Equium A100-338: Explorer of Vista does not properly

Similar Questions

• Equium A100-338 - Flash memory card does not

  Whenever I have close World of Warcraft, something appears in the upper left corner (looks like it must be a window but only on bar showing) which reads "Toshiba Flash Card (not answer). What can I do to prevent this?

  Im sure he appears during the game as well as I hear a ringing sound.

  I have an Equium A100-338.

  Thanks for any help!

  Hello

  a solution may be turning off the flash card service if Don t you need your USB.

  You can disable it by following these steps:

  -Go to start-> settings-> Control Panel-> administration-> Services tools

  -Make a right click on 'Smart Card' and left click on "Properties".

  -In the window who pop´s you must stop the service and disable it with the "Disabled" choice to the option "Startup Type".

  After that, your flash drive service is disabled and that you won´t get that annoying more errormessage.
  (I hope so: O)

  Welcome them

• Equium A100-338: CD/DVD player does not read CDs and DVDs

  Hello

  ITS BEEN 2 DAYS SINCE MY CD/DVD DRIVE WILL NOT READ ANYTHING MORE?

  I UNINSTALLED THE DRIVER AND RESTARTED THE LAPTOP, SO HE HAS REINSTALLED THE DRIVER AGAIN, BUT IT STILL DOES NOT WORK.
  IVE ALSO TRIED TO GENTLY CLEAN THE LENS BUT THAT DOESN'T WORK EITHER.

  WHEN I PUT A CD OR DVD IN THE DRIVE IT SEEMS TO READ, RE-READ AND RE-READ UNTIL HE GIVES UP AND A LIGHT ORANGE REMAINS LIT ON THE CD/DVD DRIVE ITSELF?

  PLEASE CAN SOMEONE HELP!

  Hello

  Please put a recovery media delivered on ODD, start your laptop and press the F12 key. Choose the CD/DVD as first boot device and check if the recovery procedure starts correctly.

  Please publish results.

• Explorer Windows (Vista) does not

  I struggled for a few months with Explorer windows (Vista).  It all started after an automatic update that has been made by my computer.  Whenever I try to click on something on my windows downstairs bar it freezes and gives me the error message "Windows Explorer is not responding do not."  (NOT INTERNET EXPLORER)  I also lost my sound completely software.  Then, I restored my computer to a point of origin.  But shortly after that my computer re-out to date, and although my sound has no problem now, I always get the error message "Windows Explorer is not responding" very annoying whenever I try to use my windows taskbar.  The research I did I found many people with the problems I experienced.  But not onecanseem to give the right answer on how to solve this problem. It only happens with Vista. Y at - there anyone who can help?

  Hi coolis,.
   
  There are many steps that we could try to try the basic step, it will take place the computer in a State of clean boot, put the computer in a clean boot state followed the following steps:
   
      Step 1: Perform a clean boot
  

  Log the computer by using an account with administrator rights.

  b. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  c. under the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  d. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK and then click on restart.
   
  Once you reboot check if the problem is solved in the clean boot state.
   
  If the problem occurs not in a State of boot, follow these steps to diagnose the component program or start that is causing the problem.

  Step 2: Enable half of the service

  Follow steps 1a and 1B to start the System Configuration utility.

  Click the Services tab, and then click to select the skin all the Microsoft services checkbox.

  Click to select half of the check boxes in the Service list.

  Click OK and then click on restart.

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services, and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  Perform a clean boot by repeating step 1.

  Click the Startup tab, and then click to select half of the check boxes in the startup item list.

  Click OK and then click on restart.

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be the cause of the problem, repeat step 1 and step 2 without selecting the skin all the box Microsoft services at every step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  You can also check out the link below for the steps above:
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Equium A100-299-CD/DVD-ROM does not work

  My CD/DVD-ROM on my Toshiba Equium A100-299 won't work, do you have any idea why?

  I tried to fix it by changing the IDE secondary channel IDE ATA/ATAPI in PIO Mode only, but it doesn't seem to work...

  I get famous I I/O-warning, whenever I try to open programs and DVDs on it. But it works when I put an audio cd...

