Equium A60-692 - no power and removing the HARD drive

The power has gone on my A60-692, the adapter is ok but there is just no no LED on the laptop. I had to get replaced a few years ago so maybe it is related to that of the power connector.

I took to a local repair place, he said, it would cost more to fix this, so I should really find it useful laptop only think about recover my data.

Is it really so hard to fix these things?
How hard is it to make the hard drive out, & how would then access down my data?

Thank you
Dave

Hello

> I took to a local repair place, he said, it would cost more to fix this, so I should really find it useful laptop only think about recover my data.
I agree with the authorized service provider. My personal opinion is that it s a malfunction of the motherboard and it is a very expensive part. Besides, Equium A60 is pretty old model so it would be better buy you a new laptop and recover your data.

> How difficult is it to make the hard drive out, & how would then access down my data?
It of not difficult, but I m really wondering why you need access to these data. You don t have a backup? In my opinion the backup is the most important thing you need to do on a computer.
Anyway, normally on the underside of your laptop there is a HARD drive cover which is guaranteed by one or two screws. You must remove this cover and then you can see the HARD drive and you're able to remove it.
Also buy an external HARD drive enclosure where you can install the HARD drive. Then you can connect it to another computer to back up your data. ;)

Tags: Toshiba

Similar Questions

  • U430 power and key flashes after removing the hard drive

    Hello world

    I just bought a U430 touch and try to put in an (Sandisk Ultra Plus 256 GB) SSD.

    I followed the instructions on how to open the lid and remove the hard drive as described in the maintenance manual. I created a USB startup disk and changed the order of boot from USB. But when I try to press the Novo key to then proceed with the installation of Windows, the power light and keyboard just begins to Flash slowly. I tried it turn instead to use the Novo key and the same thing happens.

    I tried to do it with and without the key USB is plugged. I also then put the old hard drive and put the top back on and he always does. I thought maybe that just means that it is in mode 'sleep' but by pressing the power or by pressing the keys does not help.

    Can someone help me please?

    Thank you.

    Pretty beast feeling right now. The memory seemed to bottom, but it wasn't.

  • Equium A60-155: remove the HARD drive

    I am interested to remove the hard drive from the laptop so that I can save the data.

    Anyone know where I can get instructions on where it is located?

    I looked at the 'User Guide' section of the Web site, but it does not contain the information.

    At the moment the machine is blue Windows to load testing.

    Hello

    In my opinion, we must open Notepad.
    In this case, it of necessary to carefully remove the covers, the keyboard and the screws that put him at the bottom of the unit.
    Please Note: you will lose the warranty if you open Notepad.
    But if your warranty is still valid, you should ask the ASP for the instruction or detailed information.

    Good bye

  • Remove the hard drive and optical drive on HP pavilion 500-164

    Hello

    I was eager to build a new computer and was hoping to use the hard drive and the optical drive from the Hp Pavilion 500-164 to reduce their costs. I'm confused as to how to remove the optical drive, because I removed the two screws on the left and don't know how to get to the other side as it wouldn't come out. When you remove the hard drive, the SATA cable wouldn't come off, so I stopped here and would like some advice on how to remove the hard drive from its Bay.

    Thank you

    Hello

    Please use the following guide:

    http://support.HP.com/us-en/document/c04100685

    Kind regards.

  • I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

    Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

    I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

    I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

    Any help would be welcome.

    Thank you!

    So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

    Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

    Adobe Lightroom - find moved or missing folders and files

  • Cannot physically remove the hard drive from the Pavilion dv4-1430us

    The disk hard origianal in this Pavilion dv4-1430us makes mechanical noises, so I will try to replace it with a new one.  I checked the owner's manual supplied with the dv4-1430us, and it gives these instructions (here condensed): 1) remove the power cord and disconnect the battery, 2) remove the hd plastic cover, 3) remove three screws of hard drive now the hd casing in place and 4) pull hard hd tab to the left then go out.

    The problems are: A) there is no hard drive to draw labels, and B) after you remove the three screws, can't do the hd if I push on it to move to the right or remove it from the left.  I don't want to use tools like screwdriver large flat blade or bars of little Crow because it seems like that would probably break something.  Does anyone know how to remove the hard drive of this particular model without breaking something?

    HaggisCat,

    Thanks for a very detailed and quick response.  It turns out the indications that I read in the manual, your statements and mine were all in line to exert a force on the hard drive in the direction indicated by the red arrow on your image.  (A picture is worth a thousand words and your supplied photo clarity that my summary of instructional text has not.)  I decided to take a picture of the entire hard drive in my dv4-1430us (see below) to show that there is no close tab Mylar pull, as there is on the photo you condition.   (The same gray metal tab that appears in your photo, but no mylar tab).

    Apparently my dv4-1430us had some differences at its Assembly of HD compared to yours.  As you can see, the structural elements that surround the HD are very similar to those of your photo, but there is no narrow mylar like in your photo tag.  There is a dark mylar or similar film plastic on top of my HD, and there is a triangle of silver color at the bottom right of this film that points in the same direction as your red arrow.  I tried lifting up the end of this film, mylar and pulling that direction (to the right in this picture), but a part of it (in the upper right corner of this photo) began to tear.  As the film seems to only be glued on the top edge of the caddy HD (also called frame or cage in some articles), I doubted that the show was strong enough to eliminate the stress of a closed winching.  A comrade who has put a video on YouTube showing this procedure also indicated that he had torn this layer of film when he first attempted to remove the HD.  Because I assume that the dark film has a purpose (static protection?)  I gave up shooting at the right edge of the film.

    However the consistency of the instructions in the manual, the instructions on this YouTube video and instructions in your answer on the direction in which the Assembly needed to move HD gave me the courage to put a force pushing the HD in the direction of your red arrow.  To do this, I placed the tip of a flat blade screwdriver large (blade about 5/16 "wide) at the points indicated at the ends of the two yellow arrows in my picture.  In these positions, the blade of screwdriver pushed against the HD box and not the hard drive itself.  Each of these two places, I gave him some very closed but controlled scrimmages, and HD finally moved in the direction of your red arrow as it is supposed to.  I then lifted all of the HD and replaced the HD without incident.

    The action drag the new HD in place was much easier that it was removing the original HD for the first time.  It was perhaps because of some hard rubber padding that has been placed on each side of the original HD assembly that makes for a very tight fit.

    I hope that this description is useful for others who do not have used mylar tab in their computers laptops dv4 and those whose HD assemblies are very tight in.  Thanks again for your quick response that gave me enough comfort to move forward.

  • If I remove the hard drive from my Mac book will find my Mac still works

    One of my buddies and ME are supporting it because im trying to say that if you remove the hard drive of a Macbook, find my Mac no longer works, even if you get a new hard drive and connect it to the Internet. He said, that it only stops working if it is not connected to the internet, and I know it's true, but I want to know if my theory is correct,

    If you remove the HD there is nothing to identify your Mac then FindMyMac.

    To use FindMyMac the Mac must be connected to the internet and FindMyMac must be enabled in system preferences > iCloud. This requires Mac be signed in iCloud.

  • Satellite Pro P300 - remove the HARD drive to make a backup?

    My P300 went to my local store to repair for a network card problem. I thought it was just a software problem or driver, so I wasn't worried that my machine is still under warranty. After investigation, they stated that they could not resolve the issue, so would be to reformat and reinstall the OS, they thought they should solve the problem.

    To my horror, I found that they had broken the seals of guarantee and open to the top of the machine. They claimed the only way to save the P300 before reformat it, is to remove the HARD drive!
    Is this true?
    (It turns out that a broken chip is to blame, but because they violated the warranty, Toshiba will not touch!)

    Can anyone say about this the removal of HD to support it please?

    Hey,.

    Normally it of not necessary to restore the factory settings with to remove the HARD drive but don t you worry about this. The laptop can still be opened from a service provider authorized without losing the warranty.

    I also put t know why they did, perhaps they have checked the material. It would be possible because they have professional diagnostic tools.

    But interesting to know whether or not your problem is now resolved?

  • Satellite P10 804: how to remove the HARD drive?

    I would like to remove the internal hard disk of 60 GB of my satellite P10 804 and replace it with a bigger drive, but cannot find a way to enter in the case of removing the HARD drive.

    Does anyone have the details on how to do?

    Hello

    To my knowledge, the HARD drive must be placed under the optical dirve.
    To remove the HARD drive, first remove the battery and the optical drive, and then follow the steps below:

    1. remove the four black screws that anchor the shield of aluminum covering the HARD drive and pull it out.
    2. gently pull on the HARD drive the front panel of the computer to disconnect the system board, then pull it out.
    3. remove the four silver screws that attach the HARD drive to the HARD disk case.

    But be careful. If you have no experience ask someone with more experience in these replacements.

  • Need help to remove the hard drive from a Satellite Pro M10

    Hi, a good will would point me in the right direction. I am trying to remove the HD from a satellite pro M10.
    I discovered the net without success.

