Equium A200 CD/DVD player - 26 d keeps opening by itself

Starting from my laptop, the dvd player automatically opens and it again whenever I close. Someone else met this, or know how I can stop this?

Hmm. I m not very good but looks a bit like a hardware problem.
In my case, the CD/DVD drive is ejected until a procedure of engraving was finished. This is normal behavior

But in your case the CD/DVD drive does not eject automatically...

Tags: Toshiba

Similar Questions

  • Equium A200 - 1V0 DVD Player error impossible of video output to an external device

    Hello
    I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

    "Unable to video output to an external device. Please spend your
    display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

    I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
    The software used to work properly, and I have not changed the settings at all.

    I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

    Any thoughts would be accepted with gratitude.

    Bufster

    Hello

    I found a boyfriend of the solution.
    How?

    I searched simply here in the forum and found this thread!
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

    Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

    Update the audio driver and you must solve this problem!

  • Drive DVD keeps opening by itself

    Hello

    Since I bought my Dell computer in December drive keeps opening by itself regardless of whether or not there is a CD inside. As soon as I turn on the computer, it opens and opens again whenever I close. I checked properties which asserts that its correct operation and verification of diagnosis stated that all software is very good. Everyone knows about this problem? As I said this happened since I bought the computer and has become more common to the point that it is no longer remains closed unless the computer is off.

    Any help would be greatly appreciated

    There is a disconcerting fix that might work as it did for me. After having done a fairly extensive research going to recharge the device driver, to play with printed circuit boards and connections, I came across a post to discuss how tricky the mechanism and the sensor is to determine if it is closed or not.

    It turns out that the way a lot of people shut the drawer (which they shouldn't) by pressing on it, it can move one or two toothed wheels out of the correct position so shake the sensor opening and closing.

    By slightly pulling the drawer open while pushing the close button, you can pull the drawer toward the setting appropriate for the sensor and hopefully solve the problem.

    It worked for me, after spending months in the open position with no way to hold it closed.

    And for those who want to keep these things work correctly, just a little patient pe and use the open close button. Shoving in this regard is not a good idea.

  • Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

    My laptop seems to have decided to stop reading data disks.
    However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
    I searched internet day for solutions and tried without success to the following:

    Removed the UpperFilters and LowerFilters in the registry.
    Uninstalled and reinstalled drivers.
    Bought DriverWhiz (waste of money!)
    Tried to access disc command prompt that generated the message "incorrect function".
    Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
    Uninstall service packs
    I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
    I uninstalled real player

    I'm about 3 minutes to destroy my laptop so any help would be appreciated.

    Laptop: Equium A200 - 1V0
    Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
    OS: Windows Vista

    Hello

    Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

    How about windows boot CD or a linux live CD?
    Is this possible?

    If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

    In this case, only a replacement CD/DVD drive can help greet

  • Equium A200-CD/DVD-RW does not

    Hi all

    I've had this problem for a few months now and have read a number of similar problems on other forums, but I thought that I had just state my case to see if there were other possible solutions before you give in and buy an external.

    MY laptop is a Satellite A200 - 26 d PSAE5. After several months of working perfectly my DVDRW drive - a pioneer K17A - ATA DVDRW - unresponsive. When all-optical meida is put in the drive, it will attempt to read - you can distinctly hear the disc turns, but it is audibly different sleek over-Rev noise it makes when it was working properly. It is very stop / start, and the player has often been a dull sound when it tries to read. The best way I can describe it is like trying to rev an engine; Looks like the drive is not to achieve the speed appropriate to read, if it makes no sense.

    The drive won't recognize commercial DVD, blank DVDs or old burned DVDs. It also will not recognize blank CDs or self burnt - although oddly, I sometimes get to play commercial CD - but only after a very long time and a lot of the deaf stop / start drive-spinning and noises. When I try to open the DVD player via the Control Panel, it is obviously trying to read, but finally the drawer just opens and the dialog box 'Please insert a disc into drive F:' appears.

    The Device Manager lists the CD as a xair NGL6RKXM SCSI CdRom device.

    I've updated the BIOS, I seem to have the latest firmware and all drivers are up to date. I also tried to remove the filters from the registry under the direction of microsoft support: However, when I tried that I discovered that my register lists only the UpperFilters - the LowerFilters is not there at all. Should I go ahead and remove the UpperFilter in any way, or it will cause more problems that it is likely to solve?

