Equium A100-338 does not start the OS Vista - update Bios?

Similar Questions

• Equium A100 - 338 will not start

  Hello everyone I have an Equium A100-338. I bought it in Ireland a little one there.
  Well although it is just out of warranty and it won't start.
  The blue light comes on and the hard drive light comes on for a second, and nothing happens.

  I tried to disconnect the battery a few times. Would not at all light up the screen.
  I plugged the machine on an external monitor but not luck.

  Suggestions people?

  Post edited by: ADMIN

  A new motherboard is a part of portable more expensive so buying a new motherboard is always a costly affair.
  Maybe you should look for some motherboards of second hand on Ebay

• Equium A100-338 does not recognize 4 GB RAM

  Hello

  I have a laptop Satellite A100-338 which had 32-bit Vista Home Premium on when I first bought several years ago. I upgraded from 2 to 4 GB memory soon after getting the laptop but it would use only 3 GB. Recently, I upgraded the operating system to 64-bit Windows 7 Professional which is workng all very well, except that the system is still only making use of 3 GB of installed RAM.

  It doesn't seem to be much in the way of updates the driver of Windows 7 on the Toshiba site for this model. I tried the OS independent BIOS update available, but this did not complete because it was impossible to load a driver of my AppData folder file.

  Someone at - he had a similar experience or could offer some advice?

  > Recently, I upgraded the operating system to 64-bit Windows 7 Professional which is workng all very well, except that the system is still only making use of 3 GB of installed RAM.

  BIOS recognizes the full 4 GB of RAM?
  Check it! You can access the BIOS by pressing F2 when starting upwards.

  You can also check the RAM available in DirectX. In RUN (or search) type DXDIAG

• Satellite A205-S4607 does not start after windows vista update

  Hello

  I was installing updates in windows vista, but the battery was low and the computer is turned off, then, at the beginning of computer doesn´t, only the hard drive led is light but the screen is black, please can you help me?

  The model is Satellite A205-S4607

  It's not so easy...

  Try to remove the battery and unplug the AC adapter, then wait 30 to 40 minutes, plug in the AC adapter and try again. Maybe the problem is resolved.

  Give me a feedback, what happened.

• Equium A100-147 would not start

  Equium A100-147 would not start. Only the lights next to the CapsLock F10 F11 keys are on. When the switch is pushed the lights disappear back only after about 15 seconds.

  Help, please.

  Disconnect the power adapter and remove the battery. After doing this press the power for 30 seconds. Wait a few moments, connect the power adapter only and try to start your laptop.

  What happens when you do this?

• Satellite A100-232 does not start windows, but is stuck

  Hello

  I am having a serious problem with my old laptop (Toshiba Satellite A100).
  When I turn on the pc, it does not start the Windows but is stuck.
  If I press F2 to open the Bios, it seems not work while the works of F12 (select boot device), but it is impossible to start anything.

  I tried the following:

  1 removed, cleaned and replaced the RAM
  2. HARD drive removed and reconnected.
  3. check the HARD drive if it is damaged, but it is not.
  4A tried to boot from the Windows XP cd and install it but it crashes
  5A tried to boot from the cd with Linux, but it does not work.
  6. has created a Windows 98 flash drive to start, but it does not work.
  7 tried to clear CMOS by removing the battery, but I couldn't because he is stuck on MB.

  I visited a technisian but he couldn't fix it.
  He told me that the BIOS is corrupted or crashed. Maybe I should replace somehow.

  Is this possible?
  How?

  Thank you

  It is for the Satellite A105 (PSAA2U) Bios Update, you can test the file at your own risk.

  A text readme file is located in the folder, follow the instructions.
  Download the Bios file from the link and copy it to a USB key, go into you Bios and this flash file.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2188938&PF=true

• Re: EQuium A100-147, does not boot, \windows\system32\config\system - lack-

  This laptop Equium A100-147started does not connect to the internet normally, but she in safe mode.

