Equium A100-147 - Native resolution on the external LCD display does not work

Hello

My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

Can someone give me some advice for what can do?
Thank you!

Hello

You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

But first he must find out what external resolutions are supported by the GPU.

Tags: Toshiba

Similar Questions

  • The Satellite A200 display does not work

    Hello
    I own a Satellite A200, since yesterday my screen did not work. I hear vista start in the background but theres nothing on the screen when the system is off.

    Please help me...

    Hello

    Go you through the devices different views?
    Using the FN + F5, you can switch to the external monitor or maybe TV you used this key combination accidentally?

    It would be also advisable to connect another external monitor to the laptop to check if anything should be displayed on the monitor

    If you're not going to see anything on the second monitor, then a default display could be possible.

    The A200 is not very old series of laptop I think the warranty to be valid. Therefore, you can contact the ASP in your country for and verification of the laptop.

    Good luck and greetings mate

  • Solution of blackBerry Smartphones for the contact numbers display does not work

    I want to see alongside my contacts phone numbers, but when I try the recommended solution (open the tray-> options-> language-> global name display), it gives me two options: 1) first, last and 2) Last, first.

    Neither of these options will display the numbers as well as names. I tried to turn on and off as well.

    I use a new torch bought new, SIM-free and sealed on Ebay in the United Kingdom. It is clear from the stop icon it is an O2 mobile. My network is CytaMobile Vodadone. Grateful for any help.

    Second question: when I type SMS messages it has only a tiny line to enter a big gap of empty space between the beneficiary and as I type. I'm used to having a bigger screen to type on even on a basic phone. no idea how to change this? Thank you!

    Apart from that, I think that my blood pressure has dropped, now that I don't have to continue running to a PC to check what email I might have missed.

    Hello and welcome to the forums!

    I don't think he has no option in the stock OS to display the numbers next to the names of the contacts.  You might be able to do this with an application of part 3, but there is no way to do this with the unit as is.

    It is also impossible to change the entry in the SMS app, I'm afraid.  The line will extend automatically as you type a message, but it starts with just the line.

    Sorry to be the bearer of bad news.

  • Portege Z30 - A - 18 M - cannot set the native resolution on the external display

    Hello

    I tried to connect two different displays full HD to my Portege Z30 - A - 18 M and I was unable to set the native resolution - maximum resolution I can put for those is 1680 x 1050... I was not so surprised by the first that I had a few problems with a native resolution when I connect to the laptop computer Satellite I had before. But then the same thing happened when I tried the other view.

    I thought that this notebook can handle a higher resolution external... Is there a way to force the native resolution of the external display in Windows 7?
    Thank you!

    Just a question: have you plugged your Portege with HDMI cable and use only the HDMI option?
    With other words went from the desktop to the external display only computer?

    I don't have this machine, but I think you should be able to see the desktop on an external device to the HD full 1920 x 1080 resolution.

  • I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

    I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

    I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.

    After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]

    A few external links to help you set permissions:

    MAC

    OS X Yosemite: set permissions for items on your Mac

    WIN

    Set, view, change, or remove permissions on files and folders

    r-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed http://Answers.Microsoft.com/en-US/Windows/Forum/windows_vista-Files/How-do-i-change-folde

    Kind regards

    Ashutosh

  • calendar for the week of jQuery does not work in the new version of firefox v42.0

    Hello
    Thanks for your reply.
    IAM develop on the issue that iam facing knowledge, events on the calendar for the week of jquery does not work in firefox version iam 42.0 faced to the problem that iam unable to change back or delete nominations that are displayed.
    For example if try clicking on one of the appointment generally a popup comes to change or to restore or remove the appointment but iam not getting that. But this feature does not work in lower versions of firefox (version 32.0 for example). Please check the jquery week calendar demo following URL looks like this:
    http://robmonie.github.IO/jQuery-week-calendar/full_demo/weekcalendar_full_demo.html

    I've just rescheduled lunch 12:00-12:15, so it seems to work on 42 Firefox on Windows.

    What is the latest version, where it has worked for you?

    Have you tested Mode Firefox safe to rule out the possibility of an extension conflict? See: Firefox in Safe Mode troubleshooting questions.

  • Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

    I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

    Could you please include screenshots of the so-called issue?

  • the software sticky password does not work.

    the Sticky Password plugin does not work in Firefox 37.

    Changed the product forum this thread is in Thunderbird in Firefox so no need to create a duplicate thread.

    It is an Extension in Firefox and not a Plugin like Flash or Java.

    You're too test is based on the Beta channel (currently at 37.0b3), and the Extensions like these tends to do not support the current version at most which is Firefox 36. www.mozilla.org/Firefox/All/

    In the Sticky Password software you can go in "parameters - supported browsers and install the extension" because I think that may be the case there are updates? https://support.Mozilla.org/en-us/questions/948577

  • Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.

    Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.
    Office Windows 7 2009 service pack 1 Firefox 26 Internet Explorer 10
    Flash player version 11.9.900.170 plugin 11.9.900.170 activex version used by Firefox

    Problem began late November when Miniclip.com forced updated flash player to version above
    -C' was when they started to play a video advertising in the game box before you could start.

    Have screen shots of IE10 and Firefox26 side-by-side clearly showing the problem - how these can be downloaded for see you? E-mail? Web site? This place seems to be text only?

    In the meanwhile the grandchildren and self have learned to use IE10 instead of Firefox that we prefer.
    Their House of Windows XP has same Flash Player in Firefox and it works fine.

    Downloaded two screenshots on Media Gallery.

    You can not attach a screenshot in the first row who starts a thread, but you can do it in subsequent responses.

    Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    See also:

    Reset the zoom of page on pages that are causing problems.

    • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • The date and time does not work.

    I have an iphone 5 c.

    The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

    Even after trying to change it manually, time slows down or stops.

    Everyone has problems with their date and time?

    • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
    • Restore factory settings (no backup)
    • Make an appointment at your local Apple store to have it checked.
  • The new tab key does not work.

    The new tab key does not work when I click it. I reinstalled FF but with no luck - any suggestions would be appreciated.

    What can a problem with the Ask.com toolbar (Tools > Modules > Extensions)

    See:

  • Ejection of the Replicator Express - II does not work

    The duplicator button eject does not work. I have laptop series TECRA M. downloaded the driver for duplicator of toshiba website support and reinstalled but of no use. I searched in all the forums, but did not find any thread for this problem.

    If anyone has any idea on this issue, please help. The button eject everything does and do not see an option in Windows 7 to eject the PC I did with IBM lenovo laptop with a docking station.

    Is - this top hat of Toshiba laptop what do you use?
    I want to say I put t knowledge how it works on other laptops but why you think it should work in the same way on laptop, you used before?

    You can remove your Tecra of docking station using gear hand placed on the upper side right?
    What happens after doing this?

    By the way: If you check the specs of this under system requirements port replicator s Win7 are not.

  • I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

    I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

    Cache and history of the site Clear settings - Safari -.

    (1232)

  • Why the Polish support page does not work?

    Why the Polish support page does not work?

    http://PL.consumer.Toshiba.EU/PL/support/home/support_home?

    I think the error message is pretty clear:

    + Service temporarily unavailable +.
    + The server is temporarily unable to process your request due to downtime or maintenance capacity problems. Please try again later. +

  • How can I get the airplay icon to appear? Changing the settings of firewall does not work

    How can I get the airplay icon to appear? Changing the settings of firewall does not work

    Hello Drjoe378,

    I understand that you do not see the AirPlay icon in iTunes on your Mac. If you have verified that your firewall is disabled or that the problem occurs regardless of the status of your firewall, there is a little more that can help return your ability to connect to AirPlay devices.

    1. Make sure you have the latest version of iTunes and Apple TV software.
    2. Connect your computer and other devices on the same network Wi - Fi. If you are using Ethernet, connect the two devices on the same router or hub. If you use the Wi - Fi and Ethernet, plug your device AirPlay the same router that your computer uses for Wi - Fi.
    3. Restart your computer, device AirPlay and network router.
    4. Because some Airplay devices include a power switch for AirPlay option, look for the option in the settings and make sure that the feature is enabled. Refer to the user guide of the device for more information.

    Use AirPlay to stream content from iTunes on your computer wireless
    https://support.Apple.com/en-us/HT202809

    All my best.

Maybe you are looking for

  • Application does not work.

    After the update of an application, that it does not, there is no way to open it. I can't uninstall even that. I tried to restart and respair phone and still the same thing occur. The icon is under the mist and calls "pending" as it has been updated

  • Satellite C55 - A - dvd/cd player not working not - register code 19

    I have a Toshiba Satellite C55 - A, but my cd/DVD drive does not work.The DVD is very good as it works on another computer. I tried to follow the advice given in another forum. The only information on the computer is the Device Manager - under CD-ROM

  • Satellite A100 - looking drivers LAN

    Hello Yesterday I formatted my hard drive and reinstalled windows xp on it.Unfortunately the drivers Lan hosted on this Web page in support of the centre containing only the uninstall-exes... or at least my pc says that.Also there is that a single ex

  • my pc brethren, although when its turned on it tends to act like the lcd screen is broken. I need help to solve this please.

    the screen goes black don't like not when it goes into mode 'sleep', but it tends to fizzle out and fade to black

  • Internet icon

    clock, network and power are grey in the set-up of the notification area, so I can't get the icon telling me that I am connected to the internet. I used to have, but he disappeared one day. Anyone know why and how I can get it back?