Equium A200-1VO - "a disk read error has occurred."

Similar Questions

• Satellite Pro 4600: disk-read error occurs - press Ctrl Alt Del to restart

  I have a Pro 4600 which displays the error message "a disk read error has occurred. Press Ctrl Alt Del to restart "as soon as TOSHIBA logo goes.

  The laptop was given to me because the person who had tried to move to XP Pro and don't could not make it work, error with the CD Rom drive and she deleated the old OS (Win2000) off the coast.

  I took the hard drive and did a fresh install of XP by attaching the drive to another computer. The hard disk starts well on the other computer, but I get the error message on the Pro 4600.
  Any ideas. I know that I need to replace the CD Rom, but if I can't make it work, I don't want to drop money in it for a new CD Rom

  Thank you, Bob

  Hello

  Are you sure that the CD drive is dead?
  I have goggled a bit on the net and found some practical information that there may be some HDD malfunction.
  Some guys advised to use the command CHKDSK C: /R to solve this problem.

  But if it's a cd player error, it should be possible to disable the drive in Device Manager.

• 0xc00000e9 then a disk read error occurred. Press CTRL ALT DEL to restart

  desktop computer is Compaq windows update.  on restart received status 0xc00000e9 32\ntkrnlpa.exe leader: \windows\ system information: windows failed to load because the kernel is missing or corrupted.  Installed recovery disk, now have "a disk read error has occurred. Press CTRL ALT DEL to restart".stuck cycle.    suggestions?

  shonkg,

  HD can be at fault... do a chkdsk and make sure that your player or files are not damaged.

  http://www.w7forums.com/use-chkdsk-check-disk-t448.html

• A startup problem after that Windows updates were installed and a disk read error occurred.

  I have a laptop Dell Inspiron 9400

  Windows Vista Home Premium SP2 operating systems

  Last night, he showed 16 updates are ready to be installed the automatic updates.

  So I clicked to install the updates as I always do.  I have everything done exactly the same thing.  When updates

  have been made install prompted me to restart now for the updates to take effect.  I have clickedd the button

  Restart now and he acted like he was going to reboot except is went to a blue screen with a message that says:

  A disk read error has occurred.

  Press Ctrl + Alt + Delete to restart

  I tried several times by pushing the Ctrl + alt + del keys to restart my system, it does not start...

  It shows the DELL screen with the loading bar, which is in charge of the left to the right.  It then displays

  Back to the blue screen with the same Message (an office read error)...

  I tried once or twice as the system restart in Mode safe mode (F8)...   This doesn't work anymore...

  He always flashes back to the BLUE SCREEN with the same message.

  Please, can someone tell me why this would happen as a result of the windows updates...?

  How this can be fixed or what should I do to get my back operational system?

  Thank you...

  Shelly928

  Hi Shelly928,

  You can read the following article and try the steps to solve the problem:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Hope this information is useful.

• Disk-Read Error - what is wrong with my computer?

  Hello

  I have a HP Pavilion a1730n and this screen when I try to turn on the computer. It cannot start. Suggestions?

  "A disk read error has occurred. Press ctrl alt del to restart. "

  

  ----

  See post of other attempts (no success) (http://h30434.www3.hp.com/t5/Desktop-Operating-systems-and/Recovery-MAnager-Not-Working-Stops-midway... )

  Reading efforts and errors you received on your other thread it seems pretty obvious that your hard drive is bad. It could be as serious as a bad on the motherboard controller, but usually, it's only the hard drive.

  A hard drive can be replaced for about $40 and takes about 15 minutes to change. EX HERE

• Can not burn blank CD on Equium A200-1VO - unknown error occurred (2131)

  Hi all

  I have never been able to burn a blank CD using the rewritable CD drive on my Equium A200 1VO.
  I am using TDK CD - R80 700 MB ', 'up to 52 x speed"blank CD

  This is the error I get when I try to burn a disc in iTunes:
  The attempt to burn a disc failed. An unknown error occurred (2131).

  Any suggestions?

  Mike.

  Hello

  AFAIK this peacekeepers of error message by using the CD - R disc.
  Check if you can burn the CD - RW? On my laptop I can burn files on CD - RW iTunes correctly.

  By the way:
  If your laptop has the reader of the TS-L632 CD/DVD then you need to update the firmware as suggested here in this article from Toshiba

  [Unable to burn songs on iTunes to some CD media. An unknown error occurred (2131)"is displayed. http://askiris.Toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=2024 958xml & sliceId = & dialogid = 56438599 & stateId = 0% 200% 20 54771650]

  Concerning

• Equium A200-1VO - what could be done to improve the situation of power supply?