  Hello

  If all goes well it s not a malfunction of the equipment.
  We should be optimistic ;)

  Check this box: go to the Device Manager and remove the drive from the device.
  After restarting again, the operating system should recognize and initialize the disk again.

  In addition, you can try to clean the lens gently and carefully, maybe it helps

• Game Explorer Windows 7 does not properly

  My Games Explorer does not work. All of a sudden all of my games that is not supported for Explorer (i.e. Gears of War, Halo 2, etc. are there and seem to work) have disappeared and I can't drag and drop anything at all in there. Is it possible to fix this?

  Hi PhreQuencYViii,

  For now I suggest you to see if it was due to a corrupt user profile. Access the link below to fix a corrupted user profile and see if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Let us know if it worked, or to get help

  Concerning
  Varun j: MICROSOFT SUPPORT

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Explorer: menu Favorites does not properly

  my menu "Favorites" windows Explorer is not working properly. "Organize Favorites...". ' display only to white.

  When you add to your Favorites in a subfolder, the added folder is missing after closing the windows.
  My OS is Windows XP Home Edition.
  Help me pls...
  Thank you...

  Install the hotfix that is described by http://support.microsoft.com/kb/972582 worked for me!

• Vista does not properly, possible video driver problem

  My computer doesn't load windows, I have a quick flash of blue screen with the details, but all I can read is "the video driver failed time-out.  I have not recently installed programs/software.  I can access the screen to enter the password, but most of the time can get in Safe Mode.  I tried to restore my computer to a later date, but that doesn't seem to work.  Before it is a disconnection in itself & go to the same user password screen.  Oh and when you start think about loading windows but screen goes black & I have to disconnect the system shut down because the power button on the Tower works.  Can someone please!  I don't want to consider to get fixed because I just had to replace the hard drive in February, because he was fired.  Thank you

  Dell disks do not normally have a Repair Option.

  They are only reinstall.

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  And try to Dell diagnostic information.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• Spider Solitaire for Vista does not properly - black and white

  Need help, there's a week my Spider Solitaire went wobbly.  I have Vista to the Microsoft home page.  It comes in black and white and sort of close.  Other games play ok.  How can I reinstall the Spider Solitaire to work properly?  Any ideas?

  I had the same problem. I noticed it starts just after that Windows Update installed the new version of the driver 7991 for card NVIDIA GeForce 7150 M / nForce 630M video adapter. I have a HP Pavilion dv6000 running Vista Home Premium SP1. I rode just go back to the 7.15.11.7713 driver version, and it works well again.

• Equium A100-338: wireless NIC endangered - suddenly disconnects

  I have a Toshiba Equium A100-338 running Windows Vista. I bought this in February and everything worked well. But for a few weeks now my wireless guard card disappear from my laptop.

  It works fine for awhile (today, for example) and I can browse the internet, all as usual. But all of a sudden it just disconnects, then tells me that there are no available wireless networks.

  When I checked the Device Manager I see that once this happened that my network wireless adapter simply disappeared - it does not appear in Device Manager at all--almost as if he has uninstalled randomly. Sometimes, restarted the laptop I can reuse my wireless, and sometimes I can't.

  I tried to reinstall the drivers and update them, but it didn't seem to do anything. My network card is an Intel PRO 3945abg.

  Please help me! I've looked everywhere for a solution or others who have had the same problem, but am unable to find anything.

  Thanks in advance!

  Hello

  I also noticed several threads and messages to have reported connectivity problems with wireless Intel PRO 3945abg network card. Unfortunately, I think that it s is not easy to say what the problem is or why it happens to me there could be a problem between the drivers (software) Intel and Microsoft Vista.
  I put t think the material causes of connection interruptions.

  I studied a little more on the Intel page and found this site:
  http://support.Intel.com/support/wireless/WLAN/sb/CS-023579.htm

  You can check it and probably you will find a new driver version or a patch
  Do you use a connection Intel Pro Set WLan utility? No, then I recommend this test tool and use it for the WLan configuration.

