Equium A100 - Infra red connection for mobile phone

Similar Questions

• BT connection between mobile phone and Satellite A100

  I have a Satellite A100-225. What should I do for my computer to be able to make a link to my mobile phone?

  If anyone can help, it will be great.

  Course, your mobile phone must support Bluetooth. Check if your laptop is Bluetooth built-in, otherwise, you can use a USB bluetooth adapter for example. You can find the most appropriate for your laptop in the "Product information" section of the Toshiba bluetooth site:
  http://APS.toshiba-tro.de/Bluetooth/
  The latest version of the software that you can download from the download section of this Web site. This software lets configure you connection BT mobile phone.

• F20-137: Bluetooth does not work if connect my mobile phone

  I recently bought a F20-137 for my son and when I hack with her at Christmas bluetooth apeared in configfree, but today I decided to try and connect my mobile phone via bluetooth and there is no bluetooth option in configfree where it should be according to the configfree help file.

  It's like bluetooth is not yet installed.

  someone knows how to solve the problem? I tried to look for drivers for my model of laptop bluetooth stack, but it was not available on the toshiba site and configfree versions I found on the toshiba site are and build older than the version already installed.

  Hello Luke

  According to the specification for F20 - 137 the unit doesn't have Bluetooth. To be sure to check if you can find the label of BT in the lower corner.

  It looks like http://support.toshiba-tro.de/KB0/FAQ35007I001WR01.htm

  Good bye

• I can't connect the mobile phone as GPRS bluetooth modem

  MSI Wind U100 laptop (toshiba bluetooth module is built in)
  MS windows XP Professional SP3
  Toshiba bluetooth stack 6.30.01

  I can't connect the mobile phone as GPRS bluetooth modem. I tried to connect certain phones. But all the time the same problem:

  After finding mobile phone in the list of available devices, notebook coonects him. But at the same time, "coonecting COM 40 failure, try again".

  I've read about this problem in the user manual, but I am not understand, how to solve a problem.

  PS Sorry for my bad English

  I recommend you take a look at the next document if it has never worked before:
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  You can find in the section "how to resources" from the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/

• where can I find the driver of Windows 8 for mobile phone Pantech P6030?

  Where can I find the driver of Windows 8 for mobile phone Pantech P6030?

  Currently, there is no Windows 8 driver for mobile phone Pantech Renue P6030.  However, I download pictures from a Pantech Renue by connecting the mobile phone to a computer with Windows 8.  On the phone screen a menu popped up.  I chose mass storage link that connected to the computer, File Explorer.  From there, I did some limited tasks which enabled me to copy the images on my cloud.  Not all features are on the Explorer of files to allow downloading of all the pictures, but accomplished most of the tasks I wanted to finish.

• Satellite Pro 6100: Bluetooth - how to connect the mobile phone

  I already have a satellite pro 6100 with the bluetooth software on. I tried to connect to my mobile phone without success. The problem seems to be with the laptop rather than the phone.
  How can I connect successfully. I have to update the new drivers? I bought it refurbished 3 years ago and I'm just getting round to the use of bluetooth!

  Well, the Bluetooth software has been installed on your laptop, BUT the question is:
  Your group has installed Bluetooth card?

  AFAIK the Bluetooth is an option available on this unit. You must check the Device Manager and check the bottom of the unit if the Bluetooth label has been placed.

  I think that you cannot connect your mobile phone because BT is not available.

• Construction of a sensitive site for mobile phones - my first try.

  It is my first try at building a sensitive site in Dreamweaver CS6 for mobile phones, tablets, etc. From now on the page "fluid - grid.css", I have the media query to: "@media screen alone and (min-width: 481px) ' I built the entire site with this size in mind, but I found it's always appear a little too big on my iphone 5 c.»» It looks to the '(min-width: 481px) ' must have been fixed in "(min-largeur: 321px)". " To do this, I will have to start all over again with the site or can I simply change this on the css page?

  Thank you!

  Mike

  Grid layouts of fluids are built on the mobile first principle.  In other words, you don't need to specify the device width b/c this is the default layout.  First, you need to create because everything is based on that.  It ranges from 0 - 480px wide.

  Then, you build your formatting of Tablet.  DW automatically creates the media queries. Usually 481px to 768px.

  Finally, you build your office layout, new DW creates queries from the media for you. Usually 769px - 1232px.

  That said, you should never (I mean ever) alter master key or code FGLayout.css (all that you named it).  If you need to customize the styles of backgrounds, typography, etc., you must use a separate external style sheet.

  FGLayout code is very temperamental.  The more experienced coders have trouble with it.  So just don't be tempted to waste his time with her.  You will have less problems like that.

  Nancy O.

• Connection Bluetooth for mobile phone disconnects every hour

  I connect my laptop to my cell phone (Palm Pixi to be exact) via Bluetooth and use it as a wireless router to connect to the internet. This is my only form of internet I have here in the Woods (Yes, I have cell phone coverage, but no cable/DSL). The only problem I have with it is that the Bluetooth connection is reset every hour since when I first connected to it when I turn on my computer. Normally, this isn't a problem for web browsing, since it will automatically reconnect, but I do a lot of games with her and sometimes download large files, and this reset can sometimes extremely boring all at stake in the middle of a fight and is enough to kill a large download. I searched Google many times on how to change the login/timeout settings and haven't found anything useful. Is that what I can do to change how long the Bluetooth remains connected without discount to zero/expire?

