Equium A100-147 - sound devices do not work correctly

I've owned an Equium A100-147 for only less than a year.

The problem I have is that if I put pressure on the area around the left speaker (where is the VGA port) there is a substantial "cracking" / rattling noise. The right does not exhibit this problem.

The other day with a same case design (model Satellite A), I got another PC Toshiba laptop and it seems to have a slightly stiffer construction quality.

Is it worth getting it checked under warranty while I still have the warranty? Or am I just too picky?

See you soon

Interestingly enough, why you support on the area around the speakers. As far as I know the speakers are placed between the keyboard and display and keyboard there is no pressure to the speakers. Very strange method to test the functionality of the laptop! ;)

In any case, you should contact the service because the speaker should be placed and fixed correctly.

Tags: Toshiba

Similar Questions

  • Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

    Original title:

    I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

    I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

    Hi Matthew,

    The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

    Now, check out these links and return to the State of the question.

    When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

    Here are a few common problems with drivers and the means to solve them.

    See the following link for more information:

    Tips for solving common driver problems

    Also check out the following link and run the fixit available.

    Hardware devices do not work or are not detected in Windows

    The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  • My DVD player does not work and all the information I can find is "this device does not work correctly.

    Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

    I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

    I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
    entries that do not fix the resolution of problems and those who "could" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
    There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
    Parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Equium P300-16 t - Synaptics Pointing Device does not work correctly

    I hope someone can help.

    Just bought this laptop and for some reason, I get an error message come saying the Synaptics Pointing Device does not work properly. The touchpad loses some functions and a warning appears informing me of this. I can still use it, but disappears from the icon in the taskbar with the flashing blue dot - when I go into the control panel it says the driver and he asks if I installed another ps/2 pointing device driver

    Looking forward to any help you can give.

    Suggest that you reinstall simply touch pad drivers. Maybe new version?
    So, just uninstall drivers, restart your computer, reinstall the drivers.

    Drivers are located on the download page of European drivers.

  • Microsoft Teredo Tunneling adapter device"does not work correctly.

    Hi Sir/Madam

    Hello, can you help me find driver problems, sir.i am on hp pavilion g6 Series notebook.i found this message there, Windows reports that the "Microsoft Teredo Tunneling adapter" device is working properly. But I opened the Device Manager and I found the icon and I double click and then try to update the driver software but I found ago encountered a problem... This device does not work... Sir can you help me solve this problem... Thank you for your time

    Hi Binet1,

    Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-2225tu issues of driver for laptop and have on the Teredo Tunneling pseudo-interface. Right click and delete all Teredo Tunneling pseudo-interface. Restart the computer. You could update driver software by right click, browse computer for driver software. Select let me pick from a list of device on my computer-> network adapter drivers > Microsoft > adapter Microsoft Teredo tunneling.  You can enable system restore by following this document.

    I'd be happy to help you if necessary because there are many models of HPNotebook, I need the model number. How can I find my model number or product number?
    Please respond with an operating system that you are running:
    Operating system Windows am I running?

    Please let me know.

    Thank you.

  • HARD drive external "this device does not work correctly"Code 10"

    Original title: it does not recognize the external HARD drive. (Convert HDD mobile external HARD drive)

    I have a Sata Drive en-plus close card I bought, I successfully installed the HARD drive and plugged (supposed to be taken & play), it does not recognize the HARD drive and I tried the computer management and replacement of INF. USB but still does not. Also, has problems. Drive HARD Toshiba satellite came 500 GB Fujitsu HDD.

    The point of this is to clean up the cause of the car, there an OPS on it, but I have not anymore!

    Need help please!

    Hello

    Method 1:

    See the link and check if it helps:

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    http://support.Microsoft.com/kb/943104

    Method 2:

    Check the link and try to run the Microsoft Fix it:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

  • Equium A100 - 338 PSAAQE: shortcut keys not working not not after changing Vista to XP

    I recently bought a PSAAQE Equium A100-338. It came preloaded with Vista home premium. I removed what I need XP pro. I found all the drivers to get everything works except the shortcut keys. I tried all the drivers available, but none works. Are there other drivers available for the access keys work.

    Can anyone provide a url to a site where I can get the driver. Also, why are there no XP driver specific available, it took forever to find all those that I needed. I know a lot of it, specialists and companies that will not use Vista and only allow for XP.

    For these features, you have no drivers but Toshiba has designed tools or utilities, but I fear that these tools are not designed for Windows XP Home edition. Not yet.

    I believe you when you say that to many it professionals want to use Windows XP Home edition, but if everything works well, but these buttons are not so important to the features of the laptop and any computer can do its job.