  I recently bought an Equium A200 1VO as one second laptop - my other (an Aspire) is excellent, but a bit heavy in the basket to autour. Anyway, it seemed fabulous value and has worked very well so far - but I just discovered a catch today, the low battery life. I understand that this gap is shared with most of the other laptops of a comparable weight.

  In any case, I wonder what could possibly be done about (I often use my laptop while on the move, in locations without power outlet available, and less than 1 hour of power is very restrictive (I know powersave and others)-especially compared to my other laptop which is about 3 hours on battery)?

  Is there a portable power charger (the type with which you can load to the top of their rechargeable batteries on the sector, then take them and be able to charge mobile phones, iPods, etc. several times without needing an external power supply), as the Proporta one, who could charge a laptop as well (well, this laptop)? And how about the 9 cell Li-ion battery that sell Toshiba (or for that matter, one 6 cells)?

  How long will pretty much those give me? Are there other types of batteries that can be purchased for an extra life?

  Any suggestions on how I could get more autonomy would be most appreciated.

  Hi guys

  > what could be done to improve the situation of power supply
  You could buy a stronger battery which delivers more power for a long time
  You should take a look at the value of mA; more better ;)

  Also please don t forget that the Vista operating system needs more power as an early OS like XP.
  Vista needs more power because it wastes more computing resources.
  I read that a same notebook would run 2 times longer on battery with preinstalled W2K or XP.

• Equium A200-1VO - lost internet WIFI connection

  Hello

  Just joined to help my wife - she has a Toshiba Equium A200-1VO and lost WIFI connection internet.
  This is the laptop that I am sending this through my laptop.

  Tried to find our home network but the laptop shows not all internet connections at all.

  A screen said that the Internet had been extinguished-

  can someone help please turn it back on?

  If the WLAN switch is available please set it in position ONE. After doing this using FN + F8 key combination to activate the wireless network card.

  It work?
  WLAN is ON?

• Satellite L305D-S593 - disk read error

  My Toshiba Satellite L305D-S593 suddenly stopped. At first I thought he had a little more heated or something, but when I tried to turn back on it gave me a message saying disk-read error press ctrl alt del to restart. I did several times in the same direction. While I tried to reinstall windows, I got lucky if she showed to the installation screen once it did, I followed the instructions for installation clean (I had to do it once before, but for different reasons).

  Once he brought me to the menu had to select a partition to install on I said to do it on the main HDD after some loading and that time, he said that it was impossible to complete the formatting required. So I Redid the process and I noticed the music said it had 288 GB of available memory, but before that, I had only about 40. To remedy this, I clicked on the format button and it says that it cannot complete the action because the disk is about to fail.

  PS My processor is 64-bit AMD Turion dual core mobile, with 4 GB of RAM

  Hey,.

  In my opinion, it has something to do with the HARD drive itself, I guess that it s a bad sector so Windows Setup can format t HARD drive properly. I mean before you tried to reinstall Windows, the system could not start due to a disc read error. This means that the files on the HARD disk are confused because of bad sectors

  You can install Windows Toshiba Recovery disk?

  If it doesn t work too, I'll try to replace the HARD drive. Usually, it is not complicated and can be done in 5 minutes.
  In addition, you can check the HARD disk for errors with diagnostic tools special as Drive Fitness Test. Google a bit for such tools, they are freeware, so it s no problem to find. ;)

• Equium A200-1VO isue - white screen start new

  I got a new laptop Equium A200-1VO Friday as a Christmas present very very end and last night (Monday), I played football coach, play with ITunes and deleting files on an old mp3 player. Everything was fine when all of a sudden there was this click / the sound muffled and the screen went black.

  The laptop is connected to the time and so connected them to clear a/c was, so was the power and charge light, but he just stayed empty.

  I then unplugged the charger and it appeared with the orange light mean low battery. I then removed the computer game disc thinking that it is possible that and turned off the phone manually. Now if I just push the power button it stands theres a click, just about where is the hard drive and it stops, if I hold it in theres a click, but it stays on, all the time the screen remains blank.

  I then turned off and it rebooted I was wondering if it was just low on battery and still nothing.
  I left the place cell phone off during the night but in the morning, the problems are still there. I even blocked the "product recovery" disk, but still no sign of life.

  I'll try to plug this moniter screen and see if this is the problem then he hopes to be able to tell you soon. Oh, one thing I can think is that I used it on my bed, is there a way it could have overheated? If Yes, then would not be leaving off all night helped / solved this problem?

  Thanks in advance!

  Have you tried to remove the battery and disconnect the AC for a while?
  I would recommend doing this!

  Remove the battery and the power adapter for about 20-30 min. After this short period of time to connect all the parts again and try to start Notepad.

  Maybe it helps

• Equium A200-1VO does not start and makes weird noises

  My Toshiba Equium A200-1VO don't load on Windows entirely, which means I can't use it. When you turn everything goes well until the Welcome screen in Windows Vista. From there, it starts to get weird creaking and it beeps from time to time. It won't start here and these sounds do not stop.

