Equium A110: Cannot use LAN after wake up from hibernation or standby

Similar Questions

• Satellite Pro A100 spontaneous wake up from hibernation or standby

  Hello world

  Since a few days my Satellite Pro A100 automatically wake up from hibernation mode
  (and last night mode ensures too)

  I don't have any in features (such as LAN or USB) wake up, as far as I know, that these features are not yet present in my current BIOS version (1.50).

  The wake-up generally occurs with peripheral No. or LAN cables connected.

  I used the hibernation mode without any problems for over two years on this laptop.
  So I think that it is a hardware problem, for example something related to the power button or the close button of cover.

  Is it possible to completely disable the close lid button? PowerSaver to disable for example l ' hibernation on the cover, but I don't seem to be able to turn OFF the alarm on the LID.

  Thanks in advance for any suggestions or comments

  seeah

  Hello!

  Well, in your case, I would try first to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If it doesn t work, please contact an authorized service provider. Technicians you can check laptop because then it looks like a LID switch problem.

  Good bye

• M70-160: don't wake up from hibernation or standby - hardware or software?

  I just maaaaaan!

  works fine, but will not wake up from hibernation or 5000mAh! unless you're going to wait a while! 15 min or something like that!
  After that he's going to wake up and work normally.

  I thought that it is overheating problem but now just turn it on and when the toshiba logo appear if you turn it off, it works again, but after 15 min it will BE!
  This isn't a problem of heating!

  She does this even without HD top!
  at first, it was the hibernation and standby problem, now it dose the same with stop!

  what I can do!

  I bought just the guys! ASP is now a way!
  is there anyway that I can do to fix this!
  I have difficulty PCs a lot, but not books!

  Hello

  You can also contact your local Distributor and check with him. They also have enough experience. On this path, it is not easy to tell exactly what is happening.

  Is the unit preloaded with recovery media or with your own operating system?

• no access to internet after waking up from hibernation?

  I have a laptop HP G42 - 23OUS windows 7 Home premium PC. I bought ebay last manufacturer, was refurbished. Also, I use wireless internet. I totally love it, but on the one hand - whenever the computer wakes up from hibernation mode it does not connect to the internet! I have to restart the computer before it will reconnect to the internet, which the ruins completely the whole mode of hibernation in a first time!
  To avoid this problem, I changed so that while that plugged power settings it will never go into hibernation mode & rather will just idle until I have press the key again. That said, it is no longer a huge problem, but I'd still like to know why this happened & what, if anything I could do to fix?
  Thanks for any info you can give me about this someone ' one/everyone!

  Hello:

  Here is the link to the latest driver for your Broadcom wireless card. (as of 02/13/12).

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102505-1&cc=us&DLC=en&LC=en

  If all goes well, the problem will be solved.

  Paul

• RALink RT3290 stops responding after waking up from hibernation, loss of connection

  RALink RT3290 802.11bgn Wi - Fi adapter (driver 5.0.37.0 25.11.2013) stops responding after waking up from hibernation, loss of connection. To recover, it must be restarted (toggle), what happens no wired connection, for example, obviously, drivers Ralink need good alarm clock a reset. Thank you in advance.

  Looks like that driver update solves the http://www.mediatek.com/en/downloads/ problem

• BSOD after wake up from sleep/hibernate development

  Hello
  I bought the new laptop, installed fresh windows but get lots of bsod.
  I have run the check disk (http://support.microsoft.com/kb/2641432?wa=wsignin1.0) and (http://windows.microsoft.com/en-us/windows7/diagnosing-memory-problems-on-your-computer) memory checking, everything is OK.
  All dump files are in this archive:

  https://SkyDrive.live.com/redir?RESID=F97BF575804A53F8! 107

  + 2 first file (061213-7082-01, 061413-7862-01): I go more than 15 minutes, my laptop goes to sleep, when I come back and turn it on, it shows bsod.
  + 3 following files: I checked my drivers with verifier.exe, after some tests, I find that driver bluetooth has error, it causes a bsod whenever my laptop restart (with verifier.exe). I removed this driver.
  + the last file (11481-061613-01): spent 5 minutes, she alo crashes after waking up from his sleep. The chrome is updated (Version 27.0.1453.110 m).
  More info: I install windows on the second disk (SSD).

  Hello

  I went through your minidump files and I see that you get and Stop error 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED and this could cause due to a timeout problem in the GPU. This causes a reset which let the GPU in an inconsistent state.

  I suggest you follow the methods provided for in the given article.

  Method 1: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow the steps in the link to return the computer to a Normal startupmode.