  • Equium A100 - s video link did not work

    Dear Forum members

    I have an Equium A100 running Vista (home edition).
    In the past I had luckily my PC connected to a TV to help to drive a S-video to watch TV programs, DVD etc.

    But recently my computer had to be reset to the factory settings and since that time that the s video link didn't work - PC wallpaper displays on the TV but nothing else.
    I charge what I hope are the latest appropriate drivers (perhaps the source of the problem) and the display settings appear to be correct.

    Any help with this problem would be greatly appreciated.

    Ron

    >... the PC wallpaper displayed on the TV but nothing else.
    This happens when the option extend the desktop to this monitor is enabled.
    If it please enter display properties/settings and make sure that this option is disabled.

  • sound card does not work correctly after Windows update

    My sound card has been disabled when I install an automatic update for windows. There was an extra audio driver in Device Manager 'bluetooth AV audio' and audio peripheral anoither like this. After installation there is no sound coming out if my sound card was on the list of Device Manager. I followed several steps through windows help and support to solve the problem since seeing him on my laptop for mute also did not work. After you resolve the problem with the use of MICROSOFT FIX IT, it was fixed but this isn't the same quality that I get. Its volume is less eventhough volume: 100. The sound card that was originally installed on my laptop is "Conexant High definition SmartAudio HD2. Is there something more I need to do in order for me to get the same quality of sounds I have before installation?

    Moreover, the light of my keyboard for caps lock shift and scrolling also failed after installation. I reformat my laptop after the incident, so I can get a good in the new system, but it does not solve the problem.

    I also need to update my sound card for my HP laptop? Please help me.

    Thank you!

    Hello

    1. what windows update that you install?

    I would ask you to try using a different set of drivers to verify. For more information, see the articles below.
    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    Conexant support:
    http://www.Conexant.com/support/

    I hope this helps.

  • External sound card does not work correctly

    I have a Nimbus PC music that I used for a few years. I have 2 its external cards: my main unit, which is a Focusrite Scarlett 18i8 and the backup device Steinberg CI2.

    The two devices have been works fine with my PC for a long time, but this weekend my Scarlett has stopped working, and my CI2 works with an intermittent buzzing. The two appear as audio devices and I reinstalled the drivers, checked speakers etc. configurations. I also tried both devices with my laptop and both work just fine then the issue is definitely with my PC.

    This problem started after I changed my setup for all my devices on my desk to put on a free-standing shelf so I changed USB ports and moved my PC and audio devices.

    What is the best way to try to solve this problem?

    Hello

    Thanks for posting your question on the forum of the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    1. What is the model number of your computer?
    2. you made any hardware or software changes on your computer before the show?

    The problem may occur due to corrupted audio drivers or the settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the audio Troubleshooter and check.
    Reference:
    Open the troubleshooting of Audio playback
    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    If this does not help, use method 2.

    Method 2:
    Please use the suggestions contained in this Microsoft support article and check the issue.
    Reference:
    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Equium A80: PS2/USB adapter does not work correctly

    I have a satellite A80. I bought an adapter to allow me to use a graphics tablet on the usb ports. The adapter gives a ps2 keyboard and mouse ps2.

    The adptor is recognized by windows and displayed in the list of hardware. It also shows the mouse connected to it as a gift. But, the problem is there is no movement of the mouse either and the ps2 keyboard does not work either.

    Any ideas?

    Hello

    I have never used these adapters and I can t give you a solution, but I can only speculate on this issue.
    I think you should check the mouse options in Control Panel. Here, you can also configure the settings. It is possible with the USB mouse, but I don't know if this is possible with the USB - PS2 adaptor. However, you can check it out.

    I remember, a friend of mine tried to use the keyboard PS2 on the desktop PC.
    He bought a USB-> adapter PS2 but it didn t work.
    The technician had said that there could be an IRQ problem.

    Well, you can also try to go to Device Manager and select mice and other pointing devices area.
    If he has listed more than peripheral mouse so I recommend disable it and only turned on the PS/2 compatible mouse.
    Try to do the same thing with PS/2 keyboard.

  • No sound from the computer but the sound card does not work correctly

    I have a new computer, but can't get any sound through the screen (not new).   The system tells me that I have a sound card and that it works correctly.   Any ideas?

    Hello

    ·          What version of the operating system is installed on the computer?

    ·          When the issue started?

    However, try the steps in the following article:

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • My instant HDTVPCI ADSI device does not work correctly.

    As I said earlier, my instant ADSI HDTVPCI device is not operational, and Device Manager cannot start or reset for me. Please help me to fix this problem, thanks. William Schotts.