  Help please

  Hello

  Is it possible to know where the noise comes from?
  As suggested by above user, it could be a HARD disk, but in this case, it would mean that HARD drive failures and he could die in the next time

  You said it s begin properly until appears the window Vista would be
  So maybe it s only a problem of software but I m still don t know what part of the software would create such sound however, I think that if would not be bad to reinstall the operating system in order to check the notebook with factory settings.

  If this strange question would persist or if you would not be able to reinstall the operating system using the recovery disc then a hardware problem could cause this strange things and I think it means that you will need to contact the ASP in your country for a material test

• multimedia card reader an error has occurred please drive reconnect to try again

  I have windows xp 32 bits SP3. I tried to copy the computer on a CD - RW disc images and a message kept popping up on the office.

  Multimedia card reader. An error has occurred please reconnect reader to try again. I got my coppied photos on the disk, but did not know what that message was talking about. It kept popping up.

  Hi Connie,

  1 is this problem limited only when you copy images from the computer to CD?

  2. What is the full/exact error message?

  3. have you connected any external to the computer card reader recently?

  4. What is the brand and model of the computer?

  It seems that the installation of the driver of the multimedia card reader is not over. If you have connected to any card reader recently, you can re - connect to the computer and allow the computer to detect the device.

  Hope this information helps. Provide more information so that we can help you.

• What happens when you get this message a disk read error occurred press CTRL, alt, delete

  I have a blue screen, which has this message "read a disk error occurred press control, alt, delete to restart, and when I do go to the first page of windows then return to the error.

  This should help you: http://www.tomshardware.com/forum/250364-32-solution-disk-read-error-occurred

• Computer does not load Windows. (Missing\corrupt file and the disk read error)

  I woke up this morning and my computer screen said:

  "Read a disk error has occurred."
  Press Ctrl + Alt + Delete to restart»

  So I did, and he just keeps it again and again. I turned off my PC, disconnected from the power and took out the battery. EXPECTED, put everything back in and turned on the computer. This time he made a lot of strange beeping noises and took forever and then I got this error:

  "Windows was not start because the following file is missing or damaged:
  \SYSTEM32\NTOSKRNL.exe
  Please reinstall a copy of the above file.

  I pressed on enter and it gave me the error reading disc again.

  Yesterday I updated my BIOS. So I also tried to go to my BIOS screen and "Load factory default settings", but I always get errors that I said just above and windows does not load.

  Help =)

  Hello I would wait until you try to do the repair first

  Make sure that the hd is just a notebook size hd
  Make sure that the speed is the same thing that you already size is really for you
  before you start to have a complete set of installation discs for the mfgr
  If you only use the os disk you will not load the microsoft embedded key encode any additional programs the mfgr installed or modified specially for your computer model and the party in the form of hard disk, you will need to do it yourself the format should be identical to the new factory
  uninstall all the equipment installed after you bought the computer (you must add once installation is complete)

• Error: "CHKDSK cannot continue in read-only mode" and "an unspecified error has occurred (766f6c756d652e63 3f1).

  I'm trying to run a CHKDSK on my hard drives. Whenever I try to do "chkdsk C:" or any other volumes (internal or external) invites of high command. I had

  "This type of file system is NTFS.

  Errors found. CHKDSK cannot continue in read-only mode. »
  (That's all I get, nothing in between)

  I have three internal volumes C: D; and E:. Running chkdsk on a volume any returns "CHKDSK cannot continue in read-only mode. Run with / f on C: will check the disk (no error) is restarted. Run/f on any other volume, I had "an unspecified error has occurred (766f6c756d652e63 3f1).
  Has received the same error in recovery mode, safe mode, using the account administrator or UAC disabled.
  Also got same error when you try to chkdsk on all external hard drives.
  I have formatted my E: and ran chkdsk on an empty volume, got the same error.

  Defrag works OK without any problems. External hard disks can be verified (no error and the bad sector) to another computer (win7 pro x 64).
  My external hard drives can be ejected without any problem. But ejection always fail after running "chkdsk /f.

  This computer is win7 pro x 86.
  Installed software: VMWare workstation 7, Microsoft Security Essentials, Visual c# 2010 express, Office 2003, Daemon Tools. DropBox

  Please help me to solve the puzzle.

  Thank you
  Hello

  After some debugging, I found that the ifsutil.dll reported an exception 'divided by zero.
  Finally I found that there is a fix from Microsoft for my netbook CPU (AMD C60).
  A Chkdsk command fails with an error not specified on a Windows Server 2008 R2 or Windows 7-based computer that uses a low frequency CPU AMD
  http://support.Microsoft.com/kb/2502789
  This fix solved my problem.