Equium A210 - after that set BIOS to update the DVD player has stopped working

Hi, since I have recently updated my BIOS, my DVD drive has stopped working on my Equium A210-1AS with Vista 32 bit.

I tried the program fixme Microsoft who does not work, upper and lower register isn't here ether in regedit.
Someone at - it solutions for getting the DVD drive working again?

Thank you



The CD/DVD drive is listed in Device Manager? You see an error code?
If the drive is listed in Device Manager, you should try to remove it, and then restart the laptop.

Try to load the default settings in the BIOS.

Have you tried to remove the upper and lower filters by yourself? Here is the solution from Microsoft:

Good bye

Tags: Toshiba

Similar Questions

  • Satellite L - after that set BIOS to update the screen is black


    I made an update of the BIOS on my Windows 7 64 bit, then the OS get frozen. After I restarted the laptop, ago just black and nothing appears on the laptop.

    What can I do?

    > What can I do?
    Time for boyfriend to ASP.

    It seems your BIOS did not complete successfully and the ROM module where the BIOS is stored has been damaged or has been flashed properly.

  • After using the EPSON WF-3520 installation CD, the DVD on my Vista PC player has stopped working.

    I use a three-year-old Toshiba Satellite A355.  The Eastern question is HL-DT-ST DVDRAM GSA-T50F Up at this time yesterday, it had been working flawlessly.  Now, it only makes clicking sound, but does not open.  Device Manager says "this device is functioning."  No, it isn't!  EPSON help guys said that they had had some problems with the contractor providing the installation disc, but no one else had complained that the DVD player has stopped working.  I want to just get it repaired.


    Check out these links which will solve your problem
  • After execution of the new updated Adobe, HP Elitebook 2760p left click on the touchpad button has stopped working.

    Original title: left click not working not not on HP laptop

    On my HP Elitebook 2760p running Windows 7 Pro 64 bit, left click on the touchpad button has stopped working.  The right click works, the works of pad, (scrolling and click on) it's just the left click.  It started after the execution of the new update of adobe. I tried to uninstall and reinstall the driver synaptec. I tried the mouse fast and slow speed. I tried pressing rigid, flexible, in different places. I would try to uninstall the update from Adobe, but it won't allow me.  So I uninstalled Adobe Reader and re-installed. Still nothing. Any suggestions?

    Hi cyrilmillot,

    You try to run the Adobe Reader removal tool to remove the Adobe reader completely the system software.

    See the link to Adobe to download the removal tool:

    Adobe Reader/Acrobat removal tool

    After retiring, you can check whether the left click works. If it does not, you could get in touch with Adobe support for further assistance on this topic:

    Adobe forums


    If the problem persists, then it may be a hardware problem and you may have to contact HP support for further assistance:

    HP support

    HP laptops - use and configure the TouchPad (Windows 7 and Vista)

  • I get the message "firefox has stopped working" after closing browser


    My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

    A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

    It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

    Is there anything else I can try? Thanks in advance for your suggestions.

  • the backup was told that the com surrogate has stopped working I have what to do, I can back up my files on a disc

    I click on start I'm going to the backup and restore, that a window appears which says COM surrogate has stopped working.  It says windows notify me when a solution has been found.  That a window opens for to upgrade me the computer.  The computer is updated.


    read the information below


  • Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

    I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

    This happened to someone else? Is it I can do it fix it?


    Since you get such a serious mistake, I would use the free incident reports.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates

    The security updates, you can get free support Incident report

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.



    Signature of the problem:
    Problem event name: APPCRASH
    Application name: DVDMaker.exe
    Application version: 6.0.6002.18005
    Application timestamp: 49e02385
    Fault Module name: ASAudio.ax
    Fault Module Version:
    Timestamp of Module error: 48119577
    Exception code: c0000005
    Exception offset: 00010416
    The system version: 6.0.6002.
    Locale ID: 1033
    Additional information 1: fd00
    More information 2: ea6f5fe8924aaa756324d57f87834160
    Additional information 3: fd00
    Additional information 4: ea6f5fe8924aaa756324d57f87834160


    Hello jael_silva10,

    Thanks for posting on the Microsoft answers Forum.

    Click the KB article number below to view the CD/DVD issues KB article.

    KB Article ID: 929461 -CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    There is a DIFFICULTY HIM that will run automatically if you want to try or you can try the manual resolution.
    This should help with your problem of DVD.
    If please reply back and let us know the results.

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • my dvd drive has stopped working. says windows cannot load the device driver, can be corrupted or missing code 39. When I search for updates, it says I have the most up to date. Help!

    drive is Matshita DVD-RAM UJ-850 s a SATA drive

    I use windows Vista

    Driver provider Microsoft

    Day 21/06/2006

    Version 6.0.6002.18005


    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

    When you insert a CD or a DVD, Windows Vista may not recognize the disc

    Your CD or DVD drive cannot read or write media - A Mr Fixit

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    Drive CD - R or CD - RW Drive is not recognized as a recordable device

    Hardware devices not detected or not working - A Mr Fixit

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.


    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Pro L10: After using a wireless mouse, the touch pad has stopped working

    Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

    I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

    Can you help me?


    It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
    I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
    I guess that you are having regular problems with a USB mouse.

