Equium A200-1V0 - need help with the installation of the recovery system

Similar Questions

• Equium A200-1V0 - need advice for the new series of laptop

  I want to replace my Equium A200-1V0.
  I don't know not in range it originally was - base or more?

  What would be a good replacement for it now?
  What I use my current for internet, email, Word/Excel and simple games. I also use it to listen to the music and the iplayer.
  HD, also used to store photos and iTunes.

  I have a budget of about £300-£400
  Minimum specification of:
  Memory - 2 GB
  HD - 200 GB
  Intel processor - NOT a Celeron - duo or preference i3
  stereo speakers
  at least 2 USB ports
  HDMI port - optional
  Screen 15 ''

  Thanks in advance...

  Hey,.

  There are several laptops Toshiba with 15 screen I think that the important point is the price because other requirements such as 2 GB RAM, 200 GB, etc are no problem. Most laptop have 4GB or more of RAM and also tough with more disk space.
  Moreover the Intel Core i3 processor is standard CPU at the moment, some models have a Core i5

  Take a look at Satellite C650, L650 and L750. These models are to fundamental factors such as Internet, music, videos and simple games.

  You can compare all models on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/family/

• Qosmio X 70-A - need help with the recovery image installation

  OK, so I recently bought a new laptop (Qosmio X 70 - A) which came with pre-installed Windows 8.1.
  First thing I did was to make a backup of the system, all good and beautiful image... installed a program for a better partition the HARD drive and the program dirty windows. It would not start (a blue screen appeared with the error 0 x 80070035).

  Searched the web for solutions and managed to repair using a recovery media, but the laptop was moving to slow down, the best thing that I thought was a restore with the system that I've done before image.

  I put the image on a blu - ray player and entered the recovery media, troubleshooting, advanced option, image system restore, choose the blu - ray and he went for one minute after this error appeared 0x8078002c and my HD is completely erased...

  Please help me
  Laptop did not come with any dvd/cd etc.
  I don't know the serial number of Windows (there is no sticker on the laptop with the sticker).

  Generally the recovery image installation should not be problematic.
  A few months ago I ve installed Win8 recovery image on friends laptop U940.
  If I m remembering well, I just choose recovery image installation (out-of-box) and the recovery image has been successfully installed.

  There was no some don't troubleshoot option.
  Start your laptop and press F12 to get into the boot menu. Put recovery media in the optical disc drive, choose the CD/DVD/BD drive in the menu and press ENTER.

  Just follow the on-screen menu and choose recovery image installation (State out-of-box).

• I need help with the wireless system. One of my computers doesn't seem to get signal

  Hello, I installed Belkin F5D8235-4 router and im get the signal on one of my computers. On the other computer, it seems that im getting the signal, but it says unidentified network. When I try to open the internet it says is Interenet Explorer cannot display Web page. Do you think this could have to do with the card in my computer is not not compatible. I have an Atheros AR5007 802. 11 b / g WiFi adapt. IM thinking that if I buy a D-Link wireless G USB adapter, USB wireless adapter Compact of Linksys or a Belkin 54 G Wireless USB Adapter my computer may be able to get the signal. What can I do? Help please

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path? With the help of WPA/WPA2 security? You put on the G and N or N
  only? A to G for this adapter connect the send.

  Your Atheros should be consistent - could be drivers.

  Actually try updating your driver and disabling the network logon. (To do this, use a wired connection or)
  Download drivers on another machine and transfer on removable media).

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Need help with the recovery of the System Satellite L300-149

  Hello

  We have a Satellite L300-149.
  Was running really slowly then wanted to reset it to factory settings.

  Doesn't the "press F12 during startup, insert the disk in" etc etc BUT have a horrible feeling that I put a disc to which belonged in fact to a different Toshiba, we used to use a U300.
  'Give' was that the manual for the U300 is now on the desktop on the Satellite :-/

  I hope that this would not be a major problem BUT the F8 key is gone now it's impossible to connect to the internet.

  I looked online and read that the L300 sometimes doesn't come with a disc that the info is kept on a separate part of the disk hard hope so I could reset it back to settings to factory again but when I click on F2 on start up and go to the option to restore it, noting happens.

  Can someone please help?

  Hello

  Forget HARD drive recovery now
  You have recovered the system using another disc and it has been removed and the HARD recovery disk image files. If this option is NOT possible!

  You reason that the L300 and all other laptop does not come with recovery discs.
  The recovery disk must be created using the recovery disk Creator called preinstalled software. But it is also NOT possible because you deleted the preinstalled system and the files that are needed for this recovery disk are no longer available!

  But if everything is working properly except the WLan FN + F8 key, then I recommend you only install the Wlan driver. I think that the key does not work because the right WLan driver is not installed.

