Equium A60-181: Win XP does not start successfully - the BSOD reboot
I have an Equium A60-181 which has an operating system problem.
Loads of XP logo at the beginning, when it happens to show the log on screen, it is a quick blue screen of death error, and it restarts.
I tried to go into safe mode, but it blocks on atisgkaf.sys.
Is that what I can do to save the operating system?
How can I start to diagnose if it's a hardware problem?
Thank you, Lawrence
The atisgkaf.sys file belongs to the graphics card driver.
But as Akuma has proposed, the Windows operating system does not load 3rd party in safe mode drivers.
This is why the ATI graphics card driver should not affect the start-up procedure.
However, this is only my personal hypothesis and believe me; nothing is impossible, so a hardware problem might be possible.
But just a question;
Have you tried to reinstall the OS?
The installation process goes smoothly through the unique installation steps?
I think that the new installation of the operating system is a good idea to find out if it is a hardware or software problem.
Maybe you should try it
As the header says, Windows 7 does not start. Made a partition to swap files between OS X and Windows 7.
I saw in a thread that it could be repaired using fdisk. I'm really new to OS X, so I did not really
know what to do. Writing the result of the controls, I found in the thread.
I know now there is a warning to the partition AFTER installing Windows.
Would really appreciate if everyone took some time telling me what to do!
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 500,1 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage MacBook Hoveddisk 382,5 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft database FILDELING 16.6 GB disk0s4
5: Microsoft Windows HD 100.0 GB disk0s5 data base
/ dev/disk1 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD GB + 382,2 disk1
Logical volume on disk0s2
Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]
#: cyl hd s - cyl hd s id [Start - size]
1: EA 1023 254 63 - 1023 254 63 [1-409639]
2: AC 1023 254 63 - 1023 254 63 [409640-747116216]
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [747525856-1269536]
4: 0 b 1023 254 63-1023 254 63 [748795392-32403968] Win95 FAT-32
TPG - v - r see the/dev/disk0
See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168
See the TPG: / dev/disk0: MBR suspicious to sector 0
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 747116216 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
747525856 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
748795392 32403968 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
781461504 195311616 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773135 32 table dry GPT
976773167 1 dry GPT header
Please after the release of
sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C
You see the Windows files in the volume of training using the Finder?
So last night, I was using my Toshiba Satellite laptop.
I know a lot of details because I'm not very good with laptops. Here is where the problems start.
So after I finished I stopped him.
The next morning I wake up, he would not start windows.
I am currently using windows 7. Anyway, he tells me to stop. I start again, and then it gives me only 2 options: Startup Repair or run windows normally.
When I try run windows normally it says "starting windows", but it never starts.
Then when I try the startup repair it will attempt to repair and I do for 8 hours and no luck. It is said a recent move of hardware or software can have him cause. But I got nothing except the charger is connected.
I REALLY WANT TO USE MY LAPTOP D:
CAN SOMEONE HELP ME PLEASE? !!
> I am currently using windows 7. Anyway, he tells me to stop. I start again, and then it gives me only 2 options: Startup Repair or run windows normally. When I try run windows normally it says "starting windows", but it never starts.
It seems that the Windows operating system was messed up I m not very well why, but these things that happens simply
However, you can try to recover the laptop using the recovery of HARD drive option. But it will not work, if you didn t format the HARD drive and didn't delete the partition of HARD drive recovery.
So try to power the device, press F8, choose repair my computer, then choose recovery Toshiba.
Notes; This reformatted the system partition currently which means that you lose the files on the C partition.
I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hardsrive must be clean first. The disc does not start on the existing XP. How can I do this?
I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hard disk must be clean first. The disc does not start on the existing XP. How can I do this?
Have you changed the boot order?
You need to change the Boot order to make the DVD/CD drive 1st in the boot order and boot from the Windows 7 DVD:
How to change the Boot order in BIOS:
Do install a cleaning, removal of the existing XP partition and create a new partition to install 7 on in the own installation process:
See you soon.
Hi, I need BIG help here please!... I wanted to do a fresh install of Win XP Pro, but my PC didn't boot from the XP CD... I changed the BIOS settings, the sequence start on CD, restart my PC and he kept boot from the HARD drive and the PC does not recognize that there is a CD-ROM drive. Once the start-up of the PC from the CD, I wanted to delete the partition and format the HARD drive, but it says "Setup could not format the partition...". "something like that... so what I did I have the PC from the boot CD, click in the command line and 'R' for repair, I wrote"format c:"and after that, I wrote" diskpart remove C:' so I deleted the old partition, create a new and when I wanted to install XP on it, I could not because the PC does not start from the CD... how can solve this? "
Thank you!original title: HELP for the installation of Win XP.
So the only thing I can think is that it is a sort of master/slave thing.
Your IDE HDD will be a Knight, probably alongside where the power cable is inserted, to dictate whether the player will be considered to be a master, slave, or cable select. Assuming that it is the only HARD drive in the PC, make sure it is designated "master". Then, in the BIOS, make sure that the boot order is specified as HDD0 first (as opposed to HDDx where x is greater than zero).
In addition, assuming that the data cable is the new type of Ribbon with strands of 80, make sure that the blue connector of the IDE data cable is in the motherboard and that the end of the black connector is in the HARD disk and, if it is a two-disc data cable, do not use the gray connector.
iTunes does not start after the upgrade. "The"itunes"folder resides on a locked disk or you do not write to this folder permissions. I am the administrator. Windows 7 Professional.
See the empty/corrupted after upgrade/crash iTunes library. This particular issue is addressed towards the end.
Computer does not start and the fans work hard and fast. Someone has an idea what is the problem and how can I solve this problem?
OLA I will try help EU tenho um macbook pro, mas esse problema não me it happened ainda EU acho seria o seu mac origem help esse problema pode formatar better.
SE nao tem'm ligar o seu osx para formatar use cmd + r e ligar pressionar cmd + r ele deve AI PODES ligar restore o seu novo osx.
Two iMacs does not start after the 10.11.4 update. Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd. He then gets stuck in a loop trying to start. Tried to reset the SMC and LANDAU. Without success. Started in recovery mode and ran disk utility. Discs said OK. Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).) Installation is finished but still once does not start. Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater. Installation seems to work, but once again, the macs will not start. Same 'unexpected launchd sigkill' error. A mac is now back working properly with 10.11.3 the other will be shortly. Is there a problem with the accession? Our COMPUTER support use Munki to get updates from one day to the next. Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.
More information: two bricks iMacs were late 2013 models. A 21 "and a 27. We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.
ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 184.108.40.206, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).
Solution, according to this link, is:
If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Ok. Trying to fix a friend's computer and seem to have met a strange barrier.
Problem: The computer does not start after the bios screen.
Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well. And that's it as far as the computer becomes. After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect. I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point. I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected. Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success. I tried using a different memory stick and different memory as well... Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).
The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.
http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.
I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.
I have a pretty strong understanding of computer repair, so feel free to give me something to try.
If you need more information out of me, let me know as well.
Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.
At the back of the pc is the condition of the PSU led green or flashing?
L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.
So my questions are:
1. He's probably right?
2. is it a common problem with an easy solution?
3. what else can do before shelling out for a new Board of Directors?
4. is there a link where I can find how to disassemble the case?
Any help appreciated
> 1. He's probably right?
Yes, it looks like motherboard failure
> 2. Is this a common problem with an easy solution?
If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...
> 3. What else can do before shelling out for a new Board of Directors?
I don't think you can do anything with fried mobo
> 4. Is there a link where I can find how to disassemble the case?
Take a look at the site called irisvista.com
My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk. After removing the drive, the computer starts. I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?
Thanks for the info. I added the GPT to my search and discovered what had to be done in disk management. Here is a page with step by step instructions and photos. http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/
A few weeks ago, I turned on my PC and it showed at the Compaq screen and then went to a blank screen & would not respond. I held the switch button to turn it off and after 4 attempts, it start fine. Next time, it took 20 attempts to initialize and now it does not start, it will be maybe if I try like 100 times he can do... The problem is when the Compaq screen comes up it comes only for like a second so I know that it does not start, if the Compaq screen stays for a few seconds as 3 + I know it will load windows and start.
History > the computer originally had XP and has been replaced with VISTA memory was 2 * 512MB, but it was a bit slow and I was advised to upgrade. I bought 2 * 1 GB memory and put it in my PC a few months there may be 5 + had no problem so far.
I tried the following:
Remove the memory and replace it. Remove the 2 * 1 GB of memory and its replacement by the Moose 2 * 512MB to check if the memory is at fault.
Cleaning of the dust around the fan (at this point, I removed the fan over the CPU and cleaned the thermal compound from the CPU to make it nice and shiny, only tried to start one time after that for a few seconds heard blowing fan and turend it took off. Depuis_lors, I realized that it wasn't just muck and had a purpose na derwiche put a little more on)
Remove the battery of the BIOS for half a day
Move jumpers CMOS from1, 2 to 2, 3 positions
I can not get into the same if BIOS start and hold F1 he will show me the BIOS for a second and then go to a black screen.
Specifications of the computer
Compaq Presario SR1629UK desktop PC
Details can be found in the following link
Your help would me much appreciated...
Thanks for your help, I wanted to just give you a batch update. After the grueling process of verifying the destop, memory suppression, cleaning it & all the other techo checks. I gave my pc to somone to look to the he tried not to turn on he opened it removed cleaning my thermal paste back on and told me it was working fine.
When I bought home all happy, I realized that I had the same problem, I borrowed another monitor and found it worked well! So the question is with my monitor, if anyone has the same problem first check another monitor.
My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?
The file is missing or corrupt is one of your files in the system registry.
By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
Hirens CD burning <> http://www.hirensbootcd.org/burning/ >
Once you create the CD, and then start your system of problem with this CD. In the first window, select "Mini Windows XP" and wait for the system to start. When it starts, go to the Hirens Boot CD menu and select
Register-> Registry Restore Wizard.
then follow the prompts. This wizard will return a copy of your registry database from backups that are stored with your system restore points. After the restoration, stop, remove the CD and restart.
When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
"How to restore Windows XP to a previous state"
Also, this error is almost always accompanied, if not caused, the corruption of the file system. Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
"How to perform disk error in Windows XP check"
The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)
"How do I recover from a corrupted registry that prevents Windows XP boot"
I have a 3200 HP with XP Home Edition. Windows starts only in Mode safe when I download Service Pack 3. Is there a way to fix this without doing a complete restore of the system. I've been running without SP3 because I knew of this issue. Recently, it has been downloaded and now Windows does not start successfully. Only in Safe Mode. When I discovered this problem, I was able to fix it, but can't remember if it was fixed without doing a complete restore of the system and starting over.
Maybe you are looking for
your mailbox is full... How can I make space inside?
My Satellite P300 keeps freezing when I am watching videos.Can't even watch you tube gently or activity without intermittent freezing. Any help on this?
Hi all I am currently using TestStand 2010, and I got the following problem is driving me crazy: every time I open my sequence with the "TestStand sequence editor" and not through my code, I am able to communicate through series with my camera to the
I use a new HP Touchsmart laptop, running Windows 8.1. I installed an old program, Coreldraw 7, but whenever I try to enter data, the Windows Help and Support window opens and prevents data entry. How can I prevent the opening of this window?
Lenovo ThinkPad Edge E520 11433BU, liquidated suddenly down and refused to start. Fixed (replaced DC-IN sub map), but I see an unknown device in the device manage: AIKB7SJQ IDE controller. Properties tab says: Device type: storage controllers Manufac