  PS: Take a look at this page from Toshiba:
  http://APS.toshiba-tro.de/WLAN/

• Equium A100-338 display has stopped working

  Hello

  I have exactly the same problem on my Equium A100-338 loaded with Vista.
  The display has stopped working (he went to a poorly lit black screen) after I had rebooted my machine even if the computer and the hard drive seems to work Ok with the lights on. I tried the usual elimination of power and the battery and restart it tricks, but after initial success it has stopped working after a few weeks.

  Once I had the computer operation that I only closed it down in the mode 'sleep', and he continued to work for a month until that he should be released after a windows update. I then plugged an external display and use of the Fn + F5 key got the external display running.
  Low and behold, the screen of the laptop started working again as if it had been "energised".

  I took what the laptop screen was OK and that he would not need replacement.
  The laptop worked OK until it needed to restart another when the unrest started again. The screens are gray on the monitor and the laptop now.

  These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  Now, I bought another laptop Toshiba Satellite to connect to the forums trying to find out if my original computer can be repaired
  These problems seem to be quite common on Toshiba computers.

  Any help members would be welcome.

  > These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  For the most part a graphics card driver must be reinstalled or updated to a newer version it can also be a problem of OS which means that the new facility could help
  But try to update the display driver

• Equium A100 - 338 PSAAQE: shortcut keys not working not not after changing Vista to XP

  I recently bought a PSAAQE Equium A100-338. It came preloaded with Vista home premium. I removed what I need XP pro. I found all the drivers to get everything works except the shortcut keys. I tried all the drivers available, but none works. Are there other drivers available for the access keys work.

  Can anyone provide a url to a site where I can get the driver. Also, why are there no XP driver specific available, it took forever to find all those that I needed. I know a lot of it, specialists and companies that will not use Vista and only allow for XP.

  For these features, you have no drivers but Toshiba has designed tools or utilities, but I fear that these tools are not designed for Windows XP Home edition. Not yet.

  I believe you when you say that to many it professionals want to use Windows XP Home edition, but if everything works well, but these buttons are not so important to the features of the laptop and any computer can do its job.

• Equium A100-338: Sound does not work currently running Win XP

  Hello

  I have a Toshiba Equium A100-338, I recently installed windows XP on it but my sound is not working now.

  I downloaded all of the toshiba site realtek drivers still doesent work. Can someone please send tell me what sound card I have and where do I download it from.

  Thank you

  Hello

  The problem is that you need install Microsoft patches before you continue installing the audio driver.

  I found some useful tips and advice in this forum and it seems that you need to install the
  KB888111 and KB835221 hotfix before installing the sound driver.

  Please check this!

• What is the best way to install XP on Vista Equium A100-338

  I want to install XP on my Equium A100-338, who has already installed Vista. What is the best way to do it, I heard a lot of bad luck stories trying to do!
  I do it only as a new software, with that I need to work only works on XP.

  Any help appreciated

  Thank you

  Hello

  In my opinion, you must install the XP operating system on the second partition.
  In this case, you can use the two BONES; Vista and XP.

  Using these two s OS has many advantages. For example, you can always test the Vista and the new Microsoft features that are available in Vista and, in addition, you can use the XP if you need to run some programs and applications that are not fully compatible with Vista.

  Then first ask how o create a second partition in Vista.
  Well, this can be done in disk management. Right-click on the my computer drive management made right click on the disk to manage and modify the size of the partition.
  Then the free space on the HARD drive can be activated, and you can create the new partition.

  Then simply boot from Win XP and install it on the second free partition.
  The Toshiba drivers needed should be downloaded from the Toshiba page.

  Good luck

• Equium A100 - 338 will not start

  Hello everyone I have an Equium A100-338. I bought it in Ireland a little one there.
  Well although it is just out of warranty and it won't start.
  The blue light comes on and the hard drive light comes on for a second, and nothing happens.

  I tried to disconnect the battery a few times. Would not at all light up the screen.
  I plugged the machine on an external monitor but not luck.

  Suggestions people?

  Post edited by: ADMIN

  A new motherboard is a part of portable more expensive so buying a new motherboard is always a costly affair.
  Maybe you should look for some motherboards of second hand on Ebay