  I think that the Satellite L300-149 supports the smart WiFi Realtek RTL8187B.
  Then install the right driver Wlan you can find here:
  http://APS.toshiba-tro.de/WLAN/?page=downloads

• Need help with the recovery partition/create recovery media

  HI - first thing I did when I got my thinkpad is a clean install of w7, but then I thought about it and restored the recovery partition, conviniently located at the end of the training, in order to create a backup dvd factory. Thing is, when I click the autorun (lenovoqdrive.exe) and select 'create recovery media', I get an error stating that "program files (x 86) \lenovo\factory recovery\recovburncd.exe" is missing... obviously since the operating system partition was crushed.

  I tried RnR and looked on the software + drivers page and nothing happens as "... \lenovo\factory recovery\" when it is installed. So, where can I download the program that creates the recovery discs?

  (I know possible to restore the operating system of the *.wim file but I want to leave that as a last resort).

  Okay here's what I did to who mightve had the same question: as mentioned earlier, I have restored the partition Q with (your favorite free partition recovery tool), then booted from a usb winpe (with imagex) generated from victory aik (free).

  first I deleted (from winpe boot usb) windoze partition with diskpart and recreated the 2 partitions S & C (and Q is on the left) by hand according to 'recovery.ini' found on q. then I restored S and C 'sdrivebackup.wim' and 'cdrivebackup.wim', respectively, using imagex.exe, which is actually two one liners.

  Finally, I tried the bcd to fixation by hand according to "bcdinfo.txt", also found on Q, but that did not really work... so I just jumped into a bootable win7 USB and he rewrote the bcd by itself (I assume). the last step has been fixing the mbr by using /fixmbr and /fixboot bootrec.exe.

  ATM I started just and afaict it behaves exactly like the first start-up of the plant. see you soon

• Newbie needs help with the new system specs!

  I need to upgrade my system to my work because of the need to begin to use Camtasia and Premiere Pro CS6 (as well as other elements CS6).  I'm not a computer expert and the machine below will be set up for me next week.  I have a few questions that I had grealtly appreciate any feedback on:

  1. Do you think that in general my new system specifications are not enough for basic audio/video editing of SD and HD material?
  2. Can I expect a significant increase in the quality of video playback, as well as a reduction in the time of video rendering while you use Camtasia and Premiere Pro?
  3. Is my diet is going to be enough for the specifications below and if not what is the danger of not leveling who?
  4. If there is some thing/nothing else I had to upgrade what would it be?

  I work for a retail tile distrubtor with about 130 employees.  Training videos, that I create are mostly screenshot simple and basic videos that do not require a TON of high-end editing.  I use a lot of images JPEG high resolution and basic SD video sequences captured from a camcorder Canon GL2 (Mini DV cassettes).  Us will modernize ends up the camera, but that's what I use now.

  The previous computer I had suffered with very choppy video playback and long video rendering times and so I convinced my boss and IT Manager needs an improved system that has a faster processor, a better video card and more RAM.  I used my old system this year and the other takes place next week, is listed below.

  Thanks a TON for anyone who feels inclined to provide information!

  Andrew

  New system:

  HP Compaq Elite 8300

  • Win 7 64 - bit operating system
  • CPU i7-3770
    • 3.4 GHz
    • 8 MB Cache
    • 4 cores
  • Quadro 2000 D (62 watt max current absorbed) graphic card
  • 12 GB of RAM (4 GB statndard, added two other cards of 4 GB)
  • 1 TB SATA hard drive 7200 RPM
  • Intel Q77 Express Chipset
  • 320 watts power (stock)

  Old system:

  HP Compaq 4000 Pro (small size)

  • Win 7 64 - bit operating system
  • Processor Pentium Dual Core E6600
    • 3.06 GHz
    • ? MB Cache
    • 2 carrots
  • NVIDIA NVS 300 Graphics Card
  • 8 GB of RAM (4 GB statndard, added a card of 4 GB more)
  • 457 GB hard drive
  • ? Chipset

  Added CPU, system, a couple of USB devices fans cooler fans, etc.

  I did the calculation with an i7-3770 stock, 3 sticks of RAM, a graphics Quadro 2000, 2 USB, 2 x 120 mm, SATA 2 x 7200 RPM drives fans devices, 1 DVD burner, 30% capacitor aging and a 100% load system and come to this:

  

  There is no room for manoeuvre for any expansion at all. Not even add more USB devices.

• Need help with the time system

  I am trying to determine the time current system. It would be checked to determine if it is spent some time. (that is, the current time is after 15:00?) If so, the user would be prompted with a message saying if.) The system time would be verified only during a reset of the form.

  var now = new Date();

  The variable "now" be held next time current system.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address