Equium A60-191: 'request could not be performed because of an i/o device error. "
I have an Equium A60-191 my dvd drive has stopped working, the led on this subject is on all the time like his who seek constantly.
It does not read the CD or dvd and gives an error "REQUEST COULD NOT BE PERFORMED DUE TO A DEVICE IO ERROR.
I tried to remove and reinstall the drive from the Device Manager, it doesn't help. I also tried to boot from the drive computer, but does not start, so I think that the drive does not work.
I also noticed that the motor does not work in the reader, because that drives don't spin. Device Manager indicates that the drive works properly. Anyone know what is this error?
1. click on start
2. right click on my computer
3. Select manage from the menu that appears
4. in the computer management window, select Device Manager
5. in the right pane, click to expand IDE ATA/ATAPI controllers
6 identify your CD/DVD drive in the menu expanded and right click on the appropriate drive
7. Select Properties
8. in the Properties window, click the Advanced Settings tab
9. in the Transfer Mode box that represents your CD/DVD drive (typically device 1), open the menu drop down and select PIO only
10. click OK and exit all windows.
If this does not solve your problem, then you need to go back using the procedure above and change device 1 to #9 step will support to 'DMA if available '. Then, change the device 0 to "PIO" only in the Transfer Mode box.
Device 0: Primary IDE Channel
Unit 1: Secondary IDE Channel
Of course, he could also be dead DVD player. In this case, a new drive should solve the problem.
Tags: Toshiba
Similar Questions
-
When copying the files, I get this error which is lower thanan unexpected error prevents the operation.make a note of this error code, which might be useful if you get additional help to resolve this problem:error 0 * 8007045D: the request could not be performed because of an i/o device errorfilename DSc02828file type jpgsize 3.27 mbupdated the 09.11.2012try to jump again cancelWhats wrong here
Hello
Thanks for posting in the Microsoft community!
You have reached the right forum for your question.1. don't you make changes on the computer before the show?
2. where exactly you are trying to copy the file?Run check disk on the computer.a. click Start , and then typecmd.exe in the start search and then press ENTER.b. right-click on cmd.exe and clickrun as administrator.(c) in the command prompt, type the following command and press ENTER.Chkdsk /fNote: You may be prompted by a yes / no question. TypeYes and press ENTER.d. restart the computer so that the disk check starts. It will take about half an hour to complete the process of error checking. Do not restart the computer when the current disk check.Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Summary the link:Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
http://support.Microsoft.com/kb/952272Just reply with the results. I'd be happy to help you further. -
Original title: Outlook backup problem
I support my computer using an external hard drive. "It does not backup Outlook, declaring: the request could not be performed because of an i/o device error. (0x8007045D). What should I do?
Hello
1. How did you perform the backup? He used the Windows backup and restore functionality?
2. you have any third-party backup software installed on your computer?
3. have you done any software or hardware changes on your computer before this problem?
To work on the issue, check the following link.
Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
http://support.Microsoft.com/kb/952272CHKDSK warning:Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.See also:Back up your filesHope the information is useful. -
Hello world. IM new here.
I would like to ask questions about the allocation of diskMy drive HARD Ext (WD my passport) will not appear. so, I check in computer management, and my disk not allocated
When I try to assigned by the following method
It is said: the request could not be performed because of an i/o device errorPlease... is if everyone there a solution to this issue?
I tried to update the firmware, WD Essential, WD utilities
but this does not solve the problem...
When I try to checkdisk in promptcomand but I don't know how to put it, because the drive isn't there...Please help me...
Hello
This error may be coming because of unavailable storage required for the motherboard drivers. You can follow the steps one by one, mentioned below and check if that helps.
Method 1: Uninstall, and then reconnect the external hard drive. This method solves the problems where the currently loaded USB driver has become corrupt or unstable.
- Click Start, type Device Manager in the box Search
- Click Device Manager in the returned list.
- Click disk drives in the list of hardware
- Right click on the USB external hard drive with the question and click Uninstall.
- Once the hard drive is uninstalled, disconnect the USB cable.
- Wait 1 minute and then reconnect the USB cable. The driver should load automatically
- Look for the USB key in Windows Explorer
Note: Connection of your USB external hard drive to a non powered USB hub can cause a lack of sufficient power to operate the external drive. Instead, plug it directly into your computer.
Method 2: Install the latest Windows updates.
This method will install the latest drivers for your external hard drive USB device.
- Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
- Click find updates. When the scan finished, click optional review updates.
- Click the check box next to the update, and then click install updates.
- If you are prompted, read the license agreement, then click I agree.
- Follow the instructions on the screen to download and install updates.
- If you are prompted, restart your computer.
If your problem still exists, go to method 3.
Method 3: Reinstall the USB controllers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
- Click Start, type device in the area Manager Search , and then click Device Manager.
- Expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
- When finished, restart your computer. Your USB controllers will automatically install.
If your problem persists, go to method 4.
Method 4: Disable USB selective suspend framework. This method prevents your power off USB external drive.
- Click the Start button, type power management in the search box, and then click choose a power plan.
- Next to your currently selected plan, click Change Plan settings.
- Click change advanced power settings.
- Click in the box USBsettings, and then expand the USB selective suspend settings.
- Click on the area, and then click the menu drop down and select disabled.
- If you use a laptop, click the cell, and then click the menu drop down and select disabled.
- Click apply, and then click OK.
If this does not resolve your issue, go to method 5.
Method 5: Install the latest drivers for your motherboard chipset. This method updates the chipset of your motherboard drivers, so that your computer will use your external USB hard drive.
- See the documentation for your computer that will contain the name of the manufacturer of the motherboard.
- Visit your computer manufacturer's support Web site. For a list of the computer manufacturers support sites, visit: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers
(http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers)
- Go to their Web site to find the appropriate drivers for your motherboard. For assistance, contact the manufacturer of your computer.
Please post with the State of the question.
-
Original title: Windows I/O device error?
Hi all
I'm Chinmaya and I use Windows 7 Ultimate.
I have this error message.
"Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error."whenever I try to copy songs to my PSP device. In fact, it started when I was copying a 16 GB file from a USB on my computer. One night before everything was fine. But now he's screwed. I tried several times, restore, backup start in safe mode and almost everything that has been mentioned in other responses from Microsoft. Another important thing, I was you know is
Whenever I connect my camera to the computer, my computer is not responding. All possible suggestions... Please help :)
Hello Chinmaya Sharma,
Thanks for choosing Windows and thank you for providing an opportunity to help you.
According to the description provided, looks like you have a problem with the Windows 7 error 0x8007045D error message: the request could not be performed because of an i/o device error
Perform the disk check and check.
Check a drive for errors (Windows 7)
Warning of Chkdsk.
Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.
Answer to us if you are having problems with error e/s or any other issue of Windows, and I'd be happy to help you.
Good day!
Hope this information helps.
-
When we execute SQLIOSim on a Server Windows 2003 VM hosted on an ESX 3.01 or 3.5 server, you get the following messages:
Error: 0x8007045D
Text of the error: the request could not be performed because of an i/o device error.
Description: Failed to get the info from cache drive to C:\
Anyone know what is the cause or how to solve the problem (if it is a question)?
Thank you
Had the same error and found this blog:
It will be useful.
-
Original title: I try my computer, but for some reason any that it won't let me back. and I get an error message
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: have problems with window vista home premium
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello Mipregunta,
Thanks for your quick response! I suggest that you try to visit the following article for steps on how to solve your problem:
http://support.Microsoft.com/kb/952272
Please let me know if this helps J
Adam
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I tried to backup my C folder on a hard disk extrenal and received the following message:
OT: Backup failed Windows7 0x8078002A error Code.QuoteOne of the files of backup could not be created (0x8078002A). The request could not be performed due to the i/o device error (0x8007045D).End of quoteCan someone advise me?NitinHello
Method 1
Check the shadow copy Volume service in the services window. Use the following steps to check:a. Click Start and type services.msc in the search box
b. Locate the Volume Shadow Copy service
Make sure that the startup type is automatic. Steps to set the auto services
a. Locate the service
b. right-click on the service
c. If the service is stopped and then starts the service
d. Select Properties
e. and in startup type, select automatic
Method 2
Try the steps listed in the link below: error message when you try to perform a full backup on a Windows Vista-based computer: "the request cannot be performed because of an i/o device error":http://support.microsoft.com/kb/952272 (for Windows 7)Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
-
0x8007045D error: the request cannot be performed because of an i/o device error
I brought a new seagate hard drive I tried windows backup to the windows image. But I got error 0x8007045D error: the request could not be performed because of an i/o device error. I tried safe mode and clean boot state, but nothing works. I'm not able to access backup windows in safe mode. In the State of clean boot, I get the same error
Hello
Welcome to the Microsoft community.
It seems that you are unable to run the Windows backup utility on the new external hard drive. It would be great if you can answer the following questions:
1 have had any changes made on the computer before the show?
2 are you able to access the external hard drive? If it is detected by the computer?
To resolve this problem, I suggest to refer to article and follow these steps:
Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
http://support.Microsoft.com/kb/952272
The article also applies to the Windows 7 operating system.
Note: when running chkdsk on the drive hard if bad sectors are found, it tries to repair this sector and if all the available data may be lost.
If you are always faced with the question, please answer and we will be happy to help you.
Thank you.
-
Dear Experts,
I am facing this error in the table of 500G on win 2008 R2 64 bit RAM
Nothing in alert log or v$ recover_file
Oracle Database 11g 11.2.0.1.0 - 64bit SQL> create index L_3__SERIALIZED on L_3_PV_TD_LINE_ITEMS_FF_REL_2 (SERIALIZ ED) parallel 16 nologging; create index L_3__SERIALIZED on L_3_PV_TD_LINE_ITEMS_FF_REL_2 (SERIALIZED) parallel 16 nologging * ERROR at line 1: ORA-12801: error signaled in parallel query server P015 ORA-01115: IO error reading block from file 115 (block # 967936) ORA-27070: async read/write failed OSD-04016: Error queuing an asynchronous I/O request. O/S-Error: (OS 1117) The request could not be performed because of an I/O
-
When I try to create or convert a PDF file in Acrobat DC I get the error "your request could not be performed. Adobe Acrobat DC license has expired or not been activated. "This happens even if Acrobat is installed via a package of the Customization Wizard of the product which takes care of activation and the license is not expired. What could be the cause of the issue?
Uninstall your creative cloud application that basically allows you to download apps and redownload it. This should do the job. Your system just lost you license update.
-
I have a subscription monthly-pay to specific Adobe through creative cloud. All of a sudden to create Adobe PDF back "your request could not be performed. Adobe Acrobat license has expired or not been activated. »
Are you referring to Adobe Acrobat? If so, please take a look at this link and see if it helps:
Acrobat license expired trial or renew the expired subscription
Guinot
-
The request cannot be performed because of the I/o device error when opening a USB flash drive
Original title: USB Flash Drive issues
So, I tried to open my flash drive on my Dell Inspiron 15 with Windows 8 today to make an assignment. But for some reason some it does not open. This is what appears when I try to open it. I've done many things that are supposed to solve the problem with the ports themselves, but nothing seems to work that makes me think that it is the actual flash player. I don't know what to do all that my University materials are there then I really need to work, or at least find a way to get at least most of my files. Thank you very much for the help in advance.
Sorry for the late reply Jose. I appreciate your efforts to resolve the issue.
This can occur because of one or more of the reasons below:
1. the currently loaded USB driver has become corrupt or unstable.
2. your PC requires an update for problems that could conflict with a key USB and Windows.
