Equium A11-233 low power alarm settings
Equium A11-233 I reset power in different ways, but the alarm of battery time/% always light up 10 min left no message. I put manually for 3 4 or 5 mins and display a message, but it still alarms at 10 min. without message all dears? There is a checkbox? Thank you orion f 6.3
Post edited by: orion f 6.3
Hello
Have you also selected the power mode has changed?
I want to say the laptop use the mode that you have changed?
Maybe the alarm of food has been changed, but you don t use this mode. First check
Tags: Toshiba
Similar Questions
-
Lack of power low warning alarm
My Windows Vista Ultimate Edition with service pack 2 does not appear to be a way to activate the audible alarm of low power. I lost the job because the computer stops unexpectedly.
Hi Nortalian,
You can check the link below which might help.
Alert battery 'Low' and 'Criticism' does not sound on a computer Windows Vista Basic
http://support.Microsoft.com/kb/950161You can check out the similar post in the link below.
http://social.technet.Microsoft.com/forums/en/itprovistadesktopui/thread/f6130ba3-ebcf-4AF2-81cb-028ed46d195bPlease post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP -
Satellite L40-139 - possible to disable the low battery alarm?
I have a Toshiba Satellite L40-139 it comes with Windows Vista running. I think the battery is now a little age, because it does not load when the computer is plugged in - although the computer itself is capable of functioning when it is plugged in, which is how I use it.
Battery sank to about 10%. For this reason, the computer will sound low-battery-warning beep every fifteen seconds or more. This seems to come from the computer itself and not the operating system, it sounds different from low battery alerts in Control Panel > sounds.
I would like to disable this beep - it is not to tell me anything I don't already know. Until now, the only way to achieve this, I have found is by inhibition of the laptop altogether. But is not ideal, because it means that I can't use any other sound feature on the computer.
I tried, without success, changing the settings in the control panel > power settings, including lower low and critical battery levels and fix warnings for low battery to "off".
Any ideas?
Hello
Please check the BIOS settings.
To access the BIOS F2 press Mobile start upward.
There should be an option called something like low battery alarm
Remember to save the changes before exiting the BIOS. -
TECRA A11 - listener low sound quality up to THE
Tecra A11 provides * low sound quality * (iTunes) connection to my hifi system * via Headphone out to THE * in. An Apple MacBook connected in the same way does much better. No idea how could improve the quality? Thanks in advance!
Hmmmmm... have you tried to change the sound, equalizer settings of player?
Open Control Panel and make sure is it y audio Manager Realtek (Realtek sound card) and play a bit with the parameters of sound effects. -
Impossible to activate the mode of low power on iPad 4
I can't activate the low power on my iPad mode 4. There is no option to do so, when I select the battery menu im settings. Any ideas why this happens?
Low Power Mode is only available for the iPhone or iPod may as well. iPad did not have this option, trust me. I use iPad and I don't have this option as well!
-
Find the replacement battery - "low battery alarm.
I'll have to re - use a PC that has a 'bad' C-drive for now was "butterfly of the night-balled" years, but at least it market, becuse of the XP Virus on my machine good 2012. Man, is that what noise disc c, etc. etc.
Anyway, I was wondering, since I get a "low battery alarm" & the date resets to 4 January 1980 on every power-up, WHERE can I find a replacement battery (spare parts) for this old HP PC?
the model is:
HP-Compaq d530 5FF
HP s/n 2UA41507CA
p/n DG058A #ABAThank you & God Bless, jim
I don't know why you came on a Windows forum instead of going directly on the HP site, but what I've found, is that HP lists 3 different models with the d530 designation:
HP Compaq d530 Convertible Minitowers desktop PC
Small form factor HP Compaq d530 PC desktop
Desktop HP Compaq d530 slimline Desktop PC
Look at the pictures and decide what is yours.
You can download the "hardware reference Guide' for each page linked to above.
Guides for the first two describe the battery replaced and describe it as a "3-volt lithium button cell battery." The guide for the 3rd model does not mention the battery, but I would be very surprised if it isn't exactly the same as the other two.
In all cases, the exact model of the battery is not shown. This is very probably a CR2032, located practically in any pharmacy chain in the United States, including the CVS and Walgreens, as well as places like Radio Shack and, of course, online.
