Equium A100 does not illuminate

My A100 does not illuminate. Anyone have similar problems?

I had a little trouble with the plug of the AC adapter into jack but have managed to get charged. When I put now the head in the light orange is on, but nothing else and it will not start.

I would be grateful for any help.

Hello!

What problems have you had with the AC/DC adapter?

In this case, you can do many things to get this working again, but you can try to remove the adaptor AC/DC and battery. Wait an hour and reconnect both devices and try it.

If it doesn t work I think you will need help of an ASP. :(
On the Toshiba site, you can search for the closest: http://eu.computers.toshiba-europe.com => Support downloads & => find an authorized service provider

Good bye

Tags: Toshiba

Similar Questions

  • Equium A100 does not recognize the charger

    I was wondering if anyone has had the same problem as me. I plugged my laptop Equium A100 to load and it basically does not recognize that it has, a charger, it worked perfectly fine the other day and my computer still works fine.

    Does anyone know if this could be caused by the shipper or the laptop? If it is just the charger I have to go buy another.
    Any response would be appreciated.
    Thank you

    I don't know about you but there is a problem of contact between AC adapter slot and motherboard. If the power adapter is recognized sporadically, I have no other explanation.

    The best thing you can do is to contact the service. They should check it.
    The warranty is still valid?

  • Satellite Pro A100 does not illuminate

    Hello

    I have problems with my computer toshiba laptop, suddenly the other day, he does, instead when the power button is held three lights... turn the caps lock light and lighting under the f10 and f11 keys, when plugged into current alternative battery light turns orange.

    I tried to remove the moemory models and hard drive, but nothing works, nothing changes.

    any help would be appreciated.

    Thank you, tom

    Hello!

    You have the same problem, if it is start with battery or AC/DC adapter?

    In the worst cases, you need help from the ASP. The technician must check your laptop to make sure that the part or parts are defective.
    On the Toshiba site, you can search an ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • Satellite A100 does not illuminate

    When I press the power button the orange battery light flashes but nothing happens.
    It worked fine until he slid my knees yesterday. He has not hit the ground because I caught, but now it will not work.
    I wonder if the battery or the charger may be damaged?

    Hello

    What happens if you connect to the laptop adapter?
    Are the LEDs on?

    You can also remove the battery and was able to connect the laptop to the power adapter and could check if the laptop turns on.

    Good luck

  • Satellite A100 does not start - no action

    Hello

    I have a Toshiba Satellite A100, which does nothing. He went flat when he was asleep, and a few minutes later I plugged it and when I press the power button / nothing happens. I do not show that the battery recharges in illuminating the charging light. The power button does not illuminate.

    If I hold the power button for a long period of time, a few lights.
    The caps lock light. Light under F10 and F11 and wireless internet light keeps coming back even if it is disabled.
    Battery light comes on a few times, but it is wider than on.

    My thoughts are that power don't is not computer (I think than lights that come on are those who come usually on after you press the power button) I'll try and the hand to get on another charger to try but snacks that don't work there at - it suggestions?

    DESPERATE isn't my computer!
    CJ15

    Hmm can be a motherboard problem.

    Try reinstalling the memory and battery and see how it goes. If not, send it to an ASP for a quote.

  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

    iPhone 6 with iOS9.3.4.

    WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

    You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

    Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

  • My MacBook Air does not illuminate

    MY MacBook Air does not illuminate?

    Nothing happens when you try?

    Power light?

    Tones? Startup chime?

    If you connect to the charger, which is LED color on the card?

  • iMAC does not illuminate

    MY iMAC, which is several years old does not illuminate

    Take the test/diagnosis. Nobody here can 'pull' hardware problems.

    Barry

  • 2009 iMac 21.5 does not illuminate

    My 2009 iMac monitor is black and does not illuminate.  It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?

    Try to zap the PRAM or reset the SMC.

    Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset   

    Otherwise, take the model to your local store from Apple or a DAD.

  • New Ipod Touch does not illuminate

    Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

    Try the following steps:

    1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
    2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
    3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
    4. Be sure to contact the Apple support if you need more help.

    Good luck!

  • Toshiba 40 L 345 * DB does not illuminate

    Hi guys,.

    I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.

    Any thoughts?

    Rgds

    Kedders

    Originally posted by Kedders
    Hi guys,.

    I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.

    Any thoughts?

    Rgds

    Kedders

    Hi Kedders,

    I just encountered the same problem. While watching the TV, it shuts down suddenly. Even model & 18 months and now dead. If I leave it plugged in now, we get the same thing - the power switch flashes between green and Red intermittently seconds or - but no picture at all.

    What's wrong?

    Kind regards

    Chris_UK

  • Satellite Pro C660 does not illuminate

    Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

    any suggestions?

    Hello

    On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
    After doing this connect the power running and try to start again.

    What happens when you do this?

  • Satellite L500-1DT does not illuminate

    My laptop does not illuminate unless the switch the off market cable is disconnected and the connections are bridge on the motherboard. Any suggestions please?

    You start your mobile phone if the battery is removed and the laptop connected to the power supply current only?

  • Satellite M30X-127 does not illuminate

    Hello

    Need help!
    My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
    The guy there offered my 100 pounds for to buy me.
    Please a little help. What should I do?

    Hello

    Otherwise you will search in ebay for the second hand with the good motherboard unit.
    Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
    You can try to use second hand motherboard in your laptop.

Maybe you are looking for

  • MacBook Pro retina 2015 randomly freezes when try to watch the video

    Hi all I bought a MacBook Pro Retina early 2015 model and is currently under OS X 10.11.4. From day one, it has been an inconsistent issue where my Mac everything would freeze whenever I try to play a video. This moved not always so I thought that th

  • Satellite A200-1TW: noisy cooling because of dust module

    Hey,. My fan getting stronger day, and I think it's because there is a lot of dust inside my fan.I have my laptop for about a year now and live in an old house (= a lot of dust), so I was wondering: are at - it a tutorial somewhere on how to open it?

  • Abandoned Dm1 now won't start up

    My son fell from his laptop. It froze and it turned it off until I could get a look. It starts but hangs on the windows start page. I took the battery and tried to reset several times without success. Is there something else I could try or should I t

  • Add lines to a 2D array

    Hello evryone! I have a 2D chart and I want to add all the lines of it to make a 1 d table. For example if the 2D table has 2 ranks as: 1 2 3 4 6 7 1 2 The table 1 d of output should be: 7 9 4 6 Is there a way of easily available 2 that in Labview? T

  • help can't do or read dvd or cd

    I have a fujitsu Windows vista and something happen when I try to play or merake it says I don't have a cd or dvd! where she go or where can get another