Equium A100 - error NMI with pen drive

Similar Questions

• Equium A100-338, replacing the hard drive

  Hi, the hard drive from my Toshiba Equium A100-338 just broke down on me, and now I think to replace. Because I'm not good material, I thought I have ask for advice about it here first. Is this an easy repair that can be done on your own? If so, how can I know if my computer match which new hard drive? I know that I need a 2.5 inch Sata-150 and all that, but I'm not sure of the compatibility.

  In addition, it is worth the money to make repairs like this on such an old computer? I wouldn't throw it out when everything else seems to work very well.

  Hello

  In the Toshiba forum you will find here with some nice instructions how to replace a HARD drive on the different laptop models.
  I found a movie that explains how do on Satellite A200.

  Replacing the HARD drive is not very delicate, and the process is similar for all models of laptops.
  Check it out:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=120

• Equium A100-147 - deleted CD/DVD drive

  I uninstalled the readers of DVD/CD ROM of my Equium A100-147 model PSAABE by mistake. How I can I restore it? I'm not very technical

  Hello

  It means that your CD/DVD drive is not more?
  Have you already checked the Device Manager if the drive is visible or not?

  Otherwise, you must follow the instructions in this Microsoft KB article:
  http://support.Microsoft.com/kb/314060

• Tecra 9100 - error IDE with new drive

  I want to use a burner DVD UJ - 820B on my Tecra 9100, BIOS-Version 1.6.
  If I change the UJ-820, I have IDE #1 error in the Bootscreen, and the device is not recognized.

  No tool or the update for this problem?

  A #1 IDE error normally if a wrong settings or connection together.
  So I think that the disc is not compatible with the laptop.

  Look in your user manual and choose a drive that is listed in the manual. Not every drive is compatible with any laptop.

• Equium A100 - error PVAT Win7 - last updated

  My last http://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=70485 wire go locked before I had the chance to bring something, I hope that I will not upset the Mods by bringing this place again.

  In any case, after the installation of the new bios version 6, I was able to install PVAT 1.2.40 successfully. I installed only, utilities, energy saving & support button. Now when I press the Fn key I get a sort of bar tasks appear at the top of the screen, indicating that all the function buttons do. When I set the screen it tells me where I am located.

  Well satisfied with the result, thanks for the advice everyone.

  Thank you for your comments.

• Need driver Bridge Media slot for Equium A100

  Hello!

  I have Toshiba Equium A100-147 and have no driver for Bridge Media slot.
  I downloaded it from the download from Toshiba site, but it does not work!
  Please help me!

  Hello

  What does not work? You are not able to install the driver or the slot not reading cards?

  On the page of the Toshiba driver are placed 2-conductor. Be sure you use the right one.
  Plug then the good card in the slot and then try to install the driver.

  But what do you have on the laptop? Did you install the new OS? If yes then check the instruction install driver from the Toshiba page?
  I've installed several times the OS manually on my Satellite and I have always followed the instructions.
  It's important document and if you install the drivers manually you need to follow this guideline.

• Equium A100-338 display has stopped working

  Hello

  I have exactly the same problem on my Equium A100-338 loaded with Vista.
  The display has stopped working (he went to a poorly lit black screen) after I had rebooted my machine even if the computer and the hard drive seems to work Ok with the lights on. I tried the usual elimination of power and the battery and restart it tricks, but after initial success it has stopped working after a few weeks.

  Once I had the computer operation that I only closed it down in the mode 'sleep', and he continued to work for a month until that he should be released after a windows update. I then plugged an external display and use of the Fn + F5 key got the external display running.
  Low and behold, the screen of the laptop started working again as if it had been "energised".

  I took what the laptop screen was OK and that he would not need replacement.
  The laptop worked OK until it needed to restart another when the unrest started again. The screens are gray on the monitor and the laptop now.

  These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  Now, I bought another laptop Toshiba Satellite to connect to the forums trying to find out if my original computer can be repaired
  These problems seem to be quite common on Toshiba computers.

  Any help members would be welcome.

  > These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  For the most part a graphics card driver must be reinstalled or updated to a newer version it can also be a problem of OS which means that the new facility could help
  But try to update the display driver

• Equium A100 - where to get a new card controller for Hitachi hard disk?

  Hello!

  I have a Toshiba Equium A100-338. The hard drive is now broken. The problem seems to be with on the hard drive controller card; the device gives no response when I try to plug the hard drive into the other computers with SATA interface. There is reason to believe that the drives are OK; they begin to turn when the power is on, and they do no harm to sounds.

  I really want to save the data on the hard drive.

  So my question is: does anyone know where to buy a new * HTS541610J9SA00 * (Hitachi 100 GB 5400 RPM 8 MB buffer SATA drive hard laptop 2.5 "), so that I can use the controller of this unit to get access to the data on my hard drive?

