Equium A 60: the screen went black

Similar Questions

• I was running Mozilla firefox on my computer until two weeks ago. At that time, the screen went black and now I am not able to use it.

  I was running Mozilla firefox on my computer until two weeks ago. At that time, the screen went black and now I am not able to use it.  When I click on the icon and open to the top it says cannot load xp.com and a flag of resolution comes up saying it can't run a resolution less than 1930 x 2300. I have no idea what this means and how I can solve this problem.  I thought that maybe the application was bad, so I deleted and then added it back on and it does the same thing.  I even did a restore of the system to try hard but nothing I did the work.  So, how can I solve this problem.  I'm not a computer genius, so he must be explained in simple easy to understand instructions.

  Hello

  I suggest that you view in Mozilla Firefox community because there seems to be a Firefox problem.

  https://support.Mozilla.org/en-us/

  Some examples of the problem:

  «I can't open Firefox, it says could not load xpcom.» Who is wrong? »

  https://support.Mozilla.org/en-us/questions/965228

  "I get an error"Unable to load XPCOM". I know that I can reinstall Firefox, but how do I save my favorites?

  https://support.Mozilla.org/en-us/questions/1029239

  'Error message cannot open the XPCOM and impossible to open ALL pages '.

  https://support.Mozilla.org/en-us/questions/1006494

  Here is a YouTube video on fixing this error:

  https://www.YouTube.com/watch?v=x_C2eaNj234

  See you soon.

• Change the resolution of the screen and the screen went black

  Then I tried to change the resolution of the screen and the screen went black.  I tried to restart, plug in my HDMI port on my TV... Nothing.  So I went with a system refresh (yes I'm sure it was a refresh and not a restore).

  The fact that there is no integrated procedure to detect the moment where that happens and return to the old resolution is annoying enough...  But now after that choose the system update and it would be only to reset the settings to default back and keep all the files (as he said it would be), I am extremely frustrated to know that it has deleted ALL my programs.  Program E-v-e-r-y.  This means that Chrome, Firefox, jGrasp, AutoCAD, all my programs Microsoft Office, all my Adobe stuff, my Visual Studio and so much more that I'm not naming.

  I REALLY hope there is a place where they were stored so I don't have to reinstall everything manually.  If not, then wow, Microsoft... We finished.

  Unfortunately a refresh as he said, only maintains personal records (program data), the data can be located in the "in the"Windows"folder windows.old folder normally C /: Drive, all modern apps should be kept."

  All programs of office/legacy (Chrome, Firefox, jGrasp, etc.) need to be relocated from their original sources

  Keep all of your programs, personal files (data), settings, the best option is to create a "Disk Image" - see link below for info.

  http://Windows.Microsoft.com/en-AU/Windows7/choosing-an-advanced-recovery-method

• I typed the letter e in the search box on the start menu, press ENTER. The screen went black. Press ESC, nothing, then ctrl + screen esc returned a second then went black, once again, then crash! What have I done?

  I typed the letter e in the search box of the start menu and press ENTER. My screen went black. I hit esc. control, Press esc. set up the start menu, then screen went black again then the computer crashed. What have I done? OS = vista Home premium

  Hey Mike,

  I'm unable to reproduce successfully what experienced you. Does this occur at any time using the computer?
  One thing, you can try to get more information about what happened to check the event viewer.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  For more information on what to look for in the event viewer, you can look at this article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
  Can't wait to hear back on your part.

• display a page when half of the screen went black then now can only read half

  My screen now has only half the viewing area. Some of the icons have moved across the screen too. Half of the page is now dark with just the icons indicating at the bottom. What I can do to get back to a normal full page please.

  [Moved from comments]

  Hi Emily,

  Thanks for posting this question in the Microsoft Community Forums.

  I see that the computer screen only appears on half of the screen and the other half is black.

   

  Let us work together to solve this problem.

  However, we need more information on this issue. Please answer the following questions.

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. when exactly this question produce?

  4. don't you make changes to the computer before this problem?

  Please answer the questions so that we can better understand the issue.

• BlackBerry Z30 don't switch call to the speaker using the navigation. Screen went black accept after phone call.

  I have this problem no need of me.

  While driving and use any software of navigation, such as:

  1. built in maps

  2 Waze

  3 NavFree

  If someone calls me, I can take the call. But immediately, the screen went black.

  I can't switch the call to the speakerphone. After random seconds, to switch screen might look for a second glance, and then the entire screen turned black.

  Although it is black screen, I can't do anything, including trying to drag up to close current app/call.

  Maybe it's something to do with the Navigation periodly software disables screen timeout?

  Hello, Yes,.

  Is this the same problem as described here:

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z30/Z30-keeping-the-dial-pad-quot-lit-quot-when-in...

  Discussion on how the screen turns black during a regular call, it is impossible, for example, to listen to a call and to have the keypad remains lit, so you can press the right numbers while dealing with an automated reception, was doing phone banking, or using any other system that relies on automated messages.

  The problem came down to how some people take their phone (especially when trying to listen to the guests and press the right button at the same time).  The solution has been to hold the phone differently.  So my question would be whether the phone is blacking out because of the very special combination of things happening in your scenario, or is it blacking out because you're online and proximity sensor of the phone thinks you're holding it to your ear (and think that when you do this, you want to have blackened keypad).

• Screen went black.

  My screen became suddenly black on a website. I turned the iPad back and got a screen that said I had to turn my iPad followed a request to enter my Apple ID and password. I don't know why the screen went black suddenly, or if it's Apple who request my username and password. Why should I activate my iPad again. This is for real or a scam? I don't want to do as requested without assurance that it is authentic. Help!

  Hmm...

  Apple wouldn't ever to someones iPad so do not put in the apple id info.

  I recommend that force you shut off of your iPad. (Hold down the home and power buttons)

• HP Pavilion all-in-one desktop computer: computer turns on the screen then black

  Hi I turned on my computer about a week ago, that the hp logo appeared on the screen and then the screen went black just for 10 sec, that this is an error with numbers does not remember is their exact number given that on that day there, he made the same thing hp logo then black screen only the error did not appear again please help :-/

  I finally fixed it yay thanks to the very helpful advice here so relieved now :-D

• Portege R100: The screen goes black after installing SP2

  Hello
  Currently, I tried to install SP2 for my laptop (Windows XP pro) R100. The end of the installation procedure I restarted the system, as requested. The windows logo appeared, then the screen went black and the only thing I could see was the mouse cursor.

  After several reboots, the situation did not do better. I tried to go on safe mode, but I had the same (only this time the black backround was typical registration of safe mode on the sides). I will perform a system restore without having to install SP2, but the fact that I am on a DSL connection most of the time very important SP2 installation.

  I would appreciate any solution to this problem.
  Thanks for your time.

  Hello

  As far as I know sometimes a few utilities and drivers must be updated after installation of the service pack 2 Microsoft.
  On the Toshiba driver page I found a backgrounder update of Microsoft Windows XP SP2 that contains a few s information about the utilities that must be updated.

  However, additional I found a lot of new drivers for R100.
  I think you should also try to update the old drivers as driver utility and the graphics card chipset.
  Eventually, it helps.

• After you enable SLI on the Satellite x 200 mode the screen goes black

  Hi all

  my name is Alessio and I encounter the following problem with my Satellite x 200-24e with Vista home 32-bit:

  Recently, I updated the operating system and yesterday I updated the VGA driver with the latest version available on the web site of Toshiba (display-20080904102618), everything worked fine but when I activated mode SLI the screen went black.

  I restarted the laptop and I tried to boot Vista on a regular basis, but I still got black screen.
  Then I started Vista in safe mode and reload the VGA drivers to set the SLI mode since the safe mode did not identify the model VGA.
  Can anyone help me solve this problem and get the SLI mode working again (I was able to set the SLI mode before update the VGA driver)?

  Thank you

  This wonderful s information.
  It of strange that the screen was dark after the SLI has been activated but it looks like it's working now.

  Thanks for your comments

• Satellite P100-473 - suddenly the screen turns black

  Hello

  Since a few days, I have a problem with my Satellite P100-473 (with Vista Home installed recently + teamspeak only) after you have installed the latest version of Nero (maybe a detail)
  and do not know how, all of a sudden the screen went black.
  I so reboot and still black but the laptop properly started, the screen is activated (light up/down).
  I'm trying not to switch the display on an external monitor (VGA and DVI) no signal.
  I remove the battery for a few minutes.

  After a lot of irritation I gave it a week, I am again yesterday and after two tests display return with an error (such as a debug message), I forgot to note due to the excitement... ten minutes later same problem again:'(.)
  Yesterday before restarting the screen, I wait to start completely > type my password > sound > wait a minute > and type ESC / enter key at random.

