Equium A300D - 16 c - battery not detected after replacement

Similar Questions

• Qosmio G10-133 - battery not detected after upgrading to Windows 7

  Hello, I hope someone can help my frustrations here.

  In recent weeks, I successfully upgraded my laptop to Windows 7, an increase of memory to 2 GB, bought new power cord for laptop, new battery and resolved all the issues that Windows 7 has cast on me. The laptop and runs like one dream other than a question that seems to have had worse.

  The laptop no longer recognizes the new battery. (battery with a cross through it and a photo of current) For about a week after installing the battery, this has worked fine but now does not detect everything. I don't have any errors in Device Manager and windows recognized the ACPI etc battery inputs and has no problem. I also loaded the package of Toshiba value added that Windows 7 has found for me but still nothing. Battery not charge even though sometimes the battery works for about 30 seconds to start up if the battery is back removed and implemented, then stops again (once Windows loaded) I tried many things like the disabling of the driver, reinstall battery etc, but nothing. I tried the iniitally of battery with Windows XP and worked well.

  I have also searched the web and saw that many other laptops with Windows 7 have had this problem, including Toshibas. Some say update the BIOS, but Toshiba have not released an upgrade from the original in 2004 (which is for WIn XP Media Center), and there is no settings in my BIOS for ACPI etc.

  In addition, I can not calibrate the battery because I can't do anything with it. I don't think it's a question though.

  If anyone has any ideas I would really appreciate it or all the links to the drivers etc.

  If this is sorted my laptop should last for 5 years!

  Thanks for reading this.

  Dickie

  Hello

  First of all, I doubt that many other laptops equipped with Windows 7 have this problem. I've never heard of this and normally charge the battery will not be controlled of the OS. It happens automatically and your battery will be charged if the AC/DC is plugged. If the OS doesn't affect it!

  To be honest, I also don t know why your battery isn't detected, but what happens if you turn off the laptop and let the AC/DC adapter plugged in for 24 hours? After that, it should be possible to work on the minute of the battery for 1 hour or more.

  If this isn't the case, it seems to be a hardware problem, maybe the battery doesn t work correctly and should be replaced. You should contact the retailer where you bought

  By the way: some nice and interesting tips on battery:
  http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

• Battery not detected after Windows update

  Hello

  I own a HP Pavilion G series laptop and I have windows running on it 8.1. Windows just made me finish an update, after which it is not detecing my battery more. Initially, he says: "trendy but no charging current. That's why I shut down the computer, removed the battery and plugged in. Now, he said only: "no battery is detected.

  I should mention that I do not use the original supplied with the laptop battery. It's a long battery life that worked well until the update. Please note that I am not too good with computers.

  I appreciate any kind of help in this situation. In addition, please let me know if any other information is needed to help out me.

  Thank you

  Edit: Now, sound to pass the message between: "no battery is detected" and "trendy but no charging current.

  That of Emad,

  Welcome to the HP Forum.

  The updated patch is maybe not able to detect "non standard" battery you are using.

  You could try to use a Restore Point and affecting the system to a date before the update was installed.  In this way, the offending update will be deleted from your computer.

  Using Microsoft System Restore (Windows 8)

  Contrary to belief, you have a choice on the installation of the updates.   Windows cannot make you install updates on your computer.

  You can set Windows updates notification, so you can decide what updates are valid for your situation.  Many people choose this course as one that fits, even if it forces you to do a little more work.

  If you set the Windows updates to be notified

  • and you always create a Restore Point before you choose to install updates
  • and ONLY install you the important updates (never optional updates)
  • and you've read about the updates that you have any concerns at all
  • then, you may find that you have less long-term problems
  • Create a Restore Point create a restore - Win7 Point OR create a restore point Win8

  Click on the thumbs-up Kudos to say 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Battery not detected after upgrading Windows 10

  Improved my Aspire 5738 of Win 7 to 10 to win. After upgrade, no battery is detected by the laptop. I like to win 10, but if no solution is found, I'll neeed to roll back to Win 7 fast enough, or I'll be stuck with a laptop that is always running in an office environment.

  I tried the old standbys (unplugging everything, release the power button, then restart, then adding back battery), but does not work. Someone at - it any other ideas / suggestions /directions?

  Thank you!

  Please check if you can make a battery driver reset. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. +++ If I have been helpful, a KUDOS is to enjoy and don't forget to mark "Accept it as the Solution", the post that solved your problem. Thank you.

• Equium A300D - 16 c. do not start after his stop.

  Please, it is a problem that I seem to not understand. I used my laptop Equium A300d - 16 c with no problems for over a year until last night. I was installing a software (nokia PC suite) that you are prompted to restart the computer. the closure was normal and so he could restart, was a problem. It displays nothing but a screen empty. It is obvious it does not start as when I press the power button it goes immediately. Only the power led is on. Another thing I notice is that the DVD-ROM reads any disk placed inside, but there is no display of any kind.

  My first reaction was that it may be overheating, so I cleaned the vents and amazed the dust of all compartments. but the problem still persists. Please, I want to know what may be the problem before you take it for repairs. Need help. Thank you.

  Post edited by: Tobyjoe_2

  Hello

  It is not easy to explain exactly why this happens, but I would like to know if you see something on the screen when you turn on your laptop.
  See Toshiba welcome screen?
  You can enter the BIOS settings?

• Satellite A500 - 18Q - battery not detected after installing Windows

  I have Satelite A500 - 18Q (PSAR3E) and Windows 7 32 bit

  Windows is not detected battery. What should I install to the Windows recordnize the battery?

  Hi marnin,.

  Have you installed Windows Toshiba Recovery disk or normal drive of Microsoft?

  Normally for the battery you n t need an additional driver. He will be recognized automatically.

  Can you charge the battery when the laptop is turned off?

• battery not detected after flashing the BIOS

  first time here, need help! I have HP dv4 1030ee with Vista Home Premium. 2 days ago I noticed that my battery is always on 3% of AC power is connected and supported. I'm looking for how to fix the situation and found that there is a new update of the BIOS available on the HP website on this issue. So, I downloaded the program and flashed my BIOS. Flashing went well, but when I rebooted, the OS can't detect my Batttery! So far, my computer works on the current! My Bios version was F.06 and I have updated with the latest F.24. Somewhere, something was not... need help... my HP laptop is only 2 MONTHS OLD!

  HP PAVILION dv4 1030ee, Vista Home Premium SP2, Intel Centrino 2 P7350, 2.0 GHz, 2 GB of RAM, NVIDIA GeForce 9200 M GS 256 MB

  Try removing the battery and starting only with power cord. Next stop then reinsert the battery.

• Upgrade of Windows 10 - battery not detected

  Upgrade Windows 10 has left me with battery not detected laptop Aspire 5738. Already tried the reset of the coercive power, no luck. If I can't find a solution, I need to roll back to Windows 7 or be stuck with a portable desktop computer. Any ideas or suggestions?

  Thanks to Alfin72 in the Windows 10 forum for a solution that worked:

  'Please check if you can do a reset of the battery driver. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. »

  The solution worked great!

  I also ended up making a coercive power, then reset because it is now detected the battery but did not load. To do this, simply unplug everything (including the battery), power for 15 seconds button (you won't see anything happen), then reconnect and restart. After that windows will appear, give it another 30 seconds, then put battery back in. Now, it's all good!

• Toshiba A300 PSAGCE battery not detected

  Hello everyone.

  I have a Toshiba Satellite A300 (PSAGCE) which worked well since I. Recently, he showed "battery not charging". I went to see what I could do and someone advised that I should update the BIOS. So, I went to the website of Toshiba and downloaded the update for my BIOS. I have install without problem. He now has the version 2.20. The problem of "battery not charging" had disappeared.

  I had a new problem: battery not detected!

  The battery worked well and he gave me 2 hours of normal use. Now, it is not "detected". I did everything I could think of. Do you have the BIOS reset (pressing on the WE / OFF button / stop for 30 seconds), I left it with the battery for a few days, etc...

  When I connect the battery, it shows an orange light for 5 seconds and he died later. I don't know what more I can do. I contacted Toshiba in my country without success. They have not yet responded to my email.

  Any ideas? I tried with another charger than computer shows the same.

  I have install as a program of "batterycare.net" and it shows that I have 1.40 hours of battery, but as soon as I remove the cable ca, the computer shuts down without power.

  I guess I won't be needing help... I flashed my BIOS with a lower version that I had (2.20 > 1.80) and now it does not start even upward.

  I'm kidding not things for good.

  Any changes to save it?

• Second monitor is not detected after upgrade to Windows 10

  After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

  I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

• B50-30 AIO - SD card reader not detected after upgrading Windows 10. Solved.

  AIO B50-30 (F0AU002US) SD card reader was not detected after that I upgraded to Windows 10. I have installed all the appropriate drivers found on the page for assistance with on Lenovo a fix. Device PCI Device Manager had no driver.

  I installed the driver below and my problem has been fixed.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  I hope this helps someone else?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity

  Thank you for the help with the Forum. I find the help I need with my new Lenovo.

• battery not charged after the power failure

  I have a HP ENVY 14-2050ed Beats Edition Notebook PC

  I was a shortage in the supply cable which caused my HP down.

  After restarting the battery wasn't in charge more. The laptop works fine when it is connected to the (new) cable, but battery does not charge and the laptop does not start with a charged battery.

  I ran all the steps at http://support.hp.com/us-en/document/c00259897 , but he has not found the cause of the problem.

  What type of repair is required to fix this problem?

  Can you recommend a repair center in the Netherlands, or near Rotterdam?

  Thnx

  Onno

  Hello

  I replied to the other thread on this topic:
  http://h30434.www3.HP.com/T5/notebook-hardware/battery-not-charged-after-power-shortage/m-p/4257042

  Thank you

• Windows7 HP Pavilion dv6 Notebook PC - battery not detected

  Hello

  I just bought a new battery, precedent is 4 + years.  During the installation of the battery in my status bar icon indicates it AC is powered, but the battery has a red cross on it.   When I hover over the icon it tells me "battery not detected."   I tried everything that the HP article for 'battery not detected' I found, but the recovery of the system.

  What are my options now?

  Robyn

  Problem solved... returned to the seller.

• Satellite A300d - new battery not detected

  I recently had a new battery PA3533U-1B SR / regarding my age Satellite a 300 d.
  When I put the new battery in the laptop, unplugged computer, press the power button, the Red battery light blinks several times, no power.

  When I plug the power to the laptop, the red light on the battery remains red as-if the load, once windows has loaded the battery shows as not detected.

  I have checked the connection and passed through Device Manager-uninstall/install, but came with no luck. It is the 3rd replacement battery, I had this company who have a very positive opinion. Is it my laptop or battery?

  I have a good battery minutes 20 faithful who recognizes all time and expenses without problem.
  If you could please help it would actually prevent me from going crazy, thanks in advance :)

  Hello

  I recommend you to keep the charge of the battery for a longer period if the time
  The battery is working correctly? I mean the laptop can charge the battery and no flashing red led is visible. Right? Well, it means that this laptop is OK!

  In such cases, it s battery related question keep the battery in a few hours or maybe day this helps if not, then I recommend you to get in touch with the retailer and ask another battery

• Re: battery not detected

  computer: hp pavilion g6

  Windows 7 32 bit

  My computer does not detect the battery.  I tried new batteries and batteries, I did the hard reset, I can't update the BIOS because I did find an update for this machine.  I made sure there is no dirt in the pins.  I have reset the BIOS default settings.  What is NOW?

  A lot of people, here's the deal.  It seems that a few screws have been protruding too far way from the holes in the battery compartment, preventing the connection of the battery.  Now, for a time after this discovery, the stack would be detected only part-time.  I think that it was a function of transport the computer and possibly have enough play in the compartment and then do not establish a connection.  The end, and to this day, the battery works as it should.  I'm still not sure why he only worked part-time for a while after the screw problem was initially discovered.

  Yes, we took the computer part to solve another problem. an overheating problem.  I put 'Arctic 5' compound on some components and blow up the computer outside air to a vacuum cleaner.  To this day the computer stopped not because of the heat.

  Yes, I know, the warranty is voided.  Well, the warranty was long since gone in the first place.  It's probably why I couldn't find an update of the BIOS of the computer.