Equium A100-147: can I use an external mouse wired or wireless

Similar Questions

• Equium A100-147: can I use external monitor with 1920 x 1200 output

  Hello

  I have an equium A100-147, anyone know if its possible to use my external lcd as office extended to its native resolution of 1920 x 1200, I want to use it for photo editing.

  None of these options to external display currently on the graphics card drivers provide a decent game with the external monitor.

  How can I make it fit on the screen without stretch or compress images with a decent resolution?

  Hi Mae

  As you probably know the resolution you want to use depends on the installed graphics driver.
  If the graph does not contain the 1920 x 1200 resolution you will not be able to use it.

  But maybe after a small modification of the graphics driver you will be able to choose such an external resolution.

  Please visit this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

  Maybe the procedure described by Jogi might help.

• Equium A100-147 - Native resolution on the external LCD display does not work

  Hello

  My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

  So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

  I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

  Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

  Can someone give me some advice for what can do?
  Thank you!

  Hello

  You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

  If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

  If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

  But first he must find out what external resolutions are supported by the GPU.

• Equium A100-147: can not play games becauce slow DVD player

  Hello

  I have a laptop Equium A100-147. I tried many games on my laptop which should conform to the specifications required for example battlefield 2, however, these games does not work and I didn't know why. I then realized that all the games I tried were all on 4 DVD-ROM drive demanding x, and the specifications I provided with my laptop did not specify what kind of DVD player, I had another super multi layer or something.

  It is while I tried the games that were demanding CD-ROM which all worked fine, I then tried a game that was 2 x DVD ROM demanding that worked apart from a small problem with models of characters not displayed, so I took back defective. Then I tried a 1 x DVD-ROM game that worked perfectly.

  Today, I decided to get my DVD specifications, where I found that my laptop should read 8 x DVD - ROM drives.
  So my question is, is my defective DVD player for not playing more than 1 x DVD - ROM games? And can I contact Toshiba or my provider for repair or replacement or my problem would be something else?

  Thank you, Josh

  Hello

  As far as I know the laptop was delivered with the drive UJ - 841S and the drive supports 8 x DVD-ROM.
  Of course, there must be something wrong if the drive cannot read DVD-ROM media at full speed. The middle is not supported or the drive malfunctions

  What you can do is search for the update of the firmware. Many laptops come with the same drive. See the categories of driver and, possibly, there is a new update of the firmware.

  You can also try to remove the physical drive from the laptop and reboot the device without the drive. Then turn off the appliance, install the drive again and the boot upward.
  The laptop must initialize the firmware again and maybe this will help

  But it seems you notebook is not very old and the warranty is valid. If you need to contact the ASP in your country for more details and possibly for disc replacement

• Equium A100-147: can I connect my laptop to my desktop hard drive?

  My computer laptop satellite has a permanent error when I turn it on: "autochk program not found - skipping autocheck.

  I've tried everything I can think (and advice of you internet) to get the data on my laptop hard drive, including the creation of a boot disk (using an external floppy drive) and a knoppix disk and nothing worked.

  Now, I suppose that if I can connect the hard drive laptop on my desk, I can get the data in this way? But how can I do?

  I bought an IDE 3.5 "to 2.5" adapter disk hard drive, but the instructions indicate that laptop hard drive must have a male connector 44? The hard drive is a Toshiba MK6034GSX and when I removed it I couldn't see 44 pine?

  Any help would be greatly appreciated.

  Thank you

  Yes you can do it, but you need USB 2.0 2.5 hard drive enclosure Kit ".
  Make sure that you buy a box with the right interface. Your HARD drive is SATA HDD.

  If you can connect the laptop HDD s to every desktop or laptop as external HARD drive and you will have access to all stored data.

• Equium A100-147: can not play videos from the site with WMP

  When I try to play videos from a Web site, I get an error message. "Windows Media Player received. Error message Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »
  ERROR CODE DOOD11D2

  My computer settings are set out at the time of purchase. Is this normal?

  Hello

  I think the error messages says that everything you need to know:
  You can not read the file because:

  -Is the file may be in use
  -you won't have access to the computer where the file is stored
  -your proxy settings are may not be not correct

  The proxy settings must be defined on use web browser proxy settings, you can find the setting when you open the WMP and tab marks the Protocol HTTP and meadows configure network.

• Equium A100-147: record now and Roxio can't find Recorder

  Equium A100-147 with Sonic, 'Save now' 7 worm, using gives 'NO recorder' and can not find the drive. If no records. I checked the box 'Save' in the properties for the drive but no joy. Also I tried Roxio software but it was also unable to find the drive.

  All of the suggestions.
  See you soon.

  Please check in Device Manager if the cd/dvd drive is correctly recognized.
  Additional if you can find the drive in the Device Manager, you could try to remove it and restart the laptop.
  After restarting the laptop should recognize the device again.
  Then you should check the functionality of the drive.

  I studied a bit on the site of Microsoft for similar problems and found a few interesting sites:
  http://support.Microsoft.com/kb/320553
  http://support.Microsoft.com/kb/314060/

  In my opinion, some registry entries are corrupted.

• Equium A100-147-glitch-pop-crack if the sound is muted

  Hello.

  I have an Equium A100-147 with Vista home Premium SP1 and 1 GB of RAM.

  Recently I get a glitch-pop-crack from time to time even if the audio output is cut.
  Have no idea what could be the cause?
  I'm more or less certain that everything is up-to-date.

  Thanks in advance.

  I never heard a question also and now I can t say what's the reason for this. :(

  You have the same problem on external speakers?
  What operating system do you use?

  Perhaps you need to update the audio driver you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck

• Equium A100-147 doesn't boot up - no display on screen

  Hello

  I have a Toshiba Equium A100-147. When I turn, I see as the light of the maximum but there is no display on the screen.
  I read on a previous thread on a similar model that this has been fixed by resetting the computer.
  I understand there is a possibility that there is a problem with the motherboard, but I remain optimistic that a manual-reset would work.

  Is someone can you please tell me how this can be done?

  You can try this procedure simple and short;

  -Remove the battery from the laptop
  -disconnect 3rd external devices and adapter
  -leave the laptop for about 20-30 min
  -then reconnect battery and AC adapter

  If the portable fuel after this procedure, then your have a serious hardware problem and only the ASP can help you.

  I don t want to make a statement on the possible faults, because it of always hard to say what's wrong exactly, but it looks a bit like a motherboard problem.

  Good bye

• USB 2.0 Bluetooth DEVICE NOT RECOGNIZED - Equium A100-147

  Hi all!!!

  I have posted b4 about my problems of BT, but still no further forward.

  I have a 2.0 usb toggle universl BT, my last worked well until it broke.

  Since I had xp pro installed, but my USB does not recognize my rocking do not even have a pop up? any ideas.

  When I plug it 3 fast Dong

  Unplug and made 2 Dong

  I tried to install the drivers usb, but nothing.

  do my head now... Please someone help me resolve this issue!

  As far I know Equium A100-147 doesn t support the internal BT module and so if it was not equipped with the BT Toshiba stack.

  If you use an external 3rd party module BT, then you should check if there are drivers designed specially for this external BT dongle.

  Also, check if the BT dongle would be recognized in the Device Manager.
  If there is no dongle BT listed in the list of devices, then remove all controllers and hubs of UBS in the list and restart the device.
  After rebooting again Win XP should initialize the USB ports again and then you try to plug the dongle BT again.

  Good luck

• Equium A100-147 - where to find the ethernet LAN driver

  Hi all

  I have problems to find the dirver for my ethernet controller...
  I went to the toshiba Web site and on the LAN driver is not finished, he does that with any application to uninstall, doesn't have to install, missing problably...
  I could find on the web...

