Equium A200 - CD/DVD drivers corrupt - Code 39

Similar Questions

• Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

  My laptop seems to have decided to stop reading data disks.
  However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
  I searched internet day for solutions and tried without success to the following:

  Removed the UpperFilters and LowerFilters in the registry.
  Uninstalled and reinstalled drivers.
  Bought DriverWhiz (waste of money!)
  Tried to access disc command prompt that generated the message "incorrect function".
  Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
  Uninstall service packs
  I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
  I uninstalled real player

  I'm about 3 minutes to destroy my laptop so any help would be appreciated.

  Laptop: Equium A200 - 1V0
  Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
  OS: Windows Vista

  Hello

  Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

  How about windows boot CD or a linux live CD?
  Is this possible?

  If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

  In this case, only a replacement CD/DVD drive can help greet

• Equium A200 - 1V0 DVD Player error impossible of video output to an external device

  Hello
  I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

  "Unable to video output to an external device. Please spend your
  display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

  I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
  The software used to work properly, and I have not changed the settings at all.

  I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

  Any thoughts would be accepted with gratitude.

  Bufster

  Hello

  I found a boyfriend of the solution.
  How?

  I searched simply here in the forum and found this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

  Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

  Update the audio driver and you must solve this problem!

• Equium A200 - CD/DVD drive is not detected

  I can't open any CD/DVD disc. The drive is not detected.
  When checked in the management system, he demonstrated, the drivers are missing or corrupted.

  How do I download the drivers? Or is there another solution?
  My model number is PSAF5E
  Serial number is YT144538Q
  And the CD/DVD device is POLE * DVD / RAM UJ-850 s ATA device

  Hello!

  T, you can download or reinstall the CD/DVD driver because it s a part of the OS (operating system).

  It would be interesting if the BIOS can detect the drive. Please check this box.

  It would also be interesting if you have an error as the #19 error message. This is known and a search around the forum.

  Good bye

• Equium A200-CD/DVD-RW does not

  Hi all

  I've had this problem for a few months now and have read a number of similar problems on other forums, but I thought that I had just state my case to see if there were other possible solutions before you give in and buy an external.

  MY laptop is a Satellite A200 - 26 d PSAE5. After several months of working perfectly my DVDRW drive - a pioneer K17A - ATA DVDRW - unresponsive. When all-optical meida is put in the drive, it will attempt to read - you can distinctly hear the disc turns, but it is audibly different sleek over-Rev noise it makes when it was working properly. It is very stop / start, and the player has often been a dull sound when it tries to read. The best way I can describe it is like trying to rev an engine; Looks like the drive is not to achieve the speed appropriate to read, if it makes no sense.

  The drive won't recognize commercial DVD, blank DVDs or old burned DVDs. It also will not recognize blank CDs or self burnt - although oddly, I sometimes get to play commercial CD - but only after a very long time and a lot of the deaf stop / start drive-spinning and noises. When I try to open the DVD player via the Control Panel, it is obviously trying to read, but finally the drawer just opens and the dialog box 'Please insert a disc into drive F:' appears.

  The Device Manager lists the CD as a xair NGL6RKXM SCSI CdRom device.

  I've updated the BIOS, I seem to have the latest firmware and all drivers are up to date. I also tried to remove the filters from the registry under the direction of microsoft support: However, when I tried that I discovered that my register lists only the UpperFilters - the LowerFilters is not there at all. Should I go ahead and remove the UpperFilter in any way, or it will cause more problems that it is likely to solve?

  [Edit to add] Under Vista Home Premium, incidentally.

  Any suggestions gratefully received.

  Thank you!

  Post edited by: marmotgirl

  Hello

  Very strange but it seems that your CD/DVD drive is faulty and must be replaced. You did a lot of things like the update of the BIOS, remove upper and lower filters and therefore the only one that I think that the reader.

  You must replace it with another that is listed in the user manual. Another scratch disk could not work, but if you choose one in the manual it will work because it has the same pinout, etc..

  Good luck and if you have any other questions please let us know.

  Welcome them

• Equium A200 1v0 - DVD Volume very low

  Hello!

  I noticed DVD playback volume is very low (even when the cursor of the volume on the drive and windows is max had). MP3 playback is very good and volume is much stronger, he just seems to be a problem with playback of the DVD. I tried a Toshiba DVD player software and Windows media player, but they give the same result.

  Someone at - it suggestions?

  Thank you.

  Audio controller: Realtek
  OS: Windows Vista editions Home Premium

  Hello

  I presume that you have played the MP3 from the HARD disc and movies from a CD/DVD player

  In the control panel - settings, you will find different audio audio controllers
  You must choose the reading and put all the controllers of possible sounds at a higher level.

  Best regards

• Equium A200 CD/DVD player - 26 d keeps opening by itself

  Starting from my laptop, the dvd player automatically opens and it again whenever I close. Someone else met this, or know how I can stop this?

  Hmm. I m not very good but looks a bit like a hardware problem.
  In my case, the CD/DVD drive is ejected until a procedure of engraving was finished. This is normal behavior

  But in your case the CD/DVD drive does not eject automatically...

• Should I in fact this recovery DVD - Equium A200-15I

  Hello

  I have a laptop Equium A200-15I series. For reasons too long to describe here, I don't have the DVD of master restoration - it was not provided with the product and after that a long period, I was told that I would have to pay for it. Not fair, but there you go!

  My request is that the hidden partition on the laptop is still there and what I want to know is that can still recover my windows Vista environment by hitting the F8 key at startup upwards and crosses the screen of recovery without the DVD Master procedure or do I absolutely this disc.

  I am aware that all media that comes with the DVD won't be available, but this isn't a problem.

  I hope someone can help

  Best regards

  Hello Seamus

  To be honest, I'm a little confused, and at first, I just want to clarify something. Notebooks (A200 series) are supplied with recovery DVDs and these books have no recovery image on the HARD disk and you cannot install the OS by using advanced startup options (F8).

  New laptops like A300 models are supplied without recovery media and recovery image is saved on the HARD drive and there is a possibility to install the OS without recovery DVDs. The recovery image is saved on the second partition in HDD Recovery folder. Drive HARD recovery can be done if this folder is not removed.

  If you want to have the factory settings again you need recovery (DVD) image. You can also purchase Microsoft Vista DVD facilities and install your own operating system. All the drivers, tools and utilities that you can find on Toshiba supports the page. Of course some other software like Norton or WinDVD player are not downloadable.

• The CD-ROM/DVD-ROM driver cannot be loaded by Windows and can be corrupted (Code 39).

  My DVD/CD driver drive HL-DT-ST DVDRAM GSA-T20N ATA Device cannot be loaded by Windows and can be corrupted (Code 39). How can I get the original device installed new driver if the CD/DVD drive does not work? It is available for download? Should it be first uninstalled and re - installed? A relative novice can handle?

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Update the driver for the CD/DVD drive and check if that helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Run the fixit for the following Microsoft Fixit and if it helps.

  Your CD or DVD drive cannot read or write media:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 3:

  Uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  Hope the information is useful.

• Equium A200 - problems with the CD/DVD-RW and Realtek HD driver

  I'm having some trouble with my Equium A200-1VO.

  First of all, I can't get the CD/DVD-RW to write any dics. The Player opens also from time to time.

  Secondl, I just downloaded and installed the latest driver Realtek HD audio, under the guidance of Toshiba, to see that when I plug my headphones the sound always comes out of my laptop speakers.

  Any help or thoughts?

  Thank you

  Now, he can be really problematic. If you use your own installation of the OS, no one can say with certainty what can be the problem. Each laptop manufacturer, including Toshiba, offer recovery image installation and in using the factory settings, everything should work well. These recovery images are tested and they offer all the hardware and software features.

  Maybe you should install Vista using recovery media supplied and check if all these problems are happening again. If yes then we can talk about the unusual and serious issues.

• Equium A200 15I audio don't deliver - C00D11E5 - no speakers error code

  Hello

  the speakers of my Equium A200-15I went suddenly silent. They speak too low. It is not cut and the control managers say that it works correctly.
  It works with some other external stakeholders. but my speakers before you say anything. the error code I got is C00D11E5 with media player.

  Help please

  This error is not known to me and it seems that there is not a lot of people with questions of the error
  First of all, you should try to remove you sound driver should and then reinstall again.

  On the Toshiba page, you will find the compatible driver.

  The question remains then you should recover the laptop with the Toshiba Recovery CD. Usually, if your notebook malfunction s material doesn t then a recovery CD should solve this problem. Otherwise, the hardware may be faulty and the laptop everything should be checked.

  Best regards

• Cannot play DVDs on my Equium A200

  When I try to play a DVD on Equium A200, it plays on windows media player. I have sound but visual is blurred.

  You need to install codecs. The best solution is to install the package such as K-lite codec.
  But there is another solution: you can use another player to watch movies on DVD or movies to avi, mpeg or wmv format. Use VLC Player. VLC player is also useful if you want to use subtitles in the txt file. Simply place a txt file with the same name in the movie file in the same folder. If you

  Check it out.

• Re: How to save the video file to a DVD-R for Equium A200

  I have the Equium A200. Someone can tell me how to save the video file to a DVD-R on my computer in order to use it later, or use it in windows movie maker and must not simply copy on another DVD-R right?

  My cursor also has disappered in the suite of windows media, that makes life quite difficult.

  Any ideas?

  Thank you.

  You mean, you want to copy the original DVD movie to HARD drive?
  Well, you can copy the contents of the entire DVD to the HARD drive. It means that you have to copy a lot of data.
  I would recommend shrinking the DVD movies using a tool called DVD shrink.
  It would decrease the data and would also copy the content to the HARD drive.

  But if you want to use these files later in windows movie maker, so you must convert these using a 3rd party tool.
  Google a bit and you should find many free applications that would help you to do this work.

  Good bye

• Equium A200-1V0 - cannot copy video clips on DVD

  I am trying to download my dvd movie clips, I tried the DVD-R and DVD + RW discs and at the same time I get the message please insert a writable disc. I contacted Sony to ask why I am unable to copy clips (I have a sony HD camcorder) but they said I need to 'make sure that you put a recordable disc. This will depend on your computer disc drive if it is compatible with DVD-RW/RW. Please refer to the specification of your computer for more information. »

  I have a Toshiba EQuium A200-1V0, nobody knows what kind of disks would let me copy on them?

  I previously copied pictures on CD - R and had no problems with these.

  Hi sjdscotland,

  I m a bit confused what program you use to burn the DVD?
  What OS do you have?

  Normally, you can copy videos on the HARD drive first and then try to burn on DVD using Nero or CD Burner XP.

• Equium A200 - DVD drive missing

  Hello

  My Equium A200 is only 3 months old and the dvd player has "disappeared."
  It does not appear in my computer or Device Manager.

  The tray will also not stay closed... any ideas anyone?

  Hello

  The fact is that the CD/DVD drive doesn t need a special driver because the STRANGE simply uses them pilot which belongs to the Windows operating system.

  I think you should check if the CD/DVD drive functions. So how can I test?
  Well, you can try to boot from the Toshiba restore CD to check if the ODD is able to manage the CD.

  I think that whole OS installation is a drastic procedure, but I think he might back allows for the STRANGE.

  Good luck