  So, after trying the virus scans-nothing.
  Restoration of the system-nothing. I decided to put in the recovery disc and reinstall windows media.
  I changed the boot sequence to install, boot sequence changed to original.

  He has reinstalled but won't get to the Windows screen, a message came \windows\system32\config\system-manquant or damaged.
  I can't see even a way to do a repair with this recovery disk?

  Any help would be appreciated

  Thank you in advance.

  This error means that the registry is damaged.

  The registry consists of the following files:

  c:\windows\system32\config\system
  c:\windows\system32\config\software
  c:\windows\system32\config\sam
  c:\windows\system32\config\security
  c:\windows\system32\config\default

  You can restore these registry files in the restore folder of the system hidden on the C: drive.

  Here are the instructions:
  http://support.Microsoft.com/kb/307545

• Toshiba Satellite L70 - B does not start the BIOS or OS

  Hello

  I changed the same parameters (UEFI priority CSM to start: FIRST USB) in the Bios and saved them, now computer laptop does not start, I can't enter BIOS more... Just see a black screen... I tried to remove the pulp and power, clicked on the power 1 m button, but nothing has changed...

  I can fix this please

  Laptop model: Toshiba L-70-B

  Any help please?

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• I updated windows 10-level, he wiped my photoshop. downloaded 11 elements, it does not start the installation

  Hello

  I need help! I use photoshop a lot. I started at level 10 windows and it wiped my photoshop. I downloaded again, it does not start the installation. I tried redownloadeding and it says it can not extract it because all the parts aren't there. Would love to be happy again with photoshop.

  Hi Mark,

  You can download Photoshop elements by using the following link: Download Photoshop Elements | 14, 13, 12, 11, 10

  Be sure to download the two files available for download.

  Kind regards
  Rahul

• I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

  I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  I also went on the link properties itself, but without success in starting.  How to launch the new version?

  Thank you, toinimj59.  I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)

  Solution 1: Disconnect from the desktop creative cloud app and reconnect

  1. Disconnect from and to, the app Office creative Cloud click here for instructions to return in
  2. Launch of Lightroom.

• When the Active Server is shut down normally, the passive server does not start the service

  Hi friends,

  I have a question for the vCenter heartbeat,

  When the Active Server is shut down normally, the passive server does not start the service.

  Is this normal?

  Thank you.

  He starts the services on the passive server because the correct judgment still leaves the server active as being the "main".

  Stop all services of it properly. And after it comes back online replication starts as before, so that no service must be started on both servers. (in this case that you will have questions)

  Please note that on a server computer, you have 2 possibilities to "stopping down": the BONE and the option of status and control of the server Vcenter Heartbeat

  See you soon!

• CS6 does not start, the trial version will open instead of the real version

  After reinstalling my system of time machine cs6 does not start, the trial opens instead. Serial number is not accepted. What should do?

  Hi MFGTG,

  I checked the serial number and found that there is a problem with the serial number.

  I advise you to please call our 800-443-8158 support or start the conversation by clicking the below link

  http://helpx.Adobe.com/contact.html

  Thank you

  Kapil

• Firefox Pei does not start the Profile Manager. Firefox version: 50.0

  Firefox Pei does not start the Profile Manager. Firefox version: 50.0

  Have you tried; Type of topic: profiles in the address bar.

• Satellite A135-S4437 does not start the Vista operating system more

  Hello

  I have a Satellite A135-S4437 old laptop computer for 2 years. It is not start the Windows Vista operating system. When I press the power button, I can't see the screen "in touch with tomorrow TOSHIBA" and below in the status bar is the option press F2 for SETUP or press F12 for the boot device selection menu.

  I tried pressing both F2 and F12, and none of these options has nothing to do. They give just 'Please Wait... "and it remains right on the screen to touch.

  Thanks in advance for any help!
  PG

  Are you can access BIOS by pressing the ESC key?
  Select this check box.

  But to be honest, it sounds like a BIOS problem, and in the worst case, you will need to ask the technician to mobile to help.

  Welcome them