  • Center Store Update Windows Media Manager has stopped working?

    Lately when I start my computer, I get this error message Windows media Center Store Update Manager has stopped working. Its happens after about 10 or 20 Minutes. At first I didn't think much, but now I noticed that the Media Center window is no longer the recording programs, I have planned. The strange thing is when I go into Windows Media Center display at the request, he says that he record but is not. The error message also appears when I try to update the guide, what happens to about 80%, then the message.

    Here are the details of the error message

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: mcupdate. EXE
    Application version: 6.1.1000.18307
    Application timestamp: 4b15b191
    Fault Module name: KERNEL32.dll
    Fault Module Version: 6.0.6002.18449
    Timestamp of Module error: 4da47967
    Exception code: e0434f4d
    Exception offset: 0003fc 56
    The system version: 6.0.6002.
    Locale ID: 1033
    Additional information 1: fd00
    More information 2: ea6f5fe8924aaa756324d57f87834160
    Additional information 3: fd00
    Additional information 4: ea6f5fe8924aaa756324d57f87834160

    Read our privacy statement:
    Can someone tell me what that?


  • Cannot run Lenovo System Update error tvsu.exe has stopped working

    Original title: tvsu.exe has stopped working

    When I run it on my WIn7 64 bit notebook Lenovo System Update v4, I get the following:

    TVSU Application has stopped working

    A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

    I called Lenovo and they say it's a Windows problem. This message looks like a standard message for a particular type of problem. Ideas for a solution?
    Thank you

    Thanks, Eddie!

    I've been reluctant to use these registry cleaners too but had no choice. They well with basic cleaning after uninstall. It is heartbreaking how reckless SSII is during the cleaning of the registry during the uninstallation of their software. And some of the best cleansers will warn you if a fix is dangerous or not you can not run it. But what sometimes happens is that vacuuming can cause two problems for everyone that it fixes if you aren't careful.

    I'll try to post on the site you posted. I'll post here if it helps.

  • How to get back to be able to send photos to send, it now tells me that the internet explore has stopped working

    I cannot send pictures with my emails... This has happened last week... The information window told me that Internet Explorer has stopped working... what caused that?

    I have a Hotmail e-mail address now... and its working fine... Please help

    To see if a fix is available

    In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

    You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

    Programs like Windows and Internet Explorer explore the host of other programs. When the addon programs have a problem the explorers blame themselves because they are the host.
    To disable addons for Internet Explorer.
    First test IE without any addins loaded: start - programs - Accessories - System Tools - Internet Explore (No. Addons).
    In Internet Explorer, click on Tools in the bar commands, and then Internet Options and click the Advanced tab, and then click reset.
    To manage addons on an individual basis in Internet Explorer click on Tools button on control bar - Manage the Addons - Activate or disable Addons.
  • After that put 5.3 to level of provisioning has stopped


    I've updated to 5.2 to 5.3 and I cannot Manager to set up office pools.  I restarted vCenter the composer and nothing. Also I can't find any errors.

    Any ideas?


    You have more than one connection to the server?  If so, stop all servers connection and then restart them upward.  That happened twice, usually during upgrades.  It is caused by the connection servers get out of sync and the only way to force them to get back on the same page is for them to force them to restart.  He called something along the lines of one "VCCache" or something like that, with VMware support is the connection Server databases be out of synchronization.

  • After say - and reconnecting battery CMOS, power supply T400s has stopped working

    Hi all

    A few days ago, I had to say and then plug back the CMOS battery. After putting my T400s back together, the power supply in power did not work more (the computer is plugged in and power cable works fine with other computers, but it will not provide power to the T400s). Cannot charge the battery either!

    A I unplug/break something in my quest for reset CMOS? There are simple things that I could try to get it working again?

    Thank you very much


    It doesn't have to be plugged into the power problem, but a discharge of static electricity isolated were able, then you could also try to reset the bios of the laptop again by removing the cmos battery.

    Most likely, you've killed one of the power circuit element when you tried to remove the cmos battery without first statically discharging yourself.

Maybe you are looking for

  • Other ways to access to the control center

    I'm a quadriplegic and can't touch to the iPad, but I use the switch access. That leaves several things that I can't because you have to do some kind of shot or another action. I was trying to find another way to bring up the control center, since I

  • Official charger Apple Watch gives collateral charge not supported message

    I have 2 Chargers for Apple Watch.  The one that came with the watch and the 2nd I ordered directly from Apple.  In the last 2 weeks, two chargers are showing a message that recharge with this accessory is not supported by Apple Watch intermittently.

  • Printing status windows interface has stopped working

    Original title: what to do when I try to print a statement and get a message {windows printer interface status stopped working]The document is through Adobe reader

  • Growth of hidden Windows files

    I have more 1 908, 11 238 files of the type ' $NtServicePackUninstallIDNMitigationAPIs$ ' 2.51 GB of occupation. Thay are multiplying faster than rabbits and occupation of the CISC more space. Can I safely delete these files? Colin

  • HP Support Assistant send me inaccurate information

    Hello, I own a dv6-7135nr Pavilion Entertainment PC, running Windows 7. I noticed a lot of exclamation points! hovering over my question mark of HP Support Assistant. I'll go and since I can't copy and paste, I have to type all this here. One is for