  I managed to install the wirelles, so I can use the net over there... but I want to install the LAN as well...

  Anyone know where I can find driver (ethernet LAN) Equium A100-147? *

  Thank you very much...

  Hello!

  Have you tried to update the BIOS?
  Check the Toshiba site for a newer version of the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Equium A100-147 - including modules of RAM to upgrade?

  Hello

  I think to upgrade the RAM on my Equium A100-147 and I was wondering what kind of RAM I should get and what is the maximum amount of RAM supported?

  It has a processor clocked at 1.6 GHz centrino duo t2050 if that's any help? I looked on the toshiba site and they sell only 1 GB of supported modules, but in other places I've seen people say that it can take more?

  Thank you

  Hi mate,

  The maximum RAM capacity depends on your chipset you have. From Toshiba Web site displays a maximum capacity of 4 GB of RAM, but don t forget, you need an OS to use the full capacity of 64-bit. Otherwise, you are only able to use about 3 GB.

  You can buy all the modules you want to, but I made good experiences with the Kingston modules. Kingston memory research shows the compatible modules for your laptop:
  [Search results for: Toshiba Equium A100-147: http://www.ec.kingston.com/ecom/configurator_new/modelsinfo.asp?SysID=35677&mfr=Toshiba&model=Equiu m + A100 & search_type = & root = uk & LinkBack = http % 3A % 2F % www.kingston.com%2Fukroot&Sys=35677-Toshiba-Equium+A100-147&distributor=0&submit1=Search 2F]

• Possible replacement of Equium A100 - 147 HDD 250 GB?

  Hello

  I own an Equium A100-147 with 60 GB HARD drive. I have a recovery disc and have restored the laptop several times.

  I am considering an upgrade to 250 GB HARD drive.

  Couple of questions...

  The motherboard will host a 250 GB drive?

  If I replace the HARD drive recover CD will install a new copy of the fatory software you (inc windows xp MCE)?

  Any advice would be welcome.

  Yes, you can use a 250 GB. The laptop has a SATA interface and there is no limit as to IDE.

  If you use the recovery CD, you will get to factory settings. This means an XP installation with all the drivers and tools.

• Equium A100-147: cannot install Vista because of startup configuration problem

  Equium A100-147 (Windows MCE) bought compatible Vista and bought my promised copy of Vista... used Toshiba step by step DVD ROM upgrade and also updated the Bios.

  Tried to load Vista Home Premium and after going through all the steps, it came with this message...
  «Could not update the computer startup configuration - installation cannot go ahead «...»»

  How should I proceed and what is useful to load Vista.
  Thanks in advance for any help.
  Considers that Howard.

  Hello

  How have you tried to install vista on the laptop?
  Have you tried to switch the MCE to Vista or were you running the new clean install of Vista?

  In my opinion, you must perform a clean installation. Don t updated the existing MCE of Vista.
  In such cases, you can join different installation problems

  If you are an owner of an original MS windows XP CD try to run the console of your windows XP CD recovery.
  Demarrer start from the CD at startup, and then press R to access the recovery console after loading the driver.

  In the recovery console, typefixbootand then restart your laptop.
  Then insert your Vista installation and restart.

  This should solve your problem.

• Equium A100-147 - bought the bad battery

  My Equium A100-147 is about 3 years now and won't hold its charge longer than 10 minutes so I bought a used one on eBay for a broken machine.
  The battery itself is quite new in terms of use-life, his laptop computer that failed!

  It's the wrong kind.

  Been declared as Toshiba equium laptop battery but it is of course many variants.
  My battery model number is: PA3399U-2BRS 10.8V 4000mAh

  EBay battery model number is: PA3384U-1BRS 14.8V 4300mAh and nealy twice the size! (Could someone tell me models that suit so I can sell it on)

  My mistake!

  Pete has soon.

  Hi Pete

  Before you wait here put the part number in Google and you will find on what mobile phone models can use this type of battery.