Equium A200 - not lighter in the EQUIUM label

Similar Questions

• Windows Defender does not light in the center of the Action. I deleted Norton

  I have Windows 8, firewall, & cancelled Norton. I want to erase Norton. Windows Defender does not light in the center of the Action.

  Thank you in advance.

  If you turn your active antivirus protection on the Defender will run in this case too. I tried it on my Windows 8 Pro PC. I managed Antivirus and when I disable its protection active and turn the Defender Defender works with accuracy.

• I don't know but its all white: my tablet screen does not light, but the sounds and touch are ok. Please help me!

  I dropped it and now the screen does not light, but sounds like the notifications are on.

  Hi!, Sensei:

  Welcome to Forum!

  To help you, is necessary that you enter make, model (without serial number) and operating system.

• laptop screen does not light and the system does not start most of the time.

  my hp g62 lptop started not starting and the monitor not turns sometimess even if it lights. with the time he had this problem more frequently. now it does not start and the monitor turns at all.  It will fuel yet but it's going to be okay. Ive tried a recovery disk, but it does not start the machine or be the monitor lights. im a beginner so any help will be appreciated.

  Hello

  This may be a trial outcome disply to connect an external monitor to your laptop and see if you get display it.

  You can connect to an external monitor via VGA or HDMI connection.  The usual process to transfer the video output to an external source is to press and hold the fn key and press f4.  Use the arrow keys to select "Projector" only and press ENTER.

  http://support.HP.com/us-en/document/c02013758

  and I also found some links that may help you

  http://support.HP.com/us-en/document/c01884928

  http://support.HP.com/us-en/document/c01443371

• Screen does not light after the start, but after standby on Satellite M100

  Hello
  I have some experience with computers and laptops, but this problem exhausted all of my knowledge.
  My girlfriend has a Toshiba Satellite M100, PSMA1E. He currently works on Windows XP, SP3.
  The laptop has always had problems closing/stand bye. He would stand bye and the screen would not. She would usually be manually turn off (holding the power button) and restart.

  Same thing happened last week, but with me. I turned off the power button but when I turned it on the screen was completely black. After a few attempts, I realized that everything worked; I could hear the usual audio files and XP Boot, but there was no way I could get the job of the screen.

  The strangest thing is that the CMOS/BIOS, one with the Toshiba logo settings screen, also does not appear. If it's an OS problem, I thought that I would be able to access the BIOS at least, but it does not work. FN + F5 does not work.

  Then, strange yet something happened. I was turning it on and off with keyboard shortcuts and I realized that if I put on stand bye using shortcuts and then go back on the screen turns on perfectly well (there is a cause of adjustment resolution icons are irrelevant, but it works perfectly fine).

  From that on I tried everything I know. Update the BIOS, all Windows XP updates, all Toshiba QuickFix, cleaning the registry with different tools, uninstall and reinstall the video driver (ATI Radeon X 1400) utility, shortcuts keyboard, power saver, tools hardware Toshiba, looking to start up programs, services, everything I could possibly think off.

  What intrigues me is that the Toshiba start screen will not be displayed. I can't access the BIOS, but I tried to restore the standard values of the BIOS with Toshiba hardware tools. It did not work. I don't even know if reinstalling XP will work because whenever I turn it on it is all black and I have to make the stand bye / Tower on Tower.

  When I have it plugged into an external monitor, I could see all starting the process (initial screen of the BIOS and Windows). I then tried to access the video driver display configuration but it would show only the external monitor. It would only detect the laptop screen after a stand bye / turn back on, and then it worked perfectly: the screen two screens simultaneously, extended, everything. Ah, changing BIOS selection automatic the LCD + external monitor does not work.

  I am really puzzled here and I can't understand it. I really don't think it's a hardware problem, because the screen works 100% after the stand bye. I guess that XP is do something during the closing down that completely 'stops' my screen, even after starting, and then I can only turn it on with the thing stand bye.

  Any help would be really appreciated!

  Best,

  Hi guys

  I had a similar problem on a series of Satellite A200 and I could solve works to update the BIOS and update the graphics driver.
  In addition, you must make sure that all available MS fixes and patches have been installed.

  Unfortunately, but that's all I can suggest. If the problem persists and you would not be able to solve update components then an ASP needs to check.

  Good luck

• Help internet wiith does not not & light on the ethernet modem. Should I replace my card?

  I hope someone can help me with a problem. I'm having with my ethernet cable.

  I have a presario sr5313wm with vistahome premium 32-bit

  My broadband was working fine when I left for work. When I got home, I haven't had any 'zone connction' when I run diagnois he says I have no cable. Cable ethernet light is out on my modem (2 wire model4011G). I replaced the cable and it still does not work. When you look at the Jack on the back of the computer that you connect the power cord on the Green and orange lights.

  I did troubleshootig with netzero and the modem works (the laptop plugged in). They say that maybe I need a new network card.

  Is there something else I should try b-4 replacement parts? I also checked on this website and found no driver updates to try for my vista.

  Thanks for any help you can give

  Scott,

  Thanks for all your great ideas. I gave up and bought a usb wireless adapter. It worked GREAT!  My network card must not have been good. Thanks again.

• My 40TL933 Toshiba TV does not light with the command

  Hello

  I have a Toshiba 40TL933 TV and remote turning on change of LED from red to green, but the screen goes black, no load. It has happened three times since I bought and barely a month ago.

  The current disconnect and re - connect and then it works properly. Don't you think that it may be by the software, which should have put updated?
  Thank you very much

  Same thing happened to me today. I bought the TV week ago and updated firmware this weeek.
  Had to unplug TV to make it work.

• My satellite phone battery does not light and the battery won't charge (rest on 2%)

  Basically, my laptop is 3 months old and I don't know why it's acting weird. First of all, when I bought the laptop in June 06... the first week the laptop has no power in battery mode. So I stopped using the battery mode and still had to use my power adapter to power my laptop.

  Now 4 weeks later, I removed the battery to the rear and put again. Guess what the battery started working. Now 2 months later the same problem occurs, only that this time after removing the battery to it still turn on and the battery says 2% and also fails to load.
  So I m stuck with my son again... can anyone help?

  Hello

  In my opinion the best solution is to confront your local dealer with this problem. If I were you I wouldn't waste time. Unit is fairly new, warranty still valid and unit should operate.

  Perhaps is there some problem with electronic supply power.

• The COA label on my computer is damaged and unreadable. Is there a return towards the high that nowhere elsewhere in the computer?

  The COA label on my computer is damaged and unreadable.

  Is there a return towards the high that nowhere elsewhere in the computer?

  My computer has been deleted and everything (including the pilot) and is now saying my windows can not be true, the COA label was on top of the computer, however over time it has been worn away in some parts.

  Can anyone help?

  You must contact the manufacturer of your computer for help.  The information on the sticker is not stored or duplicated anywhere else on your computer.

  "gordo2k6" wrote in the new message: * e-mail address is removed from the privacy * _xp...

  The COA label on my computer is damaged and unreadable.

  Is there a return towards the high that nowhere elsewhere in the computer?

  My computer has been deleted and everything (including the pilot) and is now saying my windows can not be true, the COA label was on top of the computer, however over time it has been worn away in some parts.

  Can anyone help?
  - http://answers.microsoft.com/message/027d073c-09ca-45b1-aa47-40e3e2d22ab7
  Meta tags: windows_install; windows_xp

  Game, April 5, 2012 09:07:03 + 0000: CreateMessage gordo2k6

• HP Envy laptop monitor does not light

  Just bought this HP Envy with Windows 8 just over a month ago.

  Today, after the installation of an HP recommended that Windows Update the monitor does not light.  The power led is on the internet led is activated and the CAP turns on if you press.  Still no monitor.

  Bought it at best buy and it's a drive of 1 1/2 at this store if I have to take it to Geek Squad

  If you have windows 8.1 on it then it looks like the update of kb2903939 killed. I fight with this problem since Christmas.

  Power cycle the cell several times without leaving start completely. It should bring up a screen of recovery. If you can find the path to start safe mode, you can uninstall kb2903939 and then restart. That fixed my problem.

  Otherwise, it should be a call to HP or Microsoft support.

• Equium A200; How to order the recovery CD

  When I buy my Equium A200 computer in October/November of this year (2007), I was surprised to not find DVD/CD recovery with the package.
  I contacted the store where I bought the computer from and they said they would be arange to be sent to me.

  They say now that the CD is not their problem.
  What the problem is then it. Contact the Toshiba ASP?

  For me it s very strange that the Toshiba Recovery CD was not shipped with the laptop.
  Usually the recovery CD should always be supplied with the device.

  Anyway, the ASP (authorized service provider) may sell the right recovery CD/DVDs. Contact the guys in your country and ask for the CD compatible and right.

  Good luck

• Equium A200 - how to get the operating system?

  Hi, my son has just been given an A200 and we put in place a new disk hard in, but we do not have the recovery disks. Anyone know how I could get my hands on copies or how to download the operating system and then is just a matter of inserting the disc?

  Tony

  Hey Buddy,

  First of all I must say that it of not possible to download the operating system. It s just preinstalled on your laptop and you can find it on Toshiba Recovery disk as well.

  If you don t have a recovery disc, you can order one from Toshiba but I m not 100% sure if it of possible old Equium A200. Just check the online store:
  https://backupmedia.Toshiba.EU/landing.aspx

  If you can t order it, ask a service provider authorized in your country. Maybe they have such a disc and can give you.

• Equium A200-1V0 - recovery on the new HARD drive problem

  Hello

  Hoping someone can help, I just mounted a new Toshiba 1 TB hard drive for my Equium A200-1V0, used the Vista came with the computer recovery disk, everything seems to be installed ok, but when you try to start, I get a message saying that Windows Vista is unable to run on this hardware. Any suggestion is appreciated.

  Thank you

  There must be a compatibility problem. Usually the hard drives up to 500 GB are not problematic for the old machines.
  If possible, try to install the version of the OS. When you can get Win7 32 bit would be great. Win7 32-bit is supported for your machine and in my view, it will work perfectly.

• -What is the image of the Equium A200-1V0 correct on the website?

  As noted above, is the image of the Equium A200-1V0 correct on the website?

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=138201

  When you enlarge the image, it is said by Satellite on the front of the laptop (as for Satellite laptops).

  Can I be assured that the laptop will look exactly like this (with or without the 'Satellite' on the front), I like the design and do not want to end up with something different.

  Help is much appreciated, thank you!

  If you answer with you email address I can take some pictures high resolution of mine and you send to compare :)

• Equium L20-197 does not light up at all - on button / stop flashes and nothing happens

  Hello

  I own an Equium L20-197 and it currently has a power problem. It does not light up at all. When the device is connected to the machine the orange light comes on to show that there is a power source but when I hit the power button the flash just buttons and nothing happens.

  If I hit him again once all the lights go out and the whole system fails.

  Any ideas on how to solve this problem?

  Thank you
  Alan

  Hello

  Did you put this phone in the standby or hibernation mode?

  Read this description, it seems that the laptop has been in one of these modes and cannot wake up.
  Try to remove the battery from the laptop and unplug the power adapter.
  Several waiting time (~ 20 min) and reconnect the battery and the AC adapter.
  Then try again to put the laptop.

  If she will not be able to boot up the laptop I presume the ESF on the dysfunctions of the motherboard.
  In this case the contact of technicians would be desirable.