    Hello

    Follow these methods and check if that helps:

    Method 1:

    Try running the fixit from the link give below and check if this can help:

    Hardware devices not detected or does not

    http://support.Microsoft.com/GP/hardware_device_problems

    Method 2:

    If the drivers are not installed automatically install use the software that came with the hard disk and install the drivers and software. Refer to this article:

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  • TEREDO TUNNELING PSEUDO-INTERFACE DEVICE DOES NOT WORK CORRECTLY - ACCORDING TO AVG PC TUNE UP

    My laptop is a HP G7030EA - MS Windows Vista Home Basic 32-bit SP2 Intel Pentium Dual CPU T2330 @ 1.60 GHz, 1.0 GB RAM, Mobile Intel 965 Express Chipset Family, bought new in February 2008.  I have not changed any hardware, software, etc.  I do not use it for games, only for things such as e-mails and visit websites

    Until last month when my desktop computer broke, I used the laptop only occasionally as a backup of the computer.  It never quite worked and seems to be unable to handle several tasks at once, often taking minutes for Google to load.  When I get impatient and click the mouse too much I heard a horrible noise and the screen mouse cursor freeze for a minute or two.

    As the laptop has become my main computer at the moment, I downloaded AVG PC Tune Up to see if it would improve it performance has not helped.  I was surprised to see how much memory the AVG2013 anti virus program uses, but wonder if the speed of connection and freezing problems I experience result (AVG Tune Up conclusions on) the Teredo Tunneling pseudo-interface unit does not properly.

    I follow AVG on screen re boards: looking for a software driver update but none was found, and I got the message "the best driver for your device software is already installed.  Windows has determined that the driver software for your device is up-to-date, Tun Miniport, Microsoft Map.

    This left me confused.  If there is a problem with this device, no solution seems to exist.

    Any help that will allow my laptop to function normally is welcome.

    I understand that you want to know if the teredo adapter can cause performance problems.

    The teredo adapter should not cause performance problems.  It is really just used to allow devices work IPv4 with IPv6 Internet service provider.  If the ISP was using IPv6 and your system did not have the adapter teredo, so it wouldn't work properly with the service provider.  For now, IPv6 is a significant minority that the world continues to work on IPv4 as not all networks, Internet service providers, and businesses are not entirely passed to IPv6.

    This thread on the Microsoft forums goes into a little more detail about the adapter teredo including how to disable it so that you only see it in Device Manager.  Unless you are using IPv6, this shouldn't really be a problem.

    If you start in safe mode, the performance problem persists?  Turn on the computer and press F8 once per second for the Mode option, safe mode with networking.  This will help you to further isolate the performance problem.

    Furthermore, does this happen that the adapter is connected or not?

  • On connection WLAN Equium A100-337 security screen is not displayed correctly

    My use of the computer to automatically connect to a specific WLAN without any problem. However, now, when trying to connect to the same network, security touch screen I am presented with is not of the correct type. Instead of two lines of encryption there is one. When I enter the password, I get a message saying I'm connected to the network but cannot access the Internet. The wireless router works fine.

    I have to reset something on my computer or change a setting?

    Hello

    May I ask what wireless configuration tool do you use?
    Have you tried to update or reconfigure the WiFi profile on the router and the laptop?
    Try this. Disable encryption on the router and try to connect without security settings. If it works, you can set encryption return parameters.
    You can also try reinstalling the WLan driver.

    By the way; did you use the firewall? Active firewall sometimes could is a bad influence on the internet or WLan connectivity.

Maybe you are looking for

  • Question re: G8264 and "DATA".

    Is there a way to G8264 of force using the path of DATA rather than MGT? Instead of adding a 'DATA' at the controls can do this by default?

  • Help - Major problems wireless with an all new S10 - slow

    Hello I just got a new black S10, upgraded the RAM to a Kingston 2 GB module. The start is very good. The headache I have now is that the wireless connection is extremely slow and it takes forever to renew the INVESTIGATION period. I downloaded the d

  • I no longer forms in Firefox.

    I can type is more than any information in an area that is pre-made (when filling a registration form or even type something in the help box) the exception appear to be this box and the Hotmail sign-in. I tried other forums and could not enter the qu

  • White horizontal line on the screen... a knowledge that it's... got me confused?

    Opt - x Alienware aw2310 monitor. I have this line boring on my screen... I have unplugged the cable from the monitor and it is still there so I don't know it's the screen itself. has ran LCD conditioning only tool... no change. the line is a little

  • Windows 7 is not genuine after canceling the process of upgrading Windows 10

    Original title: 10 dirty Tower windows. Without my consent, windows 10 has interrupted a program I watched and installed itself. He left no turn of my laptop. After installation and upgrade one came the message asking to accept or refuse. I clicked o