  Method 2: Update the video card drivers.

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: Refer to the section that says download and update a driver yourself.

  You can also install the patch that is available in the article.

  http://support.Microsoft.com/kb/983615

  For your reference: resolve stop (blue screen) errors in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: After you perform troubleshooting steps to clean boot, follow the steps in the link to start the computer to Normal startup mode.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I strongly recommend to back up all your important files and folders on an external storage device before performing any type of repair operating system or upgrade.

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Satellite P750 - resonding stops after waking up from hibernation

  If anyone can help, I recenty purchased a P750 Satellite equipped with an i7 processor it has 4 GB of RAM. I was experencing problems since buying it. It seems to just stop responding the round icon turns showing his thought but I can wait 10-15 minutes and there is no change. This problem occurs sporaticly and sometimes occurs when loading new programs. The problem happens almost all the time if he entered hybernation and when I wake with the mouse, it starts but when I have to connect to the net, for example, he will bring to the top of the page of internet explore and the round icon will be spinning and it will stay like that for centuries until what I am forced to close it with the start and stop button. When I have this problem I have tried using CTRL ALT DELETE to open the Task Manager but the Manager tasks will not respond.

  If anyone has had the same problem and is there a solution. Note When I turn the disk protection mode HARD the probem seems to happen less frequently but persists.

  Hi captain101,

  Wait a minute, please. Icon of what you mean exactly? I don't know what you're talking about, so a more detailed description of this icon would be useful.

  The more you use the version preinstalled Windows from Toshiba or your own installation?

• Satellite P200-144: Resolution changes after waking up from hibernation

  On my P200 Satelltie I put the graphic resolution of 1440 x 900,
  but on wakinging it from hibernation, it reduces the resolution.

  Also about removing an external display, it does the same thing.
  Annoying because I have to reset the resolution and rearrange icons desk top of the page every time.

  Any body know how to pass this auto reset cut, so that it remains with the setting of the resolution?

  I have too many P200, but everything works fine. You have operating system using recovery DVDs.
  By the way: what operating system do you use?

• G560 - network disconnected after waking up from hibernation

  During the last two days, my laptop Lenovo G560 (running Windows 7, 64-bit, BIOS 2.10) has had problems with its (wired) network card after waking from hibernation. It is shown as disconnected (even as if the cable was physically detached). The only big change I played in the last few days has been installed Service Pack 1. However, the problem only appeared about two days after, so I don't know if this is related at all.

  In this case, IPCONFIG shows the following for the NETWORK card:

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  If I try IPCONFIG/renew, I get

  Windows IP configuration

  No operations can be performed on the connection to the Local network, although it has its media disconnected.

  Hovering over the said tray icon "not connected". Troubleshooting of course can't find anything. Also, there is no weird in event viewer entries (unless they are hidden somewhere in other modes). Basically, the behavior is identical to when the network cable is physically disconnected (disconnected).

  In addition, disconnect the network cable, wait a few minutes and in him plugging back again once does nothing.

  For now, I have two workaround solutions:

  -system reboot

  -right click on the connection to the Local network (in network connections), select DISABLE from the menu, wait a few moments and then choosing the option ENABLE on the shortcut menu.

  Is there a better solution to this? Speculation on what might be the reason for this problem all of a sudden?

  Right click on my computer > manage > device management > network cards > select wireless adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

  Please post back with the results.

• Satellite A200 - cannot use Vista after the recovery of the product

  Hello. I hope someone can help me with the following... This week I had various issues with which follows my laptop a Vista update that system restore did not fix, so I decided to go for a full recovery of product (which I have a complete backup of all my files).

  So far I have used the product recovery on my laptop in the 3 ways I can see (and more than once): without changing the settings, change the settings and maximize the partition, change settings and select advance / expertise.

  Whenever I was able to complete the initialization of windows, create a new user account, etc. Once the Office has been set up, I get a small window with a progress bar and when it's over, I click on the button 'restart '...

  After the reboot, I get the black screen that says Microsoft Corporation with the green progress bar, but he's there for what feels like 'too long '. After a while, I get a black screen with a cursor, then a blue screen for a crash dump.

  If I use F8 and boot mode safe, the system stops the CplIR.sys file, although the hard disk activity seems to be continuing. I turn off after 10 minutes.

  If I use F8 and then select Repair computer... This is what is happening with each option
  -Restore the full windows operating system: after clicking on OK nothing happens.
  -Diagnostics of memory: there is no problem with memory
  -DOS prompt: I run CHKDSK and there is no problem with the hard drive
  -Restart: there is no errors, even if the word diagnosis 'impossible' when he sees, there is no system restore points

  Then on reboot I get the black screen with cursor followed by the crashdump OR if I managed to log in and access my desktop, I get the crash dump, as soon as I try to do something (like open Control Panel).

