Equium A100-147 - bought the bad battery

My Equium A100-147 is about 3 years now and won't hold its charge longer than 10 minutes so I bought a used one on eBay for a broken machine.
The battery itself is quite new in terms of use-life, his laptop computer that failed!

It's the wrong kind.

Been declared as Toshiba equium laptop battery but it is of course many variants.
My battery model number is: PA3399U-2BRS 10.8V 4000mAh

EBay battery model number is: PA3384U-1BRS 14.8V 4300mAh and nealy twice the size! (Could someone tell me models that suit so I can sell it on)

My mistake!

Pete has soon.

Hi Pete

Before you wait here put the part number in Google and you will find on what mobile phone models can use this type of battery.

Tags: Toshiba

Similar Questions

  • Equium A100-147 of the shield 6001 Setup error

    Just had a new mobile phone and cannot download the software for it but it loads ok on my pc of comrades. I can access the reading me files on the drive, but any attempt to uploasd the other offers so all I get is an error-6001 with her code tells me to check the internet connection / delete the folders temp etc all this has been done and still no joy.

    anyone can throw some light on the question please.

    was soon pete!

    Hello

    It might be useful to a few software updates in your system. First check to see if all your drivers and systemtools are up-to-date.
    Then, make sure that all windows updates are installed and that your operating system is updated.

    After this it s always a good idea to clean the registry. You can use tools like CCleaner which is VERY good tool for cleaning the registry.

    And last but not least: If you have tried to install the software of your phone on the manufacturer's cd, it would be preferable to download this software (because of news) and try it with the most current version.

    I tried to make light, I hope it would help you...
    Welcome them

  • Upgrade of RAM Equium A100-147

    Hi, I have an Equium A100-147 with the standard of 1 GB of RAM (512 MB + 512 MB pc-4200) professional XP.

    I'd like to update, and I was wondering if it would be allowed to replace one of the 512 MB sticks with a single stick of 2 GB pc-5300. RAM would be then 2 GB pc-5300 plus 512 MB pc-4200 = 2.5 GB in total.

    Or would it be better to buy 2 x 1 GB sticks of pc-5300 and sell or discard existing memory?

    I see a significant speed increase over the existing configuration of the Ram?

    All advice appreciated.

    Thank you.

    I agree with Akuma, it would be better to use 2 x 1 GB modules.

    This combination with 2 GB and 512 MB with different (PC4200 and PC5300) specifications could make problems like freezing, BSOD, etc..

    At present, the price of memory is very cheap, so I think that this should not be a problem.

  • Equium A100-147: I get an error during the recovery procedure

    Hi again,

    I had trouble with my equium a100-147.
    I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

    I tried the new recovery disk and am now errors when I boot the disk.

    error is

    "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

    any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

    Thank you

    Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
    It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
    Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

    -fixboot
    -fixmbr
    -bootcfg /rebuild
    -chkdsk /r

    If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
    Once this procedure tries to start again on the new recovery CD!

    Good bye

  • Impossible to update the setting of DVD region on Equium A100-147

    Hi I have an Equium A100-147 with a CARPET * a DVD-RAM UJ - 841S and I am returning the dvd region 2 region.
    Tried to go through Win DVD, media player and the Manager of devices but not successful on all occasions.

    Whenever I thought I left a change of reference, but when I say yes I want to make the change, that is not the case.
    I tells me that I must use a region 2 media (do) and the administrator (this is me - I'm the only user).

    I now regret letting my nephew use the laptop for watching a region 1 dvd.
    Am not longer under warranty but have whateverhappens coverage of curries.

    Help, please!

    If you check the properties of ODD under DVD Region changes remaining how is noticed?

  • Question on the disk anti-shock HARD on Equium A100-147

    Don't Equium A100 - 147 HDD have the same shock of the A120 series?

    Hello

    Sorry, but the Equium A120 is unclear to me. Where did you find information on this laptop and HARD shock anti-mecanisme disc?

    I found some info on the new feature called Toshiba EasyGuard.
    Protection of hard drive (HDD) a feature of Toshiba EasyGuard is designed not to damage the hard drive and disks of data caused by the shock, fall or vibration.
    This feature can be found in the device under the section manager system devices as driver of Toshiba HDD protection shock sensor.
    But unfortunately, I don t find anything similar on the Equium A100

  • Equium A100-147 - Native resolution on the external LCD display does not work

    Hello

    My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

    So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

    I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

    Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

    Can someone give me some advice for what can do?
    Thank you!

    Hello

    You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

    If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

    If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

    But first he must find out what external resolutions are supported by the GPU.

  • Equium A100-147 - where to find the ethernet LAN driver

    Hi all

    I have problems to find the dirver for my ethernet controller...
    I went to the toshiba Web site and on the LAN driver is not finished, he does that with any application to uninstall, doesn't have to install, missing problably...
    I could find on the web...

    I managed to install the wirelles, so I can use the net over there... but I want to install the LAN as well...

    Anyone know where I can find driver (ethernet LAN) Equium A100-147? *

    Thank you very much...

    Hello!

    Have you tried to update the BIOS?
    Check the Toshiba site for a newer version of the BIOS:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Equium A100-147-glitch-pop-crack if the sound is muted

    Hello.

    I have an Equium A100-147 with Vista home Premium SP1 and 1 GB of RAM.

    Recently I get a glitch-pop-crack from time to time even if the audio output is cut.
    Have no idea what could be the cause?
    I'm more or less certain that everything is up-to-date.

    Thanks in advance.