  J O

  Have you tried Google? Usually using Google, you will find everything you want.
  Just use HARD drive model name and I am sure that you will find an online store where you can buy new HARD drive.

• Equium A100-147: large screen display resolution is not available?

  Hi, I recently bought a laptop A100-147 - accepted a view model that I had trouble getting one of them. On the beautiful screen, the screen resolution is 1024 x 768 - that it and 640 x 480 and 800 x 600 are available. This sounds awfully stretched.

  Is this correct? Or do I have to create a different graphics driver that allows me to select a screen resolution?

  Thank you.

  Hello

  According to the description of the Equium A100-147 comes with color Wide XGA TFT 15.4 TruBrite display ". The standard resolution of this monitor is 1280 x 800. If you dot have this one please install graphic driver. You can find it on the download page of Toshiba under http://eu.computers.toshiba-europe.com support & downloads.

  I can't imagine that it happens after the first start. You have preinstalled your own operating system?

• Equium A100-337: what model should I choose Download drivers?

  Hello

  can someone tell me what set of drivers to choose for the model A100-337 when I get to the drop-down list that gives me the choice between PSAA4 or PSAAB?
  Lie, I want to download the most up-to-date versions.

  Hello

  The serial number of the Equium A100-337 begins with PSAAQE.
  You can find the number at the bottom of the unit
  I put t know why your laptop model is not listed in pilot form, but you can see other drivers for PSAA4 and PSAAB.

  Perhaps the only drivers will run.

• Equium A100-147 with error message "PXE - E61 Media Test Failure"

  Hi all

  I Equium A100 out of warranty due to the error message "PXE-61 Media Test Failure" I took it to my local computer Lamplighter, told me my Toshiba 60 GB hard drive failed (MG6034GSX) and replaced by another 120 GB model.
  I tried to reload the Toshiba Recovery disk system, reload reached 75%, then the messages come in saying that it does not find a lot of operating system files.
  Thinking the recovery disc was faulty, I got a replacement from Toshiba, and this reload disk gave the same problem.
  I loaded XP Professional on the 120 GB HARD drive and it works OK but I'd like to load original as it came with XP MCE.

  Is my problem the 120 GB HDD which should be as original 60 gb and a HDD for Toshiba genuine to accept the recovery media?

  Does anyone have any ideas, I would really appreciate your help.

  See you soon
  diggermender

  Hello

  Don t think that it is a problem of restore CD is normally impossible
  I think that the problem might be related to the HARD drive.

  First of all, you need to access the BIOS and should set the defaults (don't forget to save it).
  Then try to format the whole HARD drive and also remove the created partitions.

  Then you could try again installing the OS from the recovery CD.
  Usually, this procedure works fine

  Good luck

• Equium A100: CD/DVD drive wont read - D:\ error message is not accessible

  Hello.

  My cd/dvd rw drive will not read certain DVD/CD-ROM. I bought my equium (A100 I think) laptop, nine less than a year ago and have had this problem since I got it. The disk which do not work on the laptop work fine on another pc / dvd players, if the disc is not defective. At first I thought that it would be a driver issue because some of the disc worked fine, so I never got the laptop back to the store I bought.

  A message appears "D:\ is not accessible. The request could not be performed because of an i/o device error".

  I recently just got internet installed in my house and I went to the toshiba site to see if there are newer drivers that would solve this problem. I downloaded a bios update and an update of dvd ram and installed, but am still having the same problem.

  Can someone help me cause am totally stuck on what to do now.
  Thank you.

  Hello

  As you have probably not known the CD/DVD drive support not all backgrounds.
  In the user manual, you will find a list of supported CD and DVD

  But I assume that you are the reader cannot read certain media because of the impure registry as this other thread mentioned:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868

  Please check that the user holmdps has solved this same problem.

• To upgrade Equium A100-027 with 120 GB HARD drive

  Hi all

  I am looking to upgrade my Equium A100-027 - HDD to 120GB unit

  can anyone of you inquire as to which unit of HARD drive, I need this upgrade

  best regards

  Hello

  The A100 series is one of the new series of laptop that exists on the market. So I see problems with the upgrade of the 120 GB HARD drive
  Please note that the phone supports an interface Serial ATA (SATA) and the new HARD drive should also supports this type of interface.

  have a nice weekend ;)

• Serious problem with driver i810 Equium A100-306

  I have a new Equium A100-306 and I try to install two different Linux distributions:
  10.1 (x86_64) SUSE and BlueWhite64, but in both cases, I met the same problem:
  When you restart the Xserver, the computer stops responding.

  I used the i810.
  This is not the case with the vesa driver.

  lspci reports:
  00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
  00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
  View 00:02.1 controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)

  Hello flora

  Before you wait here for a long time trial learn more about Toshiba Linux pages:
  http://www.Linux-laptop.NET/Toshiba.html
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://newsletter.toshiba-tro.de/main/index.html

  Good luck!

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye