Equium A110-233: black screen and no HARD disk activity

Hello

problem trying to trouble shoot A110-233 for a friend. When you switch on the button lights up, don't have cd activity but no activity of HD and black screen.

I have a two beeps beep message can not find the error codes to display errors, but I guess that's an error code.

I tried to connect to external monitor but no output.
I think that it is a possible motherboard failure.

Any ideas would be appreciated

> I think that it is a possible motherboard failure.

I agree with you that it really looks like a malfunction of the motherboard.
This could be the worst case because the motherboard needs to be replaced
The motherboard is on the more expensive laptop parts and I'm sure the replacement would be a costly affair.

But it seems that the unity of the A110 is not very old. Eventually the warranty is still valid, and everything can be done for free?  :|
You should definitely contact the ASP in your country to clarify this point.

Good luck

Tags: Toshiba

Similar Questions

  • Satellite 3000-214: after CPU upgrade no screen and no HARD disk activity

    Hey all,.
    I have a 3000-214 Satellite that comes originally with a PIII-M 933 Mhz. (SL5CG)
    http://videoff7.free.fr/sl5cg.jpg

    I ordered on eBay a second hand replacement (1133 Mhz) CPU SL5CK. (same number of pins, the same processor family: RH80530)
    When I go in, the laptop starts, but there is nothing on the screen and no HARD disk activity.

    So I asked the seller if he had tested the CPU, it sent, he said no and sent me 2 CPUs of replacement, another SL5CG and a SL64Z (which does not appear on the Intel site for some strange reason, but which is of the same characteristics as the SL5CG..)
    http://videoff7.free.fr/sl5ck.jpg
    http://videoff7.free.fr/sl64z.jpg

    The two processors give the same result with nothing on the screen and no activity of the HARD drive either.
    I checked my BIOS, it is the latest version: 2.30.
    Some laptops in the series 3000 Satellite (e.g. 3000-601), are delivered with a 1133 Mhz CPU (SL5CK) and also share the same bios exactly like my 3000-214. (upgrades to the bios on Toshiba website for my 214 & 601 are the same exact links and MD5 are equal). Also the 3000-601 & 3000-214 share the same chipset: Intel 830MP.
    But for some reason, it does not.

    EC which could I missed?

    It is always possible that all 3 processors that I was sent by the seller are dead, but it would be strange at this point, I think.
    So my question is, anyone have any idea what I might try to work or have experience with the upgrade a Satellite 3000 CPU?

    My warranty is looooong Sub anyway, so if a Toshiba employee could check in the basis of how fast max CPU can be used on the Sat 3000-214, I would be very grateful.

    Thanks a bunch for any info.
    Kind regards

    Alcahest

    Hello

    I studied a bit in the web and it seems that the Satellite 3000 has been bundled with Intel Mobile PIII 800, 850, 900, 1000 MhZ CPU

    I think that this will not work because of the speed of the CPU.
    In addition, I found this Toshiba document:
    http://support.toshiba-tro.de/KB0/FAQ5300W5000XR01.htm

    It is said that it is not possible to replace the processor in a laptop Tosh because processors are connected to the motherboard using a process called TCP tape carrier package.

  • Equium L350 starts (led on) but no HARD disk activity

    Hi all

    I got this Toshiba Equium L350D since September 2008 and it has not been used often, it worked fine two days ago, but yesterday I turned on it, with attached cord and the "cap" light came and was solid, and has therefore the power and battery indicators, I could hear the fan and the light on the cd/dvd was on. But that's all, no hard disk activity at all.

    I could not turn off without unplugging the power cable and remove the battery as the power button does not seem to make a stop if pressed during 10 seconds.

    All the advice, set apart from taking it to a repair center, because I really don't want to spend too much money on it.

    Hi dude

    I think that you have no choice as to contact a technician for laptop.
    The point is that this issue sounds like a hardware problem serious, I think of the mother or the CPU issue because it was not possible to stop the unit by pressing the power button for 10 seconds

    The laptop was purchased in September 2008?
    Well, if you have saved the laptop on the Toshiba driver European page then the guarantee must be valid for 24 months. Which means that the guarantee must be still valid
    So you should not have to pay anything

    Welcome them

  • Equium P300-19O - black screen and does not restart

    My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
    I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

    Please suggest anything that could help me get the laptop again.

    Hello

    Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
    Maybe you can also try a system restore to a previous state.

    If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

  • Black screen, message - no hard disk found, hum. Can't seem to open the page, need to help trip.

    Laptop has a black screen. Power outtage yesterday while off. Message arrives hard drive not found. Sounds like the hamster on a wheel. Need recovery of info and override info.

    Hello

    Looks like you need support as there must be some serious problems. Check in the settings (BIOS/CMOS)
    as you start - usually F2 - to see if the disc is recognized and is 1st in the boot order.

    Not good news, I'm afraid,

    Good luck.

    Rob - bicycle - Mark Twain said it is good.

  • Equium A110 - 233 LCD screen all shades of blue

    The LCD screen very rarely works well. It is ALWAYS perfect and an external monitor.

    The screen is bright enough, so this is not the stuff of backlight. Looks like a test page for a defective printer - primarily cyan with a small window on the screen 'good', plus a load of dirty lines blue & black in places up and down the screen.

    One of them is the cursor when it is moved as I have messing around on the touchpad. I could take a camera phone picture if that helps anyone. This is a screen replacement or something else?

    I suspect that it fell (here again, who has not never let down their laptop?) as the cylindrical hinge on the RIGHT side is slightly damaged.

    The laptop itself works fine, was turned on for hours and hours without any problem, etc.

    See you soon

    SW

    Hello

    I think it would be a laptop display error because the image on the external monitor is fine.
    If the external monitor would be affected too then a graphics card could malfunction, but in your case, it shows more like a display problem.

    So in my view, the display needs to be replaced to get this problem resolved.

    Good bye

  • Equium A110-233: where to get the recovery disk

    Hello

    I just wanted to know where to find a system restore cd since I lost mines.
    I want to restart the whole system, but I lost the CD.

    Hello

    Here in the forum, you will find a large number of issues relating to the order of recovery CD.
    And it's always the same answer; You can order the recovery of the ASP disk in your country!

    Here you can find the point closest to ASP:
    http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

    Good bye

  • Satellite A210 - 11 p - gos black screen and HARD drive does not

    Hello

    My Satellite A210 - 11 p suddenly goes to a black screen and the hard drive stops working. It is always under tension and if I want to restart I have to unplug the unit and remove the battery.

    I thought it was overheating and checked the time and they were really high in the 1980s. I took the fan and cleaned (very dusty) and the basic form of thermal paste. Temperatures plummeted now immediately but I still have the same problem, I updated the graphics driver and watched the temp on GPU (which is fine) but the problem is still happening. I used a number of programs to check for errors on the hard drive and no reported problems. I reloaded Windows 7 but still no joy.
    The problem seems to occur at any time and is not due to the execution of a given program, even just browsing with firefox

    Not too sure what to do and any advice would be welcome.

    Hey Buddy,

    > I reloaded Windows 7 but still no joy.
    Have you ever tried with Toshiba Recovery disk operating system?

    The Toshiba recovery disc there is an image of the settings from the factory with all the drivers and tools. If you install Windows on this disk, you factory back.

    That would mean if you have the same problem after the installation of recovery it s really bad hardware working because you have pretested settings of Toshiba. In this case an authorized service provider can help you make an accurate diagnosis what part is affected.

  • Satellite P200D - black screen and does not just by running

    Hello everyone, I have a Toshiba Satellite P200D - 107 PSPBLE with configuration set-aside:

    Processor: Turion x 2 TL - 52 64-bit clocked at 1.6 Ghz
    Display: 17.3 inch
    Graphics card: Ati radeon x 1200
    RAM: 2 x 512 MB ram (1 GB total) which I upgraded to 1 x 2000 MB and 1 x 512 MB (for a total of 2.5 GB)
    OS: FACTORY CD WINDOWS VISTA HOME PREMIUM 32-BIT
    Power: Running on the direct power without the battery cable

    Although the pc is quite old sound fundamentally new barely there 1 year of normal use on it.

    PROBLEM:

    The screen goes black (no), even if the screen still has the backlight running, the laptop is still under tension, but its basically in a kind of deep hibernation with the fan running yet.
    The laptop screen turns off 5-10 minutes after windows loads, even if in idle, it also stops during installation of the operating system.
    I tried to run the music and the music stops when the screen goes black made all the hard disk activity which I believe indicates that it is not related to the video chip.

    TRIED SO FAR:

    1. open up the computer laptop and cleaned all dust processor, now CPU temp is 50 max, even for hard disk
    2. update the bios to the original to 1.70 - did not help
    3 connected external monitor also stops it the same time as the laptop screen indicating it is not not a screen issue
    4 reinstall OS several times
    5 tested memory with memtest64 - no error
    6. test the hard drive with hddregenerator - no error

    What I've noticed:

    If I leave just a 512 MB of ram in the laptop then the laptop stops not at all even in windows applications, tried to launch a game to remove video card and it works without problem for hours, but as soon as I add the stick of 2 GB or another origianal 512 stick it will go inside the black screen 5-10 min (or earlier) to get into windows.

    He never stops in dos mode (as in memtest, hddregen) even with 2.5 GB of ram.

    After that the screen goes black, if I stopped and then try to save, it it won't work at all, the screen stays black with the fan spinning and boot CD, I must absolutely disconect the power cord power and re - set before it starts again.

    Anyone has any ideas, I am experienced with the pc, but have never stumbled upon something so weird that I have just can't explain this problem that came straight from heaven.

    Toshiba to wake up, this forum is a total joke, you would think that you would be able to afford hiring a bunch of technicians to actually help people rather than rely on the users of the forum to do your work for your, you don't need to have a forum, if you don't have the staff to actually help people solve their problems.

  • Broken laptop screen Equium A110-233

    Hi, I have a satellite A110-233, the screen is broken.

    I have attached an external monitor and it displays when the Starter until he got to the Windows logon screen and then it switches back to the laptop screen.
    Is there no workaround known solution for this other than to replace the broken display?

    Hello!

    The interal screen replacement is a little tricky because you have to remove a lot of. You should remove a lot of parts and screws, and for that, you should have a little experience with it.
    An ASP can help you to do this and be able to order this part and exchange it or take you a look on ebay.

    Normally, you can switch between monitors with FN + F5.

    Good bye

  • Satellite A200-1CR - black screen and no boot

    Model:
    Toshiba Satellite A200-1CR

    Question:
    By pressing the power button to power on the computer for a full boot, the power LED lights up but still black screen (not even of lighting). The logo led 'Satellite' in the lower left corner of the chassis remains off while the HARD drive has made a unique quick snap; DVD activity led (the device) always remains on even without any CD inserted, by pressing the eject button do nothing (status bar is locked) and no sounds of activity.
    No logo screen of boot (show stays), not of beeps dark and wide, no DVD or HARD disk activity, keyboard seems does not (all combinations that should light up an led, capslock, numlock, etc, does nothing), the fan works.

    I have already (without success) tried:
    -Unlock the tray, insert the rescue CD and power on
    -Remove the main battery and power on with AC adapter only
    -Insert a bootable USB stick/external HARD drive

    The computer worked as expected the day before and there has not been any kind of shock. Described is the situation I faced when I turned on the next time (only 24 hours later).

    What could be wrong?
    Thank you.

    > By pressing the power button to power on the computer for a full boot, the power led turns on but screen stays black

    Well, looks like hardware problem; Maybe the memory problem or something serious with the mother or the CPU. It of really difficult to say what could cause this.
    You can try to check the RAM modules.
    Trying to start using a maybe only module, it is useful in the case otherwise I fear, you will need assistance from technicians Toshiba ASP m

  • Satellite Pro L450D black screen and will not respond to any keys

    Hello

    My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

    Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

    A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

    As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

    + Windows 7 +.
    + Recover Windows to Factory Settings [active EMS] +.

    So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

    I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

    I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

    Any help would be grateful.

    Hello

    Have you tried the option of HARD drive recovery?

    If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
    Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

    I hope it will work!

  • After logging on my Satellite Pro only black screen and the cursor are visible

    I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

    I do not prefer the product cause of my data recovery on this subject, any ideas?
    thnx

    Hello

    You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

    Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
    But wait; have you tried to connect the laptop to the external display?
    Check it!
    Maybe you could see something on the second screen.

    I think that this procedure could be useful to clarify what s wrong.
    To me this question looks like a small little dysfunction of the FL inverter.
    In this case the installation of the new operating system will help you not to solve this problem.

    But who knows the verification is necessary to find what could be wrong.

    Good luck and bye ;)

  • Start black screen and beeps, HELP pls

    I have a HP Pavilion zv5410. When I turn it on it has a black screen and it beeps (1-2-2). I went on some sites about, but don't really understand what is happening.

    I put the new RAM in because that I was told by a techie, it was usually the RAM goes bad, but this did not help. I can't do anything with the BIOS because I can not even a screen to enter in info, even with an external monitor.

    I was told that I could get the data on my hard drive with a hard drive enclosure kit. I bought the kit box Rocketfish 2.5 inches, but it has a different connector (for individual pins where solid mieare 'PIN' this slide down into the connector of the laptop).

    Any ideas or suggestions. I'd appreciate any help.

    Thank you all,

    K

    It worked!  I feel so stupid for not trying to see if the plastic piece came out.  Thank you much for the help!

    Karen

  • Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

    Victorinox original title: Black scree & blue screen...

    So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

    Hello

    · What is the error code or error message that you receive when the computer starts in safe mode?

    · Were there any changes made on the computer before the show?

    · What is the number and the model of the computer?

    · Who is the service pack installed?

    Try the methods below:

    Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

    Method 2:

    Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

    Method 3:

    You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

Maybe you are looking for

  • updates to the app - store iTunes temporarily unavailable

    Hello I've usually will update my apps in iTunes once a week, so there's about 30 updates at a time.  For a month or so it will start to update one or two and then I get the message that I couldn't buy "appname" and the iTunes store is temporarily un

  • Portege M700 rotation problems after the upgrade to Windows 7 64-bit

    I've upgraded to windows 7 yesterday evening on my portege m700. It is Windows 7 Pro 64 bit. I installed all the drivers in 64-bit on Toshiba page and the Windows section. Everything works perfectly except the screen does not properly rotate when in

  • overlap of XY graph with xscale property

    Hello I have a problem using the xscale maximum and minimum property... when I use the nodes property that it straddles two sets of curves in the same graph: one with the scale I put and the other as if I haven´t the value of the xscale assets... Wha

  • Communication I/O Stream socket operations

    Hello! I want to build a mechanism that opens a socket on a server connection and then independently send and receive messages to and from the server on this connection. My approach is like this: main thread I run a wire (ignition wire) which opens a

  • I'm new here and have a question.

    I have attached photos of my problem where I can't move any video or audio, and my cursor is transformed into something else. Please see if you can help. Thanks in advance.