    [Edit to add] Under Vista Home Premium, incidentally.

    Any suggestions gratefully received.

    Thank you!

    Post edited by: marmotgirl

    Hello

    Very strange but it seems that your CD/DVD drive is faulty and must be replaced. You did a lot of things like the update of the BIOS, remove upper and lower filters and therefore the only one that I think that the reader.

    You must replace it with another that is listed in the user manual. Another scratch disk could not work, but if you choose one in the manual it will work because it has the same pinout, etc..

    Good luck and if you have any other questions please let us know.

    Welcome them

  • Equium A200 1v0 - DVD Volume very low

    Hello!

    I noticed DVD playback volume is very low (even when the cursor of the volume on the drive and windows is max had). MP3 playback is very good and volume is much stronger, he just seems to be a problem with playback of the DVD. I tried a Toshiba DVD player software and Windows media player, but they give the same result.

    Someone at - it suggestions?

    Thank you.

    Audio controller: Realtek
    OS: Windows Vista editions Home Premium

    Hello

    I presume that you have played the MP3 from the HARD disc and movies from a CD/DVD player

    In the control panel - settings, you will find different audio audio controllers
    You must choose the reading and put all the controllers of possible sounds at a higher level.

    Best regards

  • pop ups continue to add to update video player and they keep opening keep tabs. How can I stop it?

    New tabs keep open asking me to update my video player

    If the new tabs are relentless, you may need to restart Firefox Safe mode to get little peace. It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

    You can restart Firefox in Mode safe mode using either:

    • button "3-bar" menu > "?" button > restart with disabled modules
    • Help menu > restart with disabled modules

    Not all add-ons are disabled: Flash and other plugins still works

    After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

    Any difference?

  • DVD disc drive tray keeps opening and closing constantly

    FOR WINDOWS VISTA HOME PREMIUM EDITION

    DVD CD ROM DRIVE TRAY KEEPS OPENING AND CLOSING CONTINUOUSLY - GET COMPUTER TO READ DISCS AT ALL - OTHER ASPECTS OF THE COMPUTER RUN FINE - DIAGNOSIS SAY THAT HE DIDN'T THERE HAS NO PROBLEM WITH ANYTHING.
    IN DEVICES, I NOTICED THAT DEVICE DRIVER IS FOR ARCSOFT - THIS UNIT HAS BEEN IN FOR REPAIR, AND I ME ASKING IF IT WAS CHANGED FROM MICROSOFT DRIVER AND WHY? REPAIR SERVICE DID NOT WARN THIS CHANGE.
    CAN ANYONE HELP.
    SAPPHIRE.

    The device driver can say Arcsoft because it may have provided to Microsoft by them.
    In Device Manager, open the Properties window for the drive, and then click the driver tab, then update driver...  Click the search selection automatically. If it finds a driver, let it install.

    If the drive still cycles, then you can have a bad drive. If it is still under warranty, contact the place of repair for repair or replacement.

    SC Tom

  • Equium A60 guard DVD player slide out

    The DVD in my Equium A60 guard player slide out, nothing seems to be fixing it.

    Help?

    See you soon
    ECCA

    Hello

    Check if all screws are fixed and that nothing is missing at the bottom of the unit.
    On some portable computers, the disk is fixed with the screws under the keyboard.
    Maybe you question these screws is missing but I recommend you first to check the background.

  • Equium A200 - CD/DVD drivers corrupt - Code 39

    Help, please. Just mobile. Never used DVD and now it will not work. Hardware Device Manager displays a yellow exclamation point and a Message of corrupted drivers (Code 39).

    I looked up and down for drivers replacing - found nothing. Even tried Toshiba for the BIOS update, as shown in a thread but not my model! (Satellite A200 PSAF5E).

    Not happy going and deleting registry files as much as drivers/model numbers and so forth are never exactly applicable to my machine.

    I would be very graqteful for advice please. Thank you. Bunch of monkey

    Hello

    Please try this http://support.microsoft.com/kb/314060/en-us

    Good bye

  • Satellite Pro A200 (PSAE4): DVD player flashes continuously

    Hello
    I have been using a Satellite Pro A200 (PSAE4) computer laptop for a while now without any major problems.

    My dvd drive (tsst TS-L632H harvest) no longer works since a few days now... Specifically, its LED is permanently orange flashing. The drivers are up to date. The eject button does not work either. No disc is inserted. The car seems fine in Windows Device Manager...

    If opened manually and if the disc is in the drive, I can't see all the data. Cannot start the disk either.

    I'm running Vista 32 bit SP1 with the latest bios available on the toshiba site (2.40).
    Since then, I need to fix the 'black screen' often reported problem before the login prompt, by using the windows installation disc

    Any help would be really appreciated.

    Thank you!

    Hello

    According to your page, you are not able to boot from any CD or DVD, not even the Toshiba Recovery CD.
    Am I wrong?

    To be honest, I've no idea why such question which went past but I think it s related to the hardware failure and that the replacement could help
    I put t know how old laptop is but perhaps the warranty is valid and it could be replaced for free

    What do you think?

  • Impossible to install the HD on my Satellite A200-1PD DVD player

    Hello and sorry for my English

    I have to upgrade my Toshiba with Windows Ultimate edition, do a fresh install with format of HARD drive.

    Now, the HD DVD version of the player 'hddvdpl - 20080328112606.zip' 4.51.07 can't be intalled.
    The installer says that the HDDVD Player cannot be installed in my computer.

    What is the problem?

    Thank you very much

    Perhaps the HD DVD drive is not designed for you laptop.

    What cell phone do you have exactly?

  • Equium A200 - CD/DVD drive is not detected

    I can't open any CD/DVD disc. The drive is not detected.
    When checked in the management system, he demonstrated, the drivers are missing or corrupted.

    How do I download the drivers? Or is there another solution?
    My model number is PSAF5E
    Serial number is YT144538Q
    And the CD/DVD device is POLE * DVD / RAM UJ-850 s ATA device

    Hello!

    T, you can download or reinstall the CD/DVD driver because it s a part of the OS (operating system).

    It would be interesting if the BIOS can detect the drive. Please check this box.

    It would also be interesting if you have an error as the #19 error message. This is known and a search around the forum.

    Good bye

  • Windows Media Player keeps opening by itself. Whenever I close it, it opens upward again.

    Also, when it is open, it keeps dominant control of pc by making the application active every few seconds.  If I go into another window it comes down soon to WMP as the active application.

    This is a new computer.  He did not at first, but began to arrive a few days after installing iTunes.  I realized that I was still running SP1 of Vista so I downloaded and installed SP2.  He ran for awhile ok then after a few hours of running WMP began to open again.

    Sometimes he begins to start and sometimes it starts after the computer is running.  The last time he started to happen, I was in the middle of another windows update software and was not actively working on the computer.  Just run the update.

    It won't let me be disable it with the Task Manager.  As soon as I stop the application it opens right away again.

    I searched my card documents and settings of virus with the latest free version of AVG and it is came with a Trojan infection and moved to the vault. This solves the popping up of WMP: D!

    In addition, the Trojan horse was named "Agent2.BMMK Trojan horse"
    See you soon and I hope this has been useful to some ^^
    EDIT: I have the Lycosa keyboard also but have never had a problem with WMP pop-ups until today. Could be the keyboard, but there still everything went well after the removal of the Trojan horse.
  • Mac Book stop with the movie in the dvd player, and now it opens in the reset password screen?

    I'm running OS X El Capitan 10.11.5 and my daughter and her friends used to watch a movie last night and stop it before releasing the film. My Mac Book Pro is the start of the password reset screen/mode? It gives me only 3 options, none of which is true. (1) I forgot my password. (2) my password does not work when you connect 3) my keyboard does not work when you type my password to connect? When I opened the Apple on lft albums he gives me a boot disc, restart and turn off? I tried all the options and it restarts just on the same page? Someone at - it advice? Thanks in advance!

    The appearance of the password reset screen indicates FileVault2 is enabled on your MBP. Fix?

    If so, that'll probably get you out this Pickle: https://derflounder.wordpress.com/2015/01/17/yosemites-filevault-2-pre-boot-reco very-options /

Maybe you are looking for