Download the manual of your computer, open it and find the battery. The model number will be carved in relief in the surface of the battery. If it does not say: CR2032 just search the net. This is one of the many maps equivalent of battery: http://www.maxell.co.jp/e/products/materials/replacement_e.pdf
Note the number on your battery, and its equivalents in the table and visit your local pharmacy or the favorite online shopping site.
-
I bought a "BOLD" 6 days - my first smartphone - there to replace a 4 year old Nokia.
The installer went well and I associated with several e-mail accounts in the phone. All the seemend very well until this afternoon when the battery power has fallen sharply, low power icon came and then the screen went white and locked upward. The phone was on but just sitting on my desk, when he does this. The phone wouldn't stop or anything once the screen went white. I plugged in the charger and it is now loaded.
However, many of the icons on the home page and expanded home page disappeared - messages, all messaging files, browser, call log, etc. I can't find them anywhere. In addition, all the e-mail settings for the 4 accounts that have been implemented have disappeared as are all of the messages that had been saved.
Backups of the messages so I am not concerned to retrieve their content in the phone itself. However, how can I get the icons back so that I can access the features of the phone? This is a common occurrence when the battery is low? Everything seems to happen 40% white screen in 3 hours during which the phone was not on active service in terms of excessive electricity consumption.
I can't find anything to help in the guide of the user or the site. Thanks for your comments.
Hello and welcome on the Blackberry Forums
Please reset the unit, remove the battery for 30 seconds and install again.
To optimize the memory and battery read this link
http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB14320
-
Warning of low power for AIR-LAP1242AG-C-K9
Hey Buddie,
We bought a few AIR-LAP1242AG-C-K9, but not perchasing no matter what wireless controller. When I connect the TOWER to the port of Cat2950 or Cat2960 TRP, all the TOUR cannot start normally. It shows low power, please consult the attached two images. But if I use the external power cable, the TOUR can work well. So, I would like to know two things.
1. can I use stand-alone TOWER without using the controller?
2. If the above is Yes, how can I configure the PPoE on cat2950 to TURN Support correctly?
Thank you very much.
Hi Jian,
Q. can you a RIDE operate independently of a wireless LAN (WLC) controller?
A. No, towers may operate independently of the function WLCs. tours in conjunction with a WLC only. The reason is that the WLC provides all the configuration settings and the firmware that the TOUR needs in the process registration.
So you will need to return the AP and download the version of IOS, buy a WLC or convert the TOWER to IOS :(
Q. how to distinguish between a regular (standalone) AP and a TOWER?
A. the best way to distinguish between a regular access point and a TOWER is to look at the reference number of the AP.
LAP (AP light Protocol [LWAPP])? The numbers always begin with AIR-LAPXXXX.
Autonomous AP (Cisco IOS? Software)? The numbers always begin with AIR-APXXXX.
This doc. good Q and A
http://www.Cisco.com/en/us/products/HW/wireless/ps430/products_qanda_item09186a00806a4da3.shtml
You can convert an access point of the mode light return to autonomous mode by loading a Cisco IOS version that supports stand-alone mode (Cisco IOS release 12.3 (7) JA or earlier version). If the access point is associated with a controller, you can use the controller to load the version of Cisco IOS. If the access point is not associated with a controller, you can load the version of Cisco IOS using TFTP.
By using a TFTP server to revert to a previous version
Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:
--------------------------------------------------------------------------------
Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.
Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.
Step 3 Rename the access point image file in the folder of the TFTP server c1200-k9w7 - tar.default for a series of 1200 point, c1130-k9w7 - tar.default of access for a series of 1130 access point and c1240-k9w7 - tar.default for a series of 1240 access point.
Step 4 connect the PC to the access point using an Ethernet category 5 cable (CAT5).
Step 5 disconnect the power to the access point.
Step 6 push the MODE button and hold the button while you reconnect power to the access point.
Step 7 hold the MODE button until the status of the LED turns red (approximately 20 to 30 seconds), then release.
Step 8 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.
Step 9 after the access point reboots, reconfigure using the GUI or the CLI.
This doc.
I hope this helps!