  Following the instructions found elsewhere, I have tried this after removing the battery, then changing power management options immediately after the initialization of windows (ie. before clicking on the restart button). No change.

  I even ignored the button restart! But still get a crash dump, when I try to do something.

  Any ideas? I've got past (ie. wasted) so a lot of time on this and don't understand what may be wrong after formatting the windows drive image and reloading...

  Hello

  It's very interesting story. I got several notebooks several times but I never noticed anything like that.
  I must say that what you did right and you think appropriately. If I were you I would try exactly the same steps to make it work somehow.
  I do not know which issues you had before, but I imagine that here it's just the problems of software and not important for the operation of the equipment.

  It's really hard to say what can be the problem. What you can try, is somewhere to get facilities Microsoft Vista disk and install naked Vista to see if the same thing will happen again.
  Anyway, the fact is that images of recovery are tested and adapted for each laptop model and if the material is OK there no reason for this kind of behavior.

  Try again with the new installation using Microsoft facilities drive and let us know exactly what is happening.

• Equium A110: Cannot upgrade Vista because of ConfigFree

  I own a Toshiba Satellite A110, Intel Core Duo 1.66 GHz... When microsoft published the Vista RC2, I downloaded it all tried to install... BUT it won't! WTF... ! It is said that it can not install because of the FREE CONFIG which is installed on my machine... you know, the one that manages your connection to internet without wire wireless... It is not compatible... He said that I should uninstall it.

  I can't do it because maybe I can't use a wireless connection anymore. Has anyone CONFIG FREE too who wants to upgrade to vista or who owns a successful installation without uninstalling the free config?

  YOU KNOW I WANT TO PERSONALLY ASK "TOSHIBA" ON THIS SUBJECT, BUT THEY DO NOT HAVE A LINK THAT WILL ALLOW YOU TO SEND BY E-MAIL. So far I'm trying out...

  First of all I did not any Toshiba utility tools and drivers specifically for Vista. It seems at this time are no update available! Why? Perhaps because it is not official on the market?

  Second, the Configfree is not necessary to use or to connect to the WLan.
  I use operating system simply configuration or Intel Proset utility.

  Finally why you n t create the second partition on the HARD disk, and then install the Vista operating system on that partition?
  Come on man...

  By the way: I will give you a valuable advice:
  Engage mind, before opening the mouth

• Cannot use CS6 after the expiry of the CC of the trial

  H, I I work on a desktop with Windows 8.1. For a distance learning course, I got a one InDesign a Photshop Cloud version installed for 4 weeks on my desk. On this, I have a version of Adobe Creative Suite CS6. Now, after the expiry of the OBA of cloud I tried to work with my office versions. This ist is more possible, because I always get a note that my cloud-Abo has expired. It is not possible to remove the cloud of my desktio ist program. How can I use my version of office again?

  Cloud of reading also includes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

• Cannot use airdrop after OS update to el capitan

  I've updated OS to el capitan, then I can't use airdrop to share files, and I have tried many ways to activate once again, but without success.

  Please advise.

  Is your Mac Pro at least a beginning model 2009 (model # A1289) with an AirPort Extreme card? You try to use AirDrop with a different Mac or an iOS (iPhone, iPad, or iPad Touch) device? If, on another Mac, which version of Mac OS X if it running?

• Satellite P100-286: cannot use Bluetooth after installing XP

  I have a portable P100-286 Satellite with bluetooth. It used to work OK but since I re-installed Windows XP SP2 I can't use bluetooth.
  There is nothing in the control panel and nothing in the hardware Manager that mentions the bluetooth.

  I installed al the latest drivers and BIOS updates and still nothing.

  Does anyone have any ideas why I don't see bluetooth?

  I think that you didn't install the driver BT properly and didn t activate BT

  First download the pile of BT since this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  BT installation restart the laptop and turn it on by using the FN + F8 key combination!

  Hope that this will enable BT again

• Cannot use CS6 after the expiry of the subscription of the CC

  CS6 got on my computer for more than 4 years, I bought at the time. I used a free CC subscription through my University for the past year. Now that it has expired, I can't open my CS6 programs more. When I click the InDesign icon, for example, it tries to open, open CC icon then they disappear. I was chatting in line for more than an hour and got no where, except that my serial key is active and available for use. Should I uninstall and reinstall CS6 again?

  Run the cleanup tool

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems