Equium A60-199: audio and video control buttons not working not

Similar Questions

• HDMI output on Apple TV 4 sends audio and video on TV, not just audio and video for TV to a stereo receiver

  Just hooked up our new Apple TV. Excited is no longer need to use both optical HDMI cables so that everything happens [with our compatible audio receiver HDMI.] But to hook the HDMI cable to the receiver, it sends audio and video to the TV. The audio will not play back via the receiver which is very annoying. Anyone else having this problem?

  It all depends on how your receiver and the TV are connected. the general idea that underlies the HDMI, is that he send audio/video in HD quality via the same cable...

  my system is configured - Live tv on HDMI1, HDMI2 on ATV, bluray on HDMI3 and cable optical audio output to receiver - no "entry" material I look at, the audio comes through tv receiver.

  on the other hand, my father has everything connected to the receiver via HDMI, which acts as a transition to television, but he needs to change the entry on BOTH the TV and the receiver...

  How is your audio connected TV to the receiver - it cable on which exit?

• Equium A60 - 199: ITunes and Mat * a UJ - 830 s (error 4280)

  I can't burn CDs on my laptop. This has never before been a problem, but recently, no matter what type of burning software I use, I can't burn it to a cd. I am currently using ITunes version 6 and after the burning process starts my computer ejects the cd and I get error 4280.

  I read a few different posts on this on other forums that give suggests using different CD to re - install an older version of Itunes (I am currently using v6), but the most interesting seemed to come on the Hewlett-Packard support site. They suggest the cd configuration folder and edit the file gcdrtype.cfg. It was there is place for a certain type of desktop compaq presario pc and turns to advise to change a line in the story, save and reboot and voila. The problem should be solved. Since I own a Toshiba a60-199 finalis I wonder if anyone knows a fix/solution similar to the problem.

  I'm also intrigued by the following message which produces CD Itunes diagnostics when I run:

  IDE\DiskFUJITSU_MHT2040AT___00 22___, Type of ATA Bus, Bus address [0,0]
  IDE\CdRomMAT * A_DVD-RAM_UJ - 830S___1.50___, Type of ATA Bus, Bus address [0,0]
  If you have several drives on the same IDE or SCSI bus, these discs can interfere with each other.
  Some computers need an update to the ATA or IDE bus driver or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, visit the support for the manufacturer of your computer or motherboard.

  It is the root of my problem? How can I get this update?

  If anyone can guide me in the right direction to solve my problem and return me to cd burning sky, I would be very grateful.

  `

  Hello

  It is still very problematic if you use some, ion my opinion, the "exotic" software I noticed that most of the users on this forum use applications 'standards' as NERO burning ROM.

  If no one can give you an answer try to contact ITunes support and explain the situation. They have enough experience with own products. Also check if there is any FAQ page. Sorry, but I can't tell you anything that can help.

  ITunes support

• Audio and video calls do not constantly

  Impossible to make calls from the Client Desktop, even me and my friend have excellent internet connection.
  The audio call or video call taken... but we are able to discuss without fault... not why...

  But Skype for the web (beta), not a single question is coming... I am able to make calls... no problem.

  I have 10 Windows installed on my laptop and the desktop client Skype is fully updated to the latest version...

  Any successful solution would be much appreciated...
  Thank you!

  [The update by the moderator topic title should be more descriptive. [Original topic title was: "Calling"]

  Try to uninstall the virtual CyberLink YouCam video capture application.

• audio and video synchronization does not

  I recorded a video clip of an audio interview separated, and I've marked the beginning of the clip with a Clap and spoke the take number and content to make life easier, as I usually do. The craft is borrowed at school, and for some reason any audio that came out the Canon 5Dmkiii was really weak. This could be the reason why, when I set the video and audio in their own sandbox and right click and merge clips, (with the point under the audio tab by checking the box to delete the audio clip AV and as audio synchronization) that the clip does not seem to recognize the breaking of the Clap or something perhaps? Is it possible that I can fix this or should I it synchronize manually? If so, is there a quick and easy tutorial on youtube or something that is recommended?

  I discovered that if I put markers manually on the point where the Clap snaps and select marker instead of the audio as the point of synchronization, then it synchronizes to the top clips properly.