3. Windows may miss other problems hardware or software updates.
4. your USB controllers may have become unstable or corrupt.Check the disc on another computer flash memory to ensure that the issue is not with the device.
You can try the methods below:
Method 1: Uninstall, then reconnect the USB flash drive:
This method solves the problems where the currently loaded USB driver has become corrupt or unstable.
1. go in search for, type device manager in the search box
2. click on Device Manager in the returned list.
3. click on disk in the list of hardware drives
4. right click on the USB with the question and click on uninstall.
5. once the flash player is uninstalled, unplug it.
6. wait 1 minute and then reconnect the USB flash drive. The driver should load automatically.
7. look for the USB key in Windows ExplorerMethod 2: Reinstall the USB controllers.
This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
1. click on start, type device manager in the start search box, and then click Device Manager.
2. expand Bus USB controllers. Right click on a device, and then click on uninstall. Repeat for each device.
3. Once complete, restart your computer. Your USB controllers will automatically install.I hope this helps to solve the issue. If you still have the same problem, get back to us.
-
So I just finished my first build. All this POST-ed fine, but I can't get 8.1 Microsoft 64-bit OEM installed on my SSD.
At first I could start a custom installation and it went through fine until the first reboot. This is where it says "disc error". I tried again hoping it would go but noticed a 350 MB "System reserved" Partition with the rest of my space unallocated in my 1st attempt to install.I googled this problem and was told to remove the reserve system, so Windows could create its own partition, or something of that kind.Installation works well until you restart again, where this time it says press any key to boot from the cd drive or something of the sort so I don't hope that Windows 8 would be to continue the installation. However, he wanted to just restart the entire system again!I try once more in the hope that it would work, I remove the additional partitions created and repeat and this time I can't even begin installation due to the message in the title of this post.Since I was:-Make sure SSD has been selected for AHCI (it was already on it)
-Reconnected given SSD + cables power as well as the CD player on shutdown and reboot
-Run Diskpart to repair the boot with these commands:
-diskpart
-disk list
-select disk 0
-clean
-output
Same error code came again after attempting to reinstall. So I tried a few other commands:
-diskpart
-disk list
-select disk 0
-clean all the
at this point, he said: DiskPart has encountered an error: the request could not be performed because of an i/o device error.Someone please help!Try to create the new partition and do. for example, to verify the steps for Windows 7-
http://support.Microsoft.com/kb/2476568/en-us
Likewise, create a partition first.
-
Equium A60-191: upgrade graphic integrated processor
Hi, new,
I was wondering if I could spend my processor integrated switch to something better (anything!) I have a TOSHIBA Equium A60-191 with an ATI Mobility Radeon 7000 IGP.
Thanks (please answer)
Thanks again!
Oh and thanks again!
Suddste000Hello
as far as I know, it is not possible to update the graphics card in a laptop.
Good bye
Maybe you are looking for
-
How to exclude programs that I use rarely loading at startup and slows down the startup?
-
Connection of a Bravia HX-800 to a home theater BDV - #570 system. With the help of HDMI connections. When you use the Blu - Ray player - all right. When he was watching television (cable) can't switch all sounds home theater (sound works well on tel
-
Hello world I have format my computer and installed El Capitan. GarageBand is now gone. I tried to reinstall the application with the app Apple installation DVD, but the installation failed. It seems to be out of date (I have a 2010 MacBookPro). How
-
HP Pavilion PC Sleekbook 15: Audio lags / slow works?
First assignment in time. I had this problem for a while. My audio lag on Persia. Its a little hard for me to explain it, but I'll give you a scenerio. Loading something with audio as a game or a video, if I haven't used anything that uses the audio
-
Windows 7 64-bit incompatible with HP laserjet 1018?
Update from Vista to Windows 7 64 bit. My HP laserjet 1018 printer has worked for awhile, but no longer works. When you print, nothing happens, except that you can see in the job printer status window that the job was created, but I disappears in a s