  I run Windows XP SP3 and I stack Bluetooth version 4.00.38 (also tried the latest version, the same question).

  Thanks in advance for any advice.

  What type of connection do you have on your mobile phone (DUN or NAP)?
  As far as I know there is time to stop for the connection of ONE of the side BONES (it was at least the case in XP).

• How to connect to mobile phone lgku990ig

  How can I connect to the phone with my pc

  Hello

  To sync your LG phone with Windows 7 computer, you must install LG PC suite application.

  Check out the following link to download the PC suite application.

  http://www.LG.com/in/support/mobile-support#

  For more help, you can contact the LG support:

  http://www.LG.com/in/support/contact-customer-support

  I hope the above information helps!

• Equium A100 - 01 M - drivers for Windows XP or Vista?

  I've been looking for driver for Toshiba Equium A100 - 01 M model: PSAAQE-00300HAV for XP or Vista but have been unable to find. I went to the toshiba site to get into the details of the laptop in the drop down menu list but when it comes to the all do, it gives you for an Equium Series is an A300 and A300D whose it is or.

  Any help on this I would be very grateful, I searched hundreds of sites which some download drivers and end up being updaters and driver finder that's not what I'm looking for.

  Hope someone can help out me.

  Thank you for your time.

  Hey,.

  The drivers are always placed on the Toshiba Web site, but you should look in * Archives *.

  Here again:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  * Archive * > Equium > Equium A series > Equium A100 > PSAQQE

  Check this box!

• Satellite M40-237: how to connect the mobile phone with Bluetooth

  I have a new Noki 62333 and I have a Toshiba Satellite M40 - 237. I have a big problem with the connection between them. I put t know how to turn on bluetooth on my pc. Can you help me???

  Hello Iva

  A friend of mine has Satellite M40 and I know that this unit is shipped without BT module. If the unit has BT module, you will find labels of BT on the underside of your laptop.

  To establish a BT connection with his mobile phone that he uses the key USB BT.

  By the way: fact Iva comes from Zagreb, Croatia?

  Good bye

• Allow other users to connect through my internet connection of mobile phones.

  Quite simply, I'm setting up my xbox live to run through my internet connection of mobile.

  When I select the check box to allow other users of the network to connect through this computer's internet connection it turns off immediately, so is not enabled.

  I tried disabling the firewall etc to see if it limited the ability of sharing, but it did not work.

  Any information or help would be greatly appreciated.

  Hi Stewart,
   
  Please go through the article below which will help you to connect to windows live using your internet connection for your laptop.
  How to connect your Xbox 360 wired controller to a computer running Windows
  http://support.Microsoft.com/kb/906347

  Please also see the link below. This could help you.
  http://support.Microsoft.com/kb/978618

  If the problem persists, I suggest that question you post you to Xbox forums.
  Xbox support

  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

  http://www.Xbox.com/en-us/forums
   

• Download bluetooth and sync for mobile phone

  My Sync Center does not recognize my phone and bluetooth appears not

  Hello twiggyontheroute,

  ·         What is the Mobile phone, you try to synchronize with your computer?

  ·         You have the following Mobile phone installed on your computer?

  Site of the manufacturer of the system for the update or current ___Check drivers for Bluetooth and control software. Try to update the drivers.

  See the links for more information below:

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected when you click on the element:

  http://support.Microsoft.com/kb/960531/en-us

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Any license of Connect for Mobile

  Hello

  I have a couple of units of ASA5525-X with premium VPN licenses, now when I connect with connect any customer for Androind. I get the message that I don't have a License.

  I found an old thread on this forum that suggests that if you have a Premium VPN license, you should be able to request a license of base as well, but I can't find where I can do or if this information is correct.

  Hello

  Later, you need to order an additional license, called 'AnyConnect for Mobile' order to use mobile devices to connect over Anyconnect.

  But in 2015 has changed the license for Anyconnect schema. Today, "AnyConnect for Mobile" license has expired. I'm not sure if it is possible to order the license today.

  According to the new licensing scheme, you must migrate Anyconnect Premium license for a new licence, called "Anyconnect Apex". With the new license "Anyconnect Apex" you don't need to have "AnyConnect for Mobile" more. Mobile devices will be able to connect using the Anyconnect client.

  Anyconnect Premium Anyconnect apex migration is free.

  But please, attention, the new licenses are subscriptions. So, after the migration to the Apex licenses, you will get a subscription for 3 years. After 3 years, you will need to renew your subscription, and it will be not free.

• Connection WIFI mobile phone to the laptop, so I can access the web of the cell

  My laptop is connected to the internet by internet dongle, I want to connect my cell phone to the laptop via WIFI so I can access the Internet from the mobile phone, how to put in place on windows 7?

  You can configure a network hosted with your Windows 7 machine. Here are a couple of free GUI frontends to the netsh commands that implement this. These turn a computer into a virtual router Windows 7 wireless.

  http://virtualrouter.codeplex.com/

  http://www.Connectify.me/index.html

  Assuming that your USB dongle is a device high-speed 3G / 4G, you might also look into buying a router. Some examples...

  http://3gstore.com/index.php?Main_Page=index&cPath=35

  The advantage of the router, it is that you need not the Win 7 PC all the time so that your other devices have access to the public internet.

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »