Equium A210-1AS - cannot update windows Vista

Similar Questions

• Cannot update Windows Vista kb971468 due to the error message 800B0100__

  Cannot update Windows Vista kb971468 due to the error 800b0100 of message

  Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001":
  http://support.Microsoft.com/kb/958045

  Vista SP1 or SP2 installed?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Equium A210-1AS - after update BIOS screen no longer works

  I tried to find the same problem but impossible.

  I had to reinstall Windows Vista after mistakes with programs (recovery was useless so install fress was necessary) and everything worked fine. I downloaded all the drivers and updates section of drivers Toshiba, I installed the ATI graphics driver, then update the BIOS.
  While the closed laptop, now when I turn it on, the fan on the works of graphics card, battery, power and load turns on but the screen remains off (not illuminated). I tried an external monitor and the same problem again. As the screen worked fine until the update im guessing its something that the BIOS has done, or the graphics update.

  TOSHIBA SATELLITE A210 - 1AS
  PSAFJE
  -AMD Turion 64 X 2 Dual-Core Mobile Technology TL-58-
  Genuine Windows® Vista® Home Premium edition-
  DVD Super Multi (Double Layer) drive-
  2 048 (1 024 + 1 024) MB of RAM DDR2 (667 MHz)-
  15.4 "TFT display 1280 x 800

  Thanks to all who can help.

  To me, it sounds like the update of the BIOS's not on your laptop. If the BIOS update fails more often than computer start doesn t more you can see anything on the screen but you can hear the fan, etc.

  In any case, you can try this workaround: remove the battery and the AC adapter. Wait an hour and then reconnect the two devices. Now try to start Notepad and hope this works ;)

  If it doesn't work, you should contact the nearest authorized service provider. Technicians can try to reflash the ROM module

  Good luck!

• Cannot update Windows Vista - said there download but nothing happens

  Help. I'm not an expert. Will someone please give me instructions on how to update windows for Vista work?

  Thank you

  Manually install KB3177725. The value of the automatic updates to 'never check updates' and restart Windows before installing. Download links:

  http://Wu.krelay.de/en/

  Best regards, VZ

• WRT 310N worm. 2. cannot update Windows Vista and Norton 360 since I installed this router

  Hello world

  As the topic title says, since the installation of the router WRT 310N worm. 2 on my laptop, Windows Vista, and Norton 360 can not be changed - I continue to receive operation failed errors whenever I try to download the latest version of the software updates or antivirus. Generated error doesn't also have a HelpFile associated with it.

  I went to the admin settings, but since I'm pretty new to routers and wireless technology in general, I'm a little busy with what we have to try so I thought I'd come here and ask the experts.

  Would be very happy for any help!

  Thank you very much
  John

  Thank you, great_white. I will try that first thing when I get home!

  I'll keep you and all readers display updated on what I find.

  Kind regards

  John

• cannot update windows vista error code 80080008.

  Tried this:

  "Click Start, select run, and type the following (pressing well after each one):-

  NET.exe stop wuauserv

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 wuaueng1.dll
  regsvr32 c:\windows\system32\dllcache\wucltui.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 wups2.dll
  regsvr32 wuweb.dll
  Regsvr32 MSXML3.dll

  NET.exe start wuauserv ".

  The third command 'regsvr32 wuaueng1.dll' I get the error message that the specified module could not be found.
  What to do next?

  Is this the same computer (not necessarily the same problem) as in this other recent thread of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/ive-got-windows-vista32-bit-windows-update/868fa783-a555-41bc-bab5-1a4771c37f43

• Re: Equium A210-1AS - blue screen and cannot start

  My computer was working fine, I stopped him, the next time I start up, it shows windows loading screen, then a second a blue screen flashes by, it restarts and repeats, I stopped and began to tap F8 until the advanced boot options appears, safemode ect... None of them work and lead all the blue screen If I select the repair option at the top 'Repair your computer' it begins to load with a background of vista and a cursor and then displays the error "the installed program cannot start. Click OK to turn off the computer. »

  in Advanced Startup Options that I try "disable automatic restart in the event of system failure" and the rest of the blue screen to the top, so I can see, it shows an error on usual blue screen, read:

  UNMOUNTABLE_BOOT_VOLUME
  STOP: 0X000000ED (0X85DDA600, 0 X 0000000, 0XC000009C, 0 X 0000000)

  I don't have a recovery CD, as I believe, there is a recovery partition, but I don't know how to access it-
  I use Equium A210-1AS
  Part number: PSAFJE-005005KS
  Windows vista 32 bit

  Thank you

  I know know that the recovery partition is consulted theough 'Repair your computer' but shows just "the installed program cannot start. Click OK to turn off the computer. »  :/

  null

  > I don't have a recovery CD as I believe, there is a recovery partition, but I don't know how to access to this

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

• Equium A210-1AS: Windows unexpectedI/Oerror bootmanager status took place

  Hi everyone, I really hope there, can someone help me today!
  My daughter is in the middle of her GCSE exams and has a problem with its Equium A210 - 1AS.

  It was working fine until last night and now all she gets while booting is:

  "Boot Windows display manager".
  Windows has encountered a problem communicating with a device connected to your computer.

  Thiserror can be caused by unplugging a removable storage device, such as an external USB drive while the appliance is in use, or by faulty hardware such as a hard drive or CD ROM drive which is a failure.
  Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  File: \Boot\BCD
  Info: An unexpected i/o error has occurred.
  ENTER = continue»

  She said she had her sex cam plugged and I tried to restart and reconnected, but this has not solved the problem.

  There, can someone help me please because we are desperate to work on his pc!

  Thanks a lot if you can.

  Kind regards
  A

  Hello

  > She says she had her sex cam plugged and I tried to restart and reconnected, but this did not solve the problem

  Is this means that the laptop can not boot Windows OS?
  Please disconnect any external devices. Then switch on and press F8.
  Now you should see the advanced boot menu.
  Please check if you start the machine in safe mode.

  Otherwise I recommend the BIOS.
  Ensure that the HARD drive has been recognized by the BIOS.
  If there is just no drive listed then the HARD drive could malfunctions.
  If the HARD drive is there, so you must set it as first boot device.

  If anything would help him, then a system restore would be desirable.

• Equium A210-1AS - it gets hot after BIOS update

  Hey, I was wondering if anyone can help here...

  Currently have a Toshiba Equium A210-1AS with BIOS version 1.80 worm 1.00PARTTBL 08/04/2008.

  Given that BIOS has been updated for a long time in this version 1.80 the computer became hot very quickly and therefore the laptop performance declined.
  I looked on the Toshiba support site and upgrade only version 2.00 was not compatible with this laptop.

  Any help would be greatly appreciated. Short model number is PSAFJE
  Thank you

  Hello

  I checked the site Web of Toshiba and I didn't see any BIOS update for satellite A210 PSAFJE. This means that an update of the BIOS was never marketed for this laptop, normally.

  To me it sounds like that you have updated the BIOS with one version for another Equium A210. So, you should go to an authorized service provider. Technicians can install the right version of BIOS for you (downgrade).

  Good bye

• Equium A210-1AS: Touchpad problem - the mouse becomes unusable

  Hello

  I have problems with the touchpad of my laptop Equium A210-1AS.
  After some time of use of the mouse becomes unusable and just starts bouncing around the screen and becomes uncontrollable.

  The only solution then is to unplug the laptop and turn the power off, re start the touchpad works again.

  I use Windows Vista and downloaded the latest touchpad drivers.

  Any help would be appreciated.

  See you soon
  Widdy1961

  This problem very strange s.
  Could you please tell me if this problem occurs after you reinstall the OS from the Toshiba Recovery CD?
  I read on several forums of Vista that some Microsoft Vista updates may have a bad influence on the touchpad driver
  Therefore, it would be very interesting to know if this problem appears immediately after the use of the recovery CD.

  Greetings

• A few problems with my Equium A210-1AS

  OK, having some problems with my Equium A210-1AS and if all goes well there's a simple answer that someone here will know...

  First of all how hot is the laptop supposed to get... Mine seems to get the point where it is bad uncomfortable typing as the areas around the mouse pad plastic get really hot and the underside of the laptop is very hot, too... but this is crazy as the system itself was never to the point of crashing or anything through heat... Well well not that i know of anyway.

  The second question that I met while surfing on the net as is every now and then it seems the internet just completely dies and is loading not pages... It's the same thing on Internet explore, firefox and chrome! None of them will display websites - and that's with or without firewalls - it get just halfway through the loading status bit bar and you're nothing... If I close one of internet browsers and try and open them again he won't let me as I said there is still a version running... and when I go in the Manager of tasks, there is nothing in the window but the browser process is still running under the tab process... and no mater how many times you click it and end the process there is always there... The only way I can get rid of it or get the internet is to make a hard re-boot... which seems to take forever to shutdown before restarting (or quckily if I hold down the power button, but I do not do that!)

  Get IT is really annoying! as it is not within the time limits or any of some websites that I can pin point... It is randomly... sometimes as fast as 5 minutes... Other times, it can go more than 8 hours and stay working...

  It is not the router connection or by phone if my desktop machine works no stop without problem as do other cell phones in the House... It's just what seems to be the problem.

  Computer laptop im wise under a Toshiba A210-1AS with Windows Vista Home Premium service pack 1...

  So any ideas what could be the problem or, more importantly, a solution!

  On the first problem: I would like to clean the fan. Do not disassemble the laptop. Use the jet of compressed air and could blow the dust from the cooling fans.
  If you have any success with this tip, I would go to a local ASP. They should check your laptop.

  For the second question I would first do a driver update from the LAN or WLAN. Furthermore, this type of connection you are using?
  If you use WLAN make you the laptop and the router uses the same standard. In addition, the intensity of the signal should be good or very good.

  Tell me what happened.

• Question about the power of the battery on Equium A210-1AS

  Hello...

  the battery on my Equium A210-1as life is supposed to be around 2 and a half hour but it s more in 20 minutes.
  No idea why?

  That sounds like a bad battery.
  I think that Windows displays a fully charged battery or not loading stops at XX %?

  If your laptop is still under warranty, go to a local ASP and allow your battery to change.

  If your computer laptop doesn t have guaranteed, an ASP may also make a bid for a new battery. This part doesn't have to be so expensive.

• Equium A210-1AS sometimes stops

  My recently purchased Equium A210-1AS sometimes completely cut and the screen is blank. Someone knows why?

  Maybe a little better explanation of the problem can help to better understand what's happening exactly and how many times.

• Equium A210-1as turns off during the Bios flash

  Hello group,

  My computer laptop girls off for a flash bios because of blocked fan (dog hairs dust etc.) and its fried bios chip.
  I think that there is a partition on the Bios chip which can upgrade the bios in a critical state of flash using combinations of keys.

  I tried all of this and have a laptop dead yet.
  I contacted someone on the net that sells preloaded Bios chips and instructions to replace them, but I must first of all identify the chip on the card.
  Is there any reading that can identify it for me on a toshiba Equium A210-1as... psafje-005005ks

  Thanks for any help Paul G...

  Hi mate

  Usually it s is not necessary to replace the BIOS ROM chip on the motherboard.
  In most cases, the ROM module has to be reflashed again.
  It seems that the module ROM was not properly flashed and the process interrupted
  The technician of the ASP can reflash the module using a disc of the BIOS crisis.

  I recommend you to get in touch with the guys from the ASP in your country and ask reflash BIOSES.

  Good luck

• Messages to update Windows Vista 64-bit driver for Qosmio F30 Vista 32 bit

  Hello

  Today, I noticed that, update Windows Vista displays the bad update for one of the drivers of Qosmio F30.

  I have Windows Vista 32-bit, but Windows Update post a 64 bit version of the driver.

  See the screenshot [here: http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]

  Any idea?

  Hmm... it's strange?  :|

  The ACPI from Toshiba x 64 compatible driver certainly means a 64-bit version!

  I put t know why Vista driver update notification indicates a 64-bit to a 32 bit OS driver, but usually the 64-bit driver should not be compatible with the 32 bit OS.

  However, the deal seems clear don t install if the pilot is not designed for your operating system.

  Concerning
  …