    I never heard a question also and now I can t say what's the reason for this. :(

    You have the same problem on external speakers?
    What operating system do you use?

    Perhaps you need to update the audio driver you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good luck

  • Equium A100-147: Impossible to get Bluetooth to work

    I bought an Equium A100-147 last week and noted in the manual it should have Bluetooth capabilities. However, I can't get this to work. I looked for my phone, and it does not pick up the computer as a bluetooth device. In the help files, it says I can set it up in the bluetooth settings in the Control Panel, but there is nothing in there. I tried to install the battery Bluetooth Toshiba, but it keeps asking me to install the bluetooth device.

    This computer actually has bluetooth abilities or not? If so, how can I get this to work?

    See you soon

    Hello

    Each unit with BT has BT label in the lower corner. Something like this http://support.toshiba-tro.de/KB0/FAQ35007I001WR01.htm

    If you do not find it the BT is certainly not available.

  • Equium A100-147 would not start

    Equium A100-147 would not start. Only the lights next to the CapsLock F10 F11 keys are on. When the switch is pushed the lights disappear back only after about 15 seconds.

    Help, please.

    Disconnect the power adapter and remove the battery. After doing this press the power for 30 seconds. Wait a few moments, connect the power adapter only and try to start your laptop.

    What happens when you do this?

  • Equium A100-147 doesn't boot up - no display on screen

    Hello

    I have a Toshiba Equium A100-147. When I turn, I see as the light of the maximum but there is no display on the screen.
    I read on a previous thread on a similar model that this has been fixed by resetting the computer.
    I understand there is a possibility that there is a problem with the motherboard, but I remain optimistic that a manual-reset would work.

    Is someone can you please tell me how this can be done?

    You can try this procedure simple and short;

    -Remove the battery from the laptop
    -disconnect 3rd external devices and adapter
    -leave the laptop for about 20-30 min
    -then reconnect battery and AC adapter

    If the portable fuel after this procedure, then your have a serious hardware problem and only the ASP can help you.

    I don t want to make a statement on the possible faults, because it of always hard to say what's wrong exactly, but it looks a bit like a motherboard problem.

    Good bye

  • Equium A100-147: large screen display resolution is not available?

    Hi, I recently bought a laptop A100-147 - accepted a view model that I had trouble getting one of them. On the beautiful screen, the screen resolution is 1024 x 768 - that it and 640 x 480 and 800 x 600 are available. This sounds awfully stretched.

    Is this correct? Or do I have to create a different graphics driver that allows me to select a screen resolution?

    Thank you.

    Hello

    According to the description of the Equium A100-147 comes with color Wide XGA TFT 15.4 TruBrite display ". The standard resolution of this monitor is 1280 x 800. If you dot have this one please install graphic driver. You can find it on the download page of Toshiba under http://eu.computers.toshiba-europe.com support & downloads.

    I can't imagine that it happens after the first start. You have preinstalled your own operating system?

  • Equium A100-147: cannot install Vista because of startup configuration problem

    Equium A100-147 (Windows MCE) bought compatible Vista and bought my promised copy of Vista... used Toshiba step by step DVD ROM upgrade and also updated the Bios.

    Tried to load Vista Home Premium and after going through all the steps, it came with this message...
    «Could not update the computer startup configuration - installation cannot go ahead «...»»

    How should I proceed and what is useful to load Vista.
    Thanks in advance for any help.
    Considers that Howard.

    Hello

    How have you tried to install vista on the laptop?
    Have you tried to switch the MCE to Vista or were you running the new clean install of Vista?

    In my opinion, you must perform a clean installation. Don t updated the existing MCE of Vista.
    In such cases, you can join different installation problems

    If you are an owner of an original MS windows XP CD try to run the console of your windows XP CD recovery.
    Demarrer start from the CD at startup, and then press R to access the recovery console after loading the driver.

    In the recovery console, typefixbootand then restart your laptop.
    Then insert your Vista installation and restart.

    This should solve your problem.

  • Equium A100-147 - deleted CD/DVD drive

    I uninstalled the readers of DVD/CD ROM of my Equium A100-147 model PSAABE by mistake. How I can I restore it? I'm not very technical

    Hello

    It means that your CD/DVD drive is not more?
    Have you already checked the Device Manager if the drive is visible or not?

    Otherwise, you must follow the instructions in this Microsoft KB article:
    http://support.Microsoft.com/kb/314060

Maybe you are looking for

  • False positive on facebook docx

    When you download a facebook word document, legitimate because I downloaded it before, it gets reported that it might contain a virus or spyware. Because I know what I'm doing, how I disable or circumvent it? If it's a safety device since ff 36.0, co

  • Error message scanner failure HP Officejet 4620

    the 4620 analyse not or copy, I get a scanner does not error message. I don't see the scanning light is lit or see it move

  • My sound from speakers and shit

    (I have the IdeaPad y510p, btw). Then I updated level to Windows 10 Home and noticed that my JBL speakers now sound like shit. I reinstalled the sound drivers, nothing works. I noticed, however, that things sound beautiful when you use headphones...

  • The menu icons and desktop start missing after the start of the desktop computer

    Original title: I do not see my bar of tasks or deskop When I start windows xp, I don't see the start menu or the desktop icons, only the desktop wallpaper. I was able to access the internet Explorer via windows Task Manager... Help me please! :))

  • Media Player does not read CD properly

    For example: the CD track can be named 05 best song, but when he is selected to play, the player will play 09 second best song and so on for the entire CD.  This only happens on one CD among many others which might suggest that the CD is broken.  How