Rob
-
Recorded a few videos in mode low consumption. There is no audio signal in one of them. Low-power audio turn off mode? I'm a new user of iPhone still learning on the dev
Hello taneikab,
Thank you for using communities of Apple Support. It is my understanding that videos created on your iPhone in low power Mode are missing audio. I know his is a very important part of videos. I'm here to help get this resolved with you.
Low power mode disable audio, so you should be able to hear sound on records. I recommend that you test your microphone using the instructions and images in the link below.
Get help with the microphone on your iPhone, iPad and iPod touchIf the microphones work, but the problem persists, restart your iPhone. This can solve many unexpected behaviours. Follow the steps below to restart.
- Press and hold the sleep/wake button until the Red slider appears.
- Drag the slider to turn off your device completely off.
- Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.
Restart your iPhone, iPad or iPod touch
Here is some more information on what to expect in low power Mode.
On iPhone Mode low power on your iPhoneHave a fantastic day!
-
Guys, it is advisable to use low-power mode even if it is not yet on 20%? What will happen then?
It uses less energy than if you don't.
-
Low power mode will affect the performance of the camera?
I take my iPhone 6 on a trip backpack my camera. I intend to put the phone in airplane mode and I wonder if I should also set low power mode. If I put it in low power mode, it will reduce the performance of the camera?
I suggest that you test this configuration by yourself before you leave.
You can also consider taking the external battery back up like those manufactured by mophie.
-
low power mode is on but the battery is full
My Iphone 5 c run 9.3.1. When I switch on the low power mode, it restricts my auto-lock to 30 seconds (it is grayed out). The problem is with the low power mode on, my battery availability is 98% (appears in yellow), but the low power mode should be committed only to 20% or decrease of availability. How do I fix it so low power does not come on until I get low on battery reserves? Thank you!
No matter how much energy batttery you left, if you activate the Low Power mode, the indicator lights yellow. My iPhone 5s has 80% battery left and I turned on the low power and the yellow light.
Look at the screenshot of the iPhone here.
-
IPhone moves (steps) when low power mode
When low power mode iPhone disables the features to save battery.
It neutralizes movement and fitness (follow-up phase) too when low-power mode?
Here's what it shuts down:
-
Satellite T130 - turns off because the low power
My 130 just turns off without notice because of the low power, but it shows remaining 40-50% power bfore, it turns off. What is wrong with him?
Also there is no warning of low power, it just turns off. Any ideas?
Hello
That s really strange and I've never heard of this problem...
You use a Toshiba original AC/DC adapter?
Have you checked the Web from Toshiba website for updates to the BIOS?
Have you tested the same with OS preinstalled Toshiba? -
How to restore Equium P200 1IR back to factory settings?
Please, I would like to know how to restore my computer toshiba laptop Equium P200 1IR back to factory settings? Because he's been to slow down.
Thank you
Verb
Hello
You need the recovery disc!
The recovery disc you will format the whole HARD drive and install the image of Toshiba on the HARD drive.
Toshiba image contains the operating system Windows, drivers Toshiba and other tools and utilities.
You need boot from the recovery disc and should follow the instructions on the screenAll that s
PS: read other discussions here in the forum and learn...
Maybe you are looking for
-
I moved my Gallery of Photos on an external drive, changed the location of the external library and deleted my copy on the hard disk. I tried to empty the trash, but he just hung. After looking for an answer, I found a post that suggested using the t
-
Portege R600 - problem of Blacklight
I can see the screen faintly on the laptop and clearly a connected external display. Also, if I press the button right above (which has a kind of symbol on it), the backlight lights up momentarily. I have reset all parameters display default and foll
-
Trial Apple music always offered
When configuring iTunes on new MBP retina, the free trial for three months of Apple's music was presented. During logon and check my iTunes for billing information, the option to TRY button was used. However, when you select the auto-renewal plan, t
-
How can you correct Assistant scanner and digital camera & it stopped working to transfer my photos from an sd card to hard drive...I have Windows XP and when I insert the sd card I have a beep as usual, but then nothing happens...don't open the box
-
I found photo 58 for around 450 HP cartridges and do not know where to insert them as it ha it'sbeen ages since zi used the printer. It is in the black slot or tricoloue?