  Can you please help me to find the source of this problem and maybe the solution to solve?

  Thank you very much for your future assistance, I hope you understand my pathetic English
  Best regards

  Hello

  Wait. You said you use external LCD and an external LCD related to this laptop.
  Do you use an external monitor Samsung, and maybe have you installed MagicTune software on your laptop?
  Please check this box.

  As far as I know software Samsung MagicTune can permanently disable the integrated computer Toshiba LCD display screen. Why?
  Because the MagicTune software is designed for use with desktop computers that do not have a built-in LCD screen.
  If your integrated LCD display has been disabled by the MagicTune software, you will need to make an arrangement for repair with a Toshiba authorized Service partner.

  But I hope that you have not installed this software.

• Qosmio G10-105: the screen is black

  I was asked to look at a Qosmio G10-105 by a friend who claims that it functioned very well until one day "the screen went black.

  It seems to start fine but there is absolutely no image on the screen with backlight, no and no image "Dim". The problem is that when I plug in an external display there is also no image at all however becomes the external display backlit, but that's all.

  Can I assume that this is neither the inverter, backlight screen or I get no image on an external display?

  Is it likely to be the graphics card? If so, is it replaceable or it is part of the motherboard?

  I tried 2 external displays

  Any help / ideas would be appreciated...

  Thank you
  Rob

  > Is it likely to be the graphics card? If so, is it replaceable or it is part of the motherboard?
  Hmm. It really looks like a graphics card problem
  It was a good idea to connect the external monitor to check if the same problem would appear on the second screen that there is a simpler way to find out if this problem could be linked to the TFT screen or the graphics card.

  The GPU chip set on the motherboard and in most cases (in your case too) the whole motherboard must be replaced :(

  Unfortunately, but it looks like an expensive affair :(

• My HP Pavilion laptop g6 hangs on the screen then the screen goes black!

  Hi, I have a laptop Hp pavilion g6 running on windows 7 that I bought for my high school diploma. Of course she had only one year warranty. At first, all was well, then he would start gel and goes black. I restored to factory settings, and everything was fine until Tuesday morning. Tuesday morning I woke up and I went to turn on my laptop after hibernating all night, as I usually do. Only instead of commissioning, he went to the logon screen and after clicking on enter my password it froze. He stayed there for a good 2 hours and then the screen went black and the small arrow white that presented themselves. After that, nothing so I turn it off and back on it. It does the same thing. Last night, after trying for several hours, I restored to factory again. This morning it worked for a few hours, then the office frozen and then the screen went black and is insensitive. Currently, it is still insensitive.

  Update: it works fine in Safe Mode.

  Hello

  303 error code is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  This also corresponds to the start-up question and would explain why you can run safe mode because the disk is under less load (that is, much less read/write requests).

  I gathered from your original post that the laptop is no longer under warranty - you can check the status of your warranty here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and your notebook series g6 Nr - see here for an explanation.

  Kind regards

  DP - K

• Pavilion HP dv9925nr screen went black

  Hi all... Hope someone can help me.

  I have a laptop hp pavilion dv9925nr the screen went black. I did a double screen and it works fine. After having done my research opinion just the screen is not good. I bought a new screen to replace but need to see a video on how to replace the screen. If anyone can help me I will appreciated. Thanks in advance

  Jevito81 wrote:

  Hi all... Hope someone can help me.

  I have a laptop hp pavilion dv9925nr the screen went black. I did a double screen and it works fine. After having done my research opinion just the screen is not good. I bought a new screen to replace but need to see a video on how to replace the screen. If anyone can help me I will appreciated. Thanks in advance

  Try this:

  https://www.YouTube.com/watch?v=1nywOvz_nAA

  Remember that Google is your friend here when searching...

• Screen went black with 'Input not supported' circulate on the screen.

  I have a Compaq Presario SR2180NX computer with a monitor, HP W19b. Lately the screen fonts/resolution move on their own to a much larger size. I went in the resolution to change it several times. Now, when this, my screen went black and a box with 'ATTENTION' entry not taken in charge"is floating around the screen. I rebooted, it unplugged and restarted but I can't display to show anything else. Suggestion? Comments except buy a new update of thing? Thank you very much.

  Start the pc in safe mode and try to change the resolution.
  Then update the graphics driver.
  C.