    A diagram with being usefully etc.

    kind regards J

    Hello

    I can't give you a diagram or something, but I can give an indication to take a look on the front left side of your machine. On this corner of the left side under the volume control is a small blanket where the HARD drive is in. You need only to unscrew the 2 screws that are accessible when you turn on your machine and and look at the bottom of your machine. Do you know what I mean?

    When you remove these 2 screws, you need to remove the HARD drive by taking some screwdriver flat-blade and paste between the disc cover and HARD case. Then carefully remove the cover of the HARD drive and you can recover the HARD drive with the cover and exchange it.

    Voila, your hard drive West. It s is not difficult at all.

    But if you still have some questions then request.

    Welcome them

  • Compaq presario s4100nx: how to remove the hard drive compaq presario s4100nx

    I removed the ropes attached to the hard drive. I also removed the 2 screws on top. but the hard drive doesn't go out. are there instructions for this particular model and where can I find it?

    Mahjal, welcome to the forum.

    Here's a guide that should help you remove the hard drive.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Satellite L300: How to remove the HARD drive password

    Hello world. I have a problem with my Satellite L300. I put a password on the HARD drive and now I want to remove it, but it doesn't let me,
    So any ideas on how to completely remove the prompt to "enter the password for HARD drive built-in user" would be very appreciated.

    Thank you very much
    Martin

    Hello

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56069

    The user wrote:
    + It's usually cycle which starts when you press or to start to change this option. +.
    + Once, I found that I was out. +

    Hope this is the info that you need to remove the HARD drive password...

  • S35dvd: How to remove the HARD drive?

    Can someone tell me how to remove a hard drive from a s35dvd please? I can't find a manual anywhere, and I need to remove the drive to try to remove a virus load that I can't remove it with windows running or even in safe mode.

    Thank you

    Hello

    Unfortunately this Toshiba device it unknown to me and I don t have found all documents on the replacement HARD drive.
    But as far as I know, there should be only 2 possibilities how to do to remove the HARD drive.
    1.) under the disk HARD is placed at the bottom of the unit and you should only remove the cover of the HARD drive.
    Or

    2.) HARD drive is placed in the Notepad. In this case you will need to Remover the keyboard and some covers to replace the HARD drive

    Well, I can give you only that info. I think that if you want to know the detailed instructions, you should contact Toshiba service partner because it has a more detailed information on these cases.

  • DV6-3034sl: remove the hard drive

    I need to remove the hard drive in order to retrieve the data in it. I removed the four screws but the coverage does not move, I would avoid breaking the plastic eventually. Thanks in advance for any help

    Hi @diuni

    Welcome to the HP support community! I see that you are looking to remove your hard drive and I'll be happy to help you with that. Here if your Maintenance and Service of Guide for your model. On page 52, you'll find instructions on how to remove the hard drive.

  • Satellite A30 - how to remove the hard drive

    Hi, new here...

    Can someone tell me how to remove the hard drive in my Tosh A30...

    Thank you
    captainp

    Hi Tim,.

    The hard drive on your SA30 is in the optical drive, but slide the optical drive out of its housing (undo the F5 marked screws on the bottom of the laptop).

    The hard drive will be visible fixed with four Phillips head screws that need to be removed (two on each side of the hard drive. With the removed screws, gently slide the hard drive toward the front of the laptop to disconnect its connector and carefully pull it out of its Bay.

    HTH

Maybe you are looking for

  • Cannot find my mail to get tab

    Address tab, tab e-mail get etc. are missing from the top

  • remove the foxfire/google homepage

    On a PC running XP with FF17, I get the FF/Google search for my home page, even after I reset browser.newtab.url on www.google.com. Whenever I restart FF, he returned to the FF/Google page. Also when I get the FF screen that tells me that it's so goo

  • Installed boot camp at halfway and do not appear in disk utility. But it takes place in the hard drive.

    I am really frustrated and tried to solve the problems of this days no result. Would be very grateful for advice please! So I went before partition my MacBook Air using boot camp. It only allowed me to partition of 22 gb because of space constraints.

  • windows viruses have not start or open

    Windows xp the computer for some reason any virus and wont let me get into windows had this problem once before and can not remember how I fix I know to start in safe mode, but then what I do I'd like to come back to factory settings and no viruses d

  • Windows 7 office transformed into icons Word icons

    Suddenly, I saw all my desktop icons turn into Microsoft Word icons with a .lnk file extension How can I fix this? I tried restoring the system several times, but it does not work? Is there a simple solution for this? JH