• Unlink the Audio and video in gray in the first 13 items (Windows 8.1) [new user]

  I posted (or at least I thought the post worked) this Mar.27th question, but I can not find it or that the answers I have gotten so if anyone knows his comings and goings, I would appreciate you tell me how to see while I have 2 threads running for the same question. My question is: why is the ability to separate audio and video tracks greyed when I am trying to replace the part of an audio clip (without ruining the synchronization between audio and video existing). I work with a saved file "projectX.prel". I noticed when I opened a new project that the option to break the LINK is active. This seems contrary logic is to say action to break the link would be more likely to be needed when you are working on an existing file as opposed to when you are working on a new file? How can we separate the 2 components (audio & video) so I can just edit the audio clip without the work of procedure to break the LINK? Would appreciate any help anyone can offer with the foregoing. Thank you.

  garryw

  First broadcast 13 elements 8.1 on windows 64-bit. Have you updated to the 13 to 13.1 yet? If this isn't the case, please do so using Help Menu/updates to date of an open project.

  But for the immediate question...

  I don't see any sign of a previous post you so I'm not sure what happened to your prior shipment.

  When you import a file that contains the video and audio, they come into Premiere Elements project related - party video presenting the

  Video of track 1 and the audio portion on the Audio 1 track.

  If you want to unlink the audio of the video

  a. Select/highlight the chronology of the record and go to video Menu/unlink Audio and video and click it. It does not work.

  or

  b. right click on the file of chronology, and in the drop-down menu, find and click on remove the Audio and video link.

  or

  c. hold down the ALT of the main keyboard to the computer and click drag the audio from the video.

  Please consult the bulletin and review, and then let us know the result.

  If any questions or need any clarification, do not hesitate to ask.

  Thank you.

  RTA

• M30 - buttons Mode Front and control Audio and video do not work

  Hello

  Front Mode and Audio/video control buttons do not work

  Any ideas?

  Thank you

  Hello

  As far as I know the Toshiba utility controls is responsible for the use of the key.
  Have you tried to install Toshiba controls?
  See the page of the Toshiba driver for this driver.

  Good bye

• Equium A60-199: question on the colors of the button power/powerlight

  I was wondering if someone could explain why the power button on my Equium A60-199 changed from its usual blue to a Pink/Purple mix, and also why usually green power light on the front of the laptop has changed to amber.

  Thank you.

  If the powerbutton is Pink/Purple and your amber powerlight, that means that your machine is in mode. This happens usually when the computer has been configured with a power that leaves your machine goes mode sleep after using only not in a period of time.

  Or you have vista and click on the button in the Startmenu which supposedly should stop the machine but rather switch to standby.

  That's all.

  Welcome them

• Equium A60-199 randomly shutting down - could it be overheating issue

  Hi, I am writing on behalf of a friend who knows his laptop A60 closing unexpectedlly... (she says that he stopped after a few minutes, or when she tried to open Firefox)

  Details of system
  Toshiba Equium A60-199 Model No.: PSA67E-00J00C8J
  18 GB free & 19 GB used
  512 MB OF RAM
  CPU Celeron 2.93GH

  Running Windows XP Home
  NIS 2006

  I took a look at distance and was about 30 minutes without any problem using FF logmeinitreach... There was nothing showing in the event log manager, for the time of day, that it would close down all before... so I was wondering if it is a faulty power supply?

  Everythng is going on well just clicked on the analysis of complete system of Norton Internet security which has not been run in a long time and the PC, stop NOW, it will not restart everything. ??

  Apparently she can hear some buzzing but nothing happens... (which I think might well be the blow fan)

  Advised her to let a little and about 2 hours later, she was able to turn it back on... I wonder if it could be overheating. ??

  Apparently he is 3/4 months than what was going on then ceased to happen and started again...

  Please can you give me some advice on how to clean it - other than to take it to a hardware shop

  I downloaded the A60 user manual and have themselves asked to confirm what show the lights - in an attempt to check overheating
  is the question...

  I've also read online "you can spray compressed air into the gills of admission but not airflow vents to help get rid of the dust and debris." I have looked at the manual and can see 2 lots of mouths... It is on the side and the other on the bottom, is e eintake the one on the side? I literally direct the air on side air intakes and the spray?

  When you ask him if she knows that when the fan is always, sometimes on, never an etc. she was thinking ot is ALWAYS on... who'd show up again overheating...

  Please notify
  tamba1

  Hello Cathy

  I also believe that the sudden stops are the result of overheating. If the dust is blocking cooling air flow grill is blocked and material can reach the critical temperature of material very fast. Sometimes you can start any application pre-installed, the CPU usage goes to the next level and laptop will suddenly stop.

  The laptop should be cleaned as soon as possible. If you have no experience with the disassembly procedure I recommend you contact the closest service and the laptop must be cleaned on professional way. It costs a little bit, but you can be sure that you use Notepad for a longer period of time.

  If you need the addresses and phone numbers to contact the ASP (authorized service provider) please visit http://eu.computers.toshiba-europe.com > support & downloads.

  Bye and good luck!

• someone at - it audio and video drivers for a HP m7170n?

  someone at - it audio and video drivers for a HP m7170n? We had to climb a new hard drive and there was no disk backup with the driver information.

  Thank you!

  Yes, I understand your point.

  I'll assume you have XP Media Center Edition, which was the operating system that is provided with your PC.

  The specifications of your system also specify that your PC comes with the video card ATI Radeon X300SE, correct?

  Below should be XP video drivers you need for this card:

  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/radeonaiw_mce.aspx?type=2.4.1&product=2.4.1.3.13&lang=English

  You can download the complete driver of features and software catalyst control center (the first download listed, or simply the WDM (Windows Driver Model) driver (without the catalyst control center software).

  Paul

• How to reinstall Advanced audio and video FX engine on a Dell computer?

  original title: video fx engine advanced

  I uninstalled audio multi-effects advanced and I have a dell with windows vista... How can I reinstall it or recover it?

  Hello

  What is the model number of the computer?

  Advanced audio and video FX engine are used to control the webcam and audio on a Dell computer. I suggest you to contact Dell technical support in order to download and install the advanced audio and video FX engine for the computer.

  http://support.Dell.com/support/index.aspx?c=us&l=en&s=Gen& ~ CK = mn

• Premiere Pro CC 2015 video / Audio won't play - Out-of-Sync Audio and video clock errors

  After the installation of Premiere Pro CC 2015 I am unable to actually play my video in the timeline.

  I must point out that the same video and audio files accurate work perfectly in my previous version of CC 2014.

  Usually when I hit the play button nothing will happen and then after a time it will stutter back and fourth between a small loop (no audio present) and give an error that says "clock Audio and video out-of-sync (instead of time) in"Adobe Player.

  I tried full uninstall and reinstall Premiere Pro CC software 2015 without success. I also tried to delete all the preferences of Premiere Pro to my settings user without success. I should also mention that after effects CC 2015 is oddly also often send me errors do not have enough executives, so I'm not sure if they are related. Once more, the CC 2014 version works perfectly.

  For reference the video file is a .avi with Xvid compression and sound is a .wav. These have always been used exactly the same with CC in 2014 without problem.

  Computer:

  8.1 - fully updated for Windows

  NVIDIA GTX 780 video card

  32 GB of ram

  3770K i7 processor

  All Nvidia drivers are also updated.

  I also ran a full virus and malware scan just in case for some strange reason, that was at fault, and I ran into zero issues. Media Encoder, Photoshop, and Illustrator CC 2015 that all seem to work great.

  I am quite technically savvy and this one left me speechless, that really stinks that I was looking forward to the potential improvements to speed updates. That's life.

  Matt Borchert wrote:

  Nothing seems to be enabled. The CAD is what is selected in CC 2015 as shown in the image above. It is the only available thing to choose, and I can't select None or disable.

  Thank you.  In 2015, CC, you can click on the settings... button in the Audio hardware preferences.  Then in the record of the OS dialog box tab, you can disable manually (for example, right-click and choose the appropriate option) the SPDIF input.  It is only a temporary workaround until get out us a patch with a fix, but let me know if it works for you.

• Audio and video automatically not bound

  For some reason any settings have been changed in the version of Premiere Pro cc that I work in 2014.  As I drag the clips in, my audio and video are not related.  First tried to highlight all the parameters and bind, but the option was not yet there. I also tried to connect individually and the option was there, but he did not.  Can someone tell me why my clips are coming in my sequence not related and how to fix it?

  the button "linked" the selection is disabled on the mounting Panel?

  

• Audio and video on the same page.

  Is it OK to have a separate audio and video file on the same page?  Both are on AutoPlay without control, but when I try this audio setup crack to override the video, stopping the video a few seconds later.

  I guess I could try and integrate audio into video but if I had not I was not.

  Any suggestion or help is appreciated.

  Thank you

  Ryan.

  You can't play both audio and video at the same time, you will need to merge them.

  Neil

• How to reset the function that allows tracks audio and video to align with the other tracks on the timeline

  Somehow, I have disabled the feature that allows to drag and draw audio and video tracks on the timeline to other titles or positions of import.  Is the only project that was hit, and everything that I can think is that when executing some other keyboard shortcuts, I accidentally performed a shortcut that turned this feature off.

  You want to say, "Snap"? Press "on the keyboard, or press the snap button in the timeline panel.