello.

  I have a P300 with Realtek internal sound card and drivers updated.
  I NEED a stereo mixer in the recording devices, but I currently get only a MIC input, even after checking "Show offline and disabled devices."

  Yes, I updated the drivers HD Audio of this site Web and Realtek and still nothing.
  The only other thing that could affect this, but I don't see how I use ASIO4ALL drivers audio in conjunction with the Realtek drivers.

  I'm running Vista 32 bit Edition Home Premium

  your

  Hi mate

  I confused m do you know why?
  Because you talk about audio driver Realtek and sound chip and my knowledge, that the Satellite Pro P300 was equipped with the audio chip Conexant!

  It s NOT the Realtek chip! It s Conexant!

  According my Conexant audio chip experience can't stand stereo mixer in the recording devices!

  Good bye

• I had a problem with my sound card

  Hello world
  I have a problem with my laptop. This morning, while I was enjoying my music (from media window), my friend called me by Skype. After that, my sound stopped working so far. I don't even know why. Y does it have that someone has the same problem and know how to fix? My laptop is a HP Pavilion dv6910us.
  I tried to download and reinstall the driver. But still, it says 'no sound card found.
  Thank you very much

  Try to download the driver and install it exactly as shown in the above message.

  You can also try a system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  HPKBDAPP.exe is part of the HP QuickTouch software.

  HP QuickTouch software
  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?cc=us&DLC=en&LC=en&softwareitem=ob-56178-1&JumpID=reg_R1002_USEN

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• ATTENTION TO DEVELOPERS - PROBLEMS WITH THE SOUND CARD

  I have a Focusrite Scarlett 18i6 audio card. I have before running on my Mac, version 5.0.3 (VMWARE) and everything worked. After that I updated to the new version 6 and my sound card no sound comes and has connectivity problems in windows. I updated the drivers for my Board to the latest version. I've upgraded to the last version firmeware. And I tested this audio card on two different Macs with version 6, and the problem persisted!

  Note: I use demo version 6.

  The sound card works perfectly in my MAC system with the latest drivers. But the problem remains FUSION version 6. I tested it on two different virtual machines with different operating systems, tested on two different Imacs and nothing back to work as before.

  After several tests, which detects the sound card works perfectly with his last official update from the manufacturer only with version 5.0.3 (VMWARE). With version 6, the problem persists.

  I am desperate because I work with music production and use software for windows in my MAC...

  Sorry writing errors. I live in the Brazil!

  Version 6, it must improve the compatibility issue. Problems I am facing a lot after this update.

  Best,

  Marcelo rates

  Before uninstalling VMware Fusion 6.0 you must change the updated hardware Version from 10 to 9 for any Virtual Machine level.  Take a look on: Change the compatibility of a Virtual Machine

  Then uninstall VMware Fusion 6 and then install VMware Fusion 5.

• I need is no longer dial-up moden in my computer. Can I remove it and replace it with a sound card?

  Windows Vista SP2 64-bit

  HP Pavilion a6622f Desk Top PC
  Serial number: [personal information]
  Product number: FK567AA

  If you have a sound card that fits into the PCI slot, it looks like this modem is in, then Yes, you should be able to remove and add the sound card. Please keep in mind that the motherboard has a built-in audio chip. He works? If so, you may need to check if your model BIOS has an option to disable audio integrated.

• s/n measurement mit Soundkarte / dBA measure with a sound card

  Hallo zusammen,

  ICH möchte über die Soundkarte ein Signal einlesen, eine FFT machen und das dann aus - A Signal!

  However weiss ich nicht, wie ich das since Spektrum uber den HEPA laufen lassen kann, so dass ich einen dBA-Wert als result out.

  VI-example-ein habe ich beigefugt...

  Hope mir kann yesterday someone help!

  Vielen Dank

  Alesis

  --------------------------------------------------------------------------------------------

  Hi all

  I want to read a signal on the sound card, an FFT and then do a weight!

  However, I don't know how I can set the full spectrum to get a dBA as a result value.

  I've attached an example of VI...

  I hope someone can help me!

  A big thanks (and sorry for my English :-))

  Alesis

  To LabVIEW. 8.6

  
  

• With the help of directpath with a sound card

  Hey

  I run a test to get a sound card to work within an esxi installation.

  It's the hardware running im:

  VMware esxi 5.0 U1

  Server 2008 R2 X 64

  card board - reaktek ALC269 HD Audio (VEN_10EC & DEV_0269)

  I redirected the sound card in the machine and I installed the driver.

  the problem is that I still get not all devices.

  

  Any help will be very appreciated!

  Best regards

  Andreas

  Your screen is from a RDP session or a console session?

• Audio lost after upgrade to Vista on a Satellite Pro A120 PSAC1E

  Hello

  I just upgraded to vista and I lost my audio. I tried all the latest orders, still no luck. The pc says the driver is installed and the device works correctly, but I can't hear anything. Volume is 100% also.

  Any ideas?

  Well, first of all how someone should provide advice, if you n t write anything on the name cell phone you! ???
  Then please provide more details on your laptop!

  I noticed the same problem on the satellite U200. After upgrading from XP to Vista there is no sound, but the audio driver has been correctly installed and audio chipset has also been recognized correctly.

  After a long investigation, I found a solution here in the forum.
  First, it was important to increase the volume to the maximum with XP installed. Together sound controls must also be set to max.
  Be sure to use the RIGHT driver sound after the new installation of Vista.
  Not all drivers are working!

• Data lost after upgrade to Windows 10

  From Windows 7 to Windows 8, the address book and all the information has been lost. He did not return with Windows 10. A professional computer man could not find.  Help, please.

  Hello

   
  Please contact Microsoft Community.
   
  Please confirm this information to help you better:
   
  1. the application or the e-mail client you use. ?

  2. are you able to access the contacts folder by using the web browser. ?

  3. Apart from the missing contacts, it is able to send and receive emails after upgrade to Windows 10?

  Get back to us with the required information, we will be happy to help you.

   

   

  Kind regards

  Anusha

• I have no sound on my vaio after upgrade of windows 8 Pro

  Dear Rohit,

  I did the steps you recommended, and I got the error message... "the device is used by another application.  Please close all units are audio playback on this device, and then try again. "How can I solve this problem?  I cycled power several times without success.  Thank you!

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-have-no-audio-on-my-VAIO-after-Windows-8-upgrade/4076a4b2-5ccf-4e8d-8105-601f65ffacd3

  Hello

  This problem is usually due to any third party/app program. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. What is the number of brand and model of the computer?

  I would try the following and see if it works for you.

  Method 1:

  Try to install the latest sound card drivers from the Web site of the manufacturer of the computer or from Windows Update and check if it helps.

  Method 2:

  Put the computer to boot and check if the problem persists. This is to verify to what program/APP is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• Sound does not load after upgrading to El captain

  Hello

  After upgrading my iMac (late 2009) to El captain the sound no longer works. Trying to open the preferences-> the error message appear that this could not be loaded. Other sounds associated with apps like audio / midi set up crashes.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.