Equium A60-157: black and white TV picture

Similar Questions

• Satellite A60-302: black and white photo on TV

  Help

  I have connected my Satellite A60-302 to my TV using brand also SCART S-VIDEO AND TWIN PHONO LICENSE that I bought from maplins. Transfers of image and sound on TV when I press Fn + F5 buttons but the image is in black and white, the sound is ok.

  I tried the color on the tv settings but it makes no difference, any help would be appreciated

  Hello

  The color on the TV settings won't help. Check please the port on your TV settings. As far as I know by the use of the pot from S-video to TV, it must be enabled properly to get the color. I put t know exactly how it works with cable SCART, but check out several channels if you should enable the option of scanning on your TV.

  I also hope that you bought the product of high quality.

• When I try to print in black and white, my picture is flooded with blue ink

  Hello! I made sure that all print settings were correct. I did a cleanup of the heads and made sure that the inks were all full. I put six by four inches of the printer and used hp advanced photo paper. I put the gray-scale printing, as there is no settings for black and white.

  When the picture came through, he started to gray scale and further to the bottom of the image has been flooded with blue ink. I have an all in one printer fax C309 series. can someone help me please?

  It seems that the print head may have a problem. Lets go to the printing preferences for the printer (these can already be defined this way if yes let us know). In this window on the left column of the impression of the shortcuts can choose Fast/economic and set printing in grayscale on the right of "Black ink" only If your setting has been set to high quality try again to print. If you were already set to "Black ink" only under the grayscale option the printer may require repair.

• Equium A80 - black and white when you connect TV PAL

  I know that this seems to be a common problem but I searched this forum and it seems that the soloution must choose PAL or a 50 Hz screen refresh rate.
  My satellite a80 has no option for PAL and only screen refresh rate is 60 Hz.

  Can anyone help? Please, I beg you!

  Hello

  I guess you have connected the laptop with TV and now the pictures on TV are black and white. I think it s not a hardware fault, and also not a matter of 60 Hz the display settings.
  How to connect the laptop with TV?
  Some TV units have the option to turn on the S-VHS. If your TV doesn't support that you can use a Cinch cable to connect the laptop to the TV.

  Also check these postings:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=291&MessageID=681#681
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9000&MessageID=31421#31421

• Just black and white picture on television when connecting my A100 Sat

  I plug in my TV (it's an old model) to my laptop (satellite a100-529) and everything is perfect, but the picture on the TV have no color.
  Where is the problem and how can I solve it?

  Hello

  Please use the advanced search on this forum and enter the black and white as search terms. You will find an abundance of subjects with the same content.

  Good bye

• My HP photosmart 6510e all-in-one scanning pictures in black and white but the docs are still in color.

  Scan pictures into my a6683w HP Vista in black and white, but the documents still scan in color.

  Hello there ingridt, welcome to the Forums!

  I noticed your post on the scans of your Photosmart 6510, scan to your system from Vista in black and white. I want to offer my suggestions to you to see if they can help you with this.

  First of all, try to launch the HP print and Scan Doctor who is used to fix the printing and scanning problems. You choose the option "Scanning" when the tool is run. It will inform you if the software is completely installed, or if there is a problem, it can not correct. If it detects an error and shows you a red 'X', I suggest then uninstall and reinstall.

  Here are some links to help with uninstalling and reinstalling if you happen to do these steps.

  1. uninstalling the printer software

  2. restart your PC

  3 reinstall: Photosmart HP 6510 e-All-in-One Printer - B211a

  Try a scan now and let me know how make you out!

  Good luck!

• Equium A60-157 (PSA67E) - need recovery disk and AC adapter

  Can Hi anyone help me please? I get an old work Equium A60-157, sorted to the backlight inverter but I would like to get a drive recovery if possible because it can have several system files on this subject I found on this site.

  Certainly wants power! must get a more powerful adapter, as it is creaming my 4. 5 diet sometimes, but seems to be a good laptop.

  Thank you very much David

  Hello

  > to get an if possible recovery disk

  Click here for [recovery disk | https://backupmedia.toshiba.eu/landing.aspx] if it is available to order

• Equium A110: SVID to Composit - output black and white

  I recently bought a Toshiba Satellite A110 and I tried to put it out to a TV
  the problem is that svid to svid is fine and colour however svid to composit (which is what I need) is black and white, I tried all the settings without result, I think it has something to do with the settings of the tv are on 60 Hz in properties but I can't change the
  I downloaded the latest drivers 945GM, who has not remedied the problem someone at - it ideas of what to try next.

  Can you please tell what cable do you use? Maybe a 4-prong cable?
  I read on some sites that a cheap 4 pin cables could be a reason for a black and white TV. Try a 7 wire pins. Maybe it helps.

  But as a first step, you should also check the PAL/NTSC settings.
  You should also check this site on different connections
  http://www.michaeldvd.com.au/articles/VideoConnectors/VideoConnectors.asp

  PS: I n t think 60 Hz setting is responsible for the black and white problem.

• Satellite A100 - 294 PSAA8E: black and white TV without sound picture

  Dear all,
  When I select the TV mode, my TV shows black and white color without noise.
  WHY?

  I have:
  Satellite A100-294
  Part number: PSAA8E-02T014GR

  I check the cable to use it in my CAM.

  Hello

  I assume that you have chosen the wrong settings of PAL/NTSC.

  Please check if you are using the right settings that correspond with your country where you live.

• Why my pictures become black and white on my screensaver?

  When my screensaver comes on, my personal photos appear.  After about 5 minutes, they become black

  and white, as they begin to color.  Why is this happening?

  Return to your screen saver options (by right-clicking on the desktop and choose personalize, then the screensaver below right.) Once there, click on the settings button.  See if your screen saver has an option 'theme '.  One of them is probably 'Black and White', and you have probably chosen the random theme, which means the black and white theme will appear later every few minutes.

• Hi is possible to turn black and white negatives I have copied my bellows on the camera for pictures of positives on Lightroom If Yes, how can I do?

  Hi everyone I copied a bunch of black and white negative using my bellows on the camera and I was wondering if it is possible to convert these negative images in positive photos in Lightroom? If yes how are you?

  Please see this video working with negatives in Lightroom - YouTube and let us know if this helps.

  Kind regards

  Assani

• My black and white pictures turn into color when I open them in photoshop.

  When I open my black and white images that are saved on my computer in photoshop, they turn into color stills.

  The footage was shot on Sony a7s raw format.

  In Camera Raw, click LGV / tab grayscale and check convert to grayscale.

  It will open with a mixture of default, but you can change the brightness of the colors according to your preferences.

  When you are finished, click on open, allowing you to save a new version of the image in a non - raw, tiff, psd or jpg format.

  

• When I put a picture, it appears automatically in black and white

  I normally work with images when I draw as a reference, but all of a sudden when I put them in the archive, they appear in black and white without me selecting so.

  Any help will be welcome

  When you open a new file, check that the color Mode is set to RGB color

  On an existing file, choose Image > Mode > RGB color

• Scrolling with the mouse on the pages to create black and white, lines

  When scrolling with the mouse, periodically the entire screen turns into black and white lines. Page sometimes together, sometimes just from ads pictures/side. If you continue to scroll disappear but you need to scroll to where the lines have begun, it's hard to explain, I took 1 picture of the problem but will have more photos that I can, I love how Firefox works on my computer, it has always been the best browser for my needs. I recently bought a new desktop computer, but he did so also, so I deleted and tried to launch the Explorer and Google and I don't like, so I hope that we can settle this problem.

  I don't know if it solved the problem, but he didn't precisely these days. Thank you

• Drive recovery for Equium A60-157 PSA67E

  Has anyone got a copy of the disc recovery issued with an equium A60-157 PSA67E as I am trying to get this laptop for work and unable to get its hotkeys control and be able to work.

  I think I've worn out my wellcome with Equium forum and technical appeal but it's somewhere I myself lack of understanding on this subject.

  I loaded all recent downloads listed on their site, but always impossible to get these functions to work.

  So can you help me please...

  David

  Hello

  Why you n t install a new Windows OS on this laptop?
  Missing drivers can be downloaded from the page of European driver of Toshiba.
  All drivers are available!

  The recovery disc can be ordered for this model of laptop because it s too old.
  Clean install